NDT Inspection Services in New York

Short answer: Atlantis NDT provides non-destructive testing inspection across New York State: ultrasonic thickness surveys and corrosion mapping, phased array (PAUT) and TOFD weld inspection, radiography through radiography crews licensed in New York, magnetic particle, penetrant, visual and eddy current testing, plus the NDE that API 510 pressure vessel, API 570 piping and API 653 storage tank programmes rely on. Work is performed by ASNT-certified technicians under ASNT NDT Level III oversight, crews are mobilised to your site, from New York City and Long Island to Albany, Syracuse, Rochester and Buffalo, and results arrive as a code-referenced digital report.

New York's inspection market looks different from the Gulf Coast. The state has no operating petroleum refinery, but it has large fuel terminals around New York Harbor, the Hudson at Albany and the Great Lakes ports; three operating nuclear generating stations on Lake Ontario; the large hydropower plants at Niagara and on the St. Lawrence; one of the biggest district steam systems in the world under Manhattan; thousands of bridges exposed to road salt and freeze-thaw; and an upstate manufacturing base that builds turbines, semiconductors, aerospace systems and glass. New York also splits some regulation between the state and New York City. This page maps the market by region, explains the agencies that shape inspection scope, and states what Atlantis delivers and what it does not. When you are ready, request a New York inspection quote with the asset, method, code and dates.

Where inspection work is in New York

Direct answer: New York inspection demand concentrates in the New York City and Long Island metro area (terminals, utilities, steam, bridges and construction), the Hudson Valley and Capital Region (Port of Albany terminals, power and advanced manufacturing), Central New York (Syracuse and the Oswego nuclear sites), and Western New York (Rochester, Buffalo and Niagara Falls industry and hydropower).

New York City, Long Island and the harbor

Petroleum products reach the metro area by tanker, barge and pipeline and are stored at terminals in Brooklyn, Queens, Staten Island and on Long Island, with more terminals across the harbor in New Jersey. Those tank farms run API 653 programmes. Con Edison's Manhattan steam system, utility gas mains, power plants in Queens and on Long Island, and building boilers and pressure vessels add piping, weld and thickness work. Construction is the other big driver: structural steel welding on high-rise and infrastructure projects needs UT, MT and VT under the engineer of record's specification. In New York City, structural special inspections are performed under the Department of Buildings' special inspection rules by registered agencies; where your project needs one, ask during scoping how NDT fits under that agency's responsibilities. See third-party inspection in New York, New York tank inspection and New York weld inspection.

Hudson Valley and the Capital Region

The Port of Albany and Rensselaer hold large petroleum terminals that supply much of upstate New York and New England by barge, rail and truck, and their tank populations need floor scanning, shell surveys and weld inspection. The Capital Region also has a deep manufacturing base: gas and steam turbine manufacturing in Schenectady, semiconductor fabrication in Malta, the Watervliet Arsenal, naval nuclear research and power plants along the Hudson. Indian Point in Westchester County shut down in 2021 and is being decommissioned. Typical scopes are tank inspection at terminals, weld and fabrication NDE for heavy manufacturing, and boiler and piping thickness surveys at plants. See practical NDT in Albany.

Central New York: Syracuse and the Oswego nuclear sites

On Lake Ontario near Oswego, the Nine Mile Point and James A. FitzPatrick stations form one of the largest nuclear generating complexes in the Northeast, with the R.E. Ginna station further west near Rochester. Nuclear NDE is controlled by owner programmes and ASME Section XI, so we support those sites only within the owner's qualification requirements, typically on balance-of-plant and non-safety-related scopes. Syracuse adds defence electronics and manufacturing, and a large semiconductor project in Onondaga County is bringing major construction to the region, with structural, piping and pressure equipment that needs fabrication and installation NDE. See NDT consulting in Oswego and nuclear NDT consulting in Oswego.

Rochester and the Finger Lakes

Rochester's industrial base includes optics, imaging and chemical production at the Eastman Business Park, precision manufacturing and food processing, with glass and ceramics manufacturing in Corning to the south. Inspection here is weighted toward boiler and pressure vessel NDE, process piping thickness surveys, weld inspection for fabricators, and plant utilities. See NDT consulting in Rochester and practical NDT in Rochester.

Buffalo, Niagara Falls and the Western New York lakeshore

Western New York combines chemical plants in Niagara Falls, the Robert Moses Niagara hydroelectric plant, petroleum terminals on the Buffalo waterfront, steel fabrication and heavy manufacturing, aerospace and motion-control suppliers around Buffalo, and grain and bulk handling. Lake-effect winters, road salt and freeze-thaw cycles drive atmospheric corrosion and make outdoor NDT a seasonal planning problem. Typical scopes include penstock and gate weld inspection at hydro sites, chemical-plant vessel and piping NDE, tank inspection and structural steel. See NDT consulting in Buffalo, Buffalo refining and fuels and Niagara Falls.

North Country and statewide infrastructure

The St. Lawrence-FDR power project at Massena, paper mills and aluminium production in the North Country, and interstate gas pipelines crossing the Southern Tier and Hudson Valley add work across the state. New York's bridges, from the Governor Mario M. Cuomo Bridge and the Verrazzano-Narrows to thousands of state and county spans, need steel weld inspection on rehabilitation, and offshore wind projects are using port facilities in New York City and the Capital Region for staging and fabrication.

NDT methods we deliver in New York

Direct answer: Atlantis delivers UT thickness and corrosion mapping, PAUT, TOFD, conventional shear-wave UT, radiography through New York-licensed radiography crews, MT, PT, VT, eddy current and MFL tank floor scanning. The table maps each method to typical New York applications and the code usually cited; final selection is agreed with your inspector of record during scoping.

Every technique runs on a written procedure reviewed by an ASNT NDT Level III, and every technician is certified under an SNT-TC-1A written practice. Where your site requires its own procedures or a qualification demonstration, we work to those. Method background is on our New York pages for ultrasonic testing, radiographic testing, magnetic particle testing, penetrant testing, eddy current testing and visual testing.

API 510, 570 and 653 inspection support in New York

Direct answer: Atlantis performs the NDE that API 510 pressure vessel, API 570 piping and API 653 storage tank inspections rely on, including thickness surveys, weld examination, tank floor scanning and visual examination, and hands documented results to your API-certified Authorized Inspector, who remains the inspector of record and signs the inspection report.

API 653 storage tanks. Because New York has no operating refinery, tanks are the largest API scope in the state: terminals in the harbor, at Albany and Rensselaer, on the Buffalo waterfront and on Long Island, plus fuel storage at airports, utilities and industrial plants. For out-of-service inspections we perform MFL floor scanning with UT follow-up, shell course thickness surveys, shell-to-bottom and repair weld examination and nozzle and sump work; for external inspections we survey shell thickness, examine roof, shell, foundation and appurtenances, and take settlement measurements presented against API 653 Annex B. See API 653 tank inspection support and New York tank inspection.

API 510 pressure vessels. Chemical plants in Niagara Falls and Rochester, pharmaceutical and food plants, power stations and semiconductor utility systems operate pressure vessels that owners manage under API 510 or the National Board Inspection Code. We carry out external visual examination, UT thickness at CMLs, corrosion mapping, PAUT or TOFD on welds of concern and MT or PT on nozzles and attachments during entries, reported against previous surveys. See API 510 pressure vessel inspection support and New York pressure vessel inspection.

API 570 piping. Terminal transfer lines, chemical process piping and plant utilities are surveyed against your circuit drawings, with injection-point and deadleg scanning and CUI screening where insulation is removed; freeze-thaw cycles make wet insulation a common New York problem. See API 570 piping inspection support, New York piping inspection and New York corrosion inspection.

What we do not do: Atlantis does not sell risk-based inspection (API 580/581) or fitness-for-service (API 579) assessments, and it does not act as the Authorized Inspector. Our reports give your engineers clean, traceable data; the integrity decisions built on it stay with your programme.

Turnarounds, shutdowns and planned inspection

Direct answer: In New York, planned inspection is driven by terminal tank programmes, power-plant and hydro outages, chemical-plant shutdowns and construction schedules. Atlantis joins the planning stage, agrees methods and procedures, and mobilises crews to your site on dates fixed during scoping, so NDE does not become the critical path.

A good outage scope still has three layers: on-stream work before the shutdown (thickness surveys, external visual and in-service weld examination), work that needs entry or isolation during the outage (vessel internals, tank floors, penstocks, exchanger shells), and re-examination of every repair weld before start-up. For terminals, the rhythm is different: tanks rotate out of service one or two at a time, so floor scanning and shell work have to keep pace with cleaning and repair contractors. For construction projects, NDE is tied to fabrication and erection sequences, and the engineer of record sets acceptance criteria.

New York specifics: upstate winters limit outdoor PT and MT and make couplant choice and heated enclosures part of the plan, so many owners push tank and outdoor work into the April to November window; New York City work involves street permits, building access and tight laydown space; many maritime facilities require TWIC cards; and power, chemical and terminal sites need site-specific orientation and contractor prequalification completed before mobilisation. Plan a New York outage or tank programme.

New York regulations that shape inspection

Direct answer: In New York, boilers and the construction of unfired pressure vessels fall under the Department of Labor Boiler Safety Bureau (with the NYC Department of Buildings covering boilers in the city), radioactive materials under the Department of Health (and the NYC health department within the city), intrastate gas pipelines under the Public Service Commission with PHMSA, process safety under federal OSHA, and petroleum and chemical bulk storage under NYSDEC.

Boilers and pressure vessels: NYS DOL Boiler Safety Bureau

New York regulates high-pressure boilers under Industrial Code Rule 14 (12 NYCRR Part 14), administered by the Department of Labor's Boiler Safety Bureau, with periodic inspections by state inspectors or authorised insurance-company inspectors. The same rule sets construction requirements for unfired pressure vessels, which must be built and stamped to ASME Section VIII and registered with the National Board. In-service vessel inspection beyond that is generally driven by owners, insurers, OSHA PSM where it applies and API 510-based programmes. Within New York City, the Department of Buildings handles boiler inspection and filing. Confirm the requirements for a specific item with the Bureau or the city.

Radiography: Agreement State with a state and city split

New York is an NRC Agreement State. Licences for radioactive materials, including industrial radiography sources, are issued by the New York State Department of Health, whose radioactive materials programme absorbed the former Department of Labor programme; the radiography rules sit in Industrial Code Rule 38. Within New York City, the city Department of Health and Mental Hygiene runs its own radiation control programme, so confirm the licensing authority for your site. Atlantis does not claim to hold a New York radioactive material licence: radiography on Atlantis scopes is performed by radiography crews licensed in New York, working to reviewed procedures under our Level III. In dense urban sites where an exclusion zone is impractical, PAUT or TOFD may be an alternative if your code and owner accept it.

Pipelines: Public Service Commission and PHMSA

The New York State Public Service Commission, through the Department of Public Service, runs the state pipeline safety programme for intrastate gas transmission and distribution in partnership with PHMSA, which regulates interstate gas and hazardous liquid lines under 49 CFR Parts 192 and 195. Girth-weld inspection on new construction normally follows API 1104. See our pipeline inspection services and New York pipeline inspection.

Process safety and bulk storage

Private-sector employers in New York fall under federal OSHA (the state's PESH programme covers public employees), whose process safety management standard (29 CFR 1910.119) requires written inspection and testing procedures, inspection following recognised and generally accepted good engineering practice, and documentation of each inspection. For tanks, NYSDEC administers the Petroleum Bulk Storage rules (6 NYCRR Part 613), Major Oil Storage Facility licensing (Part 610) and Chemical Bulk Storage rules, which include inspection and recordkeeping requirements, alongside EPA's SPCC rule (40 CFR Part 112), which expects tank integrity testing to an industry standard such as API 653 or STI SP001.

Inspection reports clients can use

Direct answer: Every Atlantis inspection in New York produces a digital report built in our own reporting platform: each reading, indication and photo tied to the asset, location, procedure, technician certification and instrument calibration, with acceptance criteria quoted from the governing code. Reports are reviewed under ASNT Level III oversight before release.

Inspectors of record, boiler inspectors, NYSDEC, insurers and engineers of record reject reports for predictable reasons: thickness readings that cannot be traced to a location, indications without a procedure and acceptance criterion, technicians whose certification cannot be shown, and instruments without calibration records. Our reporting software is designed around those failure points, with field capture (offline where needed), structure per asset and location, and exports your inspection data management or project document system can import. Read more on our NDT inspection software page, or compare options in best NDT reporting software 2026.

The data can go further than a PDF. Results can feed scheduling, certification tracking and invoicing in Atlantis ERP (see NDT ERP in New York State), or be placed on a 3D model of the tank farm, plant or structure in our digital twin platform (see digital twins in New York State). That route from Level III-led inspection to digital report to optional twin is not offered as one package by the large inspection firms.

Cities we cover across New York

Direct answer: Atlantis mobilises inspection crews to client sites anywhere in New York State, from Long Island to Buffalo and the North Country. Atlantis has no physical office in New York, so crews travel to your plant, terminal, yard, construction site or right-of-way, with the schedule agreed during scoping. The pages below cover specific cities in more depth.

• New York City and Long Island:third-party inspection, tank inspection, piping inspection, weld inspection, pressure vessel inspection, NDT training in New York City and practical NDT in New York.
• Capital Region and Hudson Valley:Albany, plus Rensselaer, Schenectady, Troy and Poughkeepsie by arrangement.
• Central New York:Oswego, NDT ERP in Oswego, plus Syracuse and Utica by arrangement.
• Rochester and Finger Lakes:Rochester, NDT ERP in Rochester and Corning by arrangement.
• Western New York:Buffalo, NDT training in Buffalo, practical NDT in Buffalo, Niagara Falls and NDT ERP in Niagara Falls.
• North Country and Southern Tier: Massena, Watertown, Binghamton and Elmira by arrangement.

Related New York hubs: NDT consulting in New York and NDT consulting across New York State for Level III services, written practices and procedures, NDT training in New York for ASNT SNT-TC-1A-based technician training, and practical NDT in New York State.

How to request inspection

Direct answer: Send the asset, method, location, governing code, dates and the deliverable you need. Atlantis replies with clarifying questions or a scoped quote, confirms procedures and technician certifications, mobilises the crew on the agreed date and delivers a Level III-reviewed digital report.

1. Tell us the job. Asset type (tank, vessel, piping, pipeline, structure), method if known, site location in New York, governing code (API 510/570/653, ASME, API 1104, AWS D1.1/D1.5), target dates, quantity and report format. Send your New York RFQ.
2. Scoping call. We confirm method and technique, access (scaffold, rope access, insulation removal, entry permits, city permits), site safety requirements and whether radiography or an ultrasonic alternative suits your site.
3. Quote and procedures. You receive a scope and quote, plus the procedures and technician certifications for review by your inspector or engineer of record.
4. Mobilisation. Crews complete site orientation and prequalification and mobilise on the date agreed during scoping.
5. Inspection and daily updates. Findings that need immediate attention are reported to your representative the same shift.
6. Report. A Level III-reviewed digital report, traceable to code, procedure, technician and instrument.

Frequently asked questions about NDT inspection in New York

Which NDT inspection services does Atlantis offer in New York?

UT thickness and corrosion mapping, PAUT, TOFD, conventional UT, radiography through New York-licensed radiography crews, MT, PT, VT, ET and MFL tank floor scanning, plus NDE support for API 510, API 570 and API 653 programmes and pipeline inspection, under ASNT Level III oversight.

Do you have an office in New York City?

No. Atlantis does not operate a physical office or lab in New York. Crews are mobilised to your site anywhere in the state, with the schedule agreed during scoping.

Can you perform API 653 tank inspections in New York?

We perform the NDE an API 653 inspection relies on: MFL floor scanning with UT follow-up, shell thickness, weld examination and settlement measurement. Your API 653-certified Authorized Inspector remains the inspector of record and signs the report.

Does New York State inspect pressure vessels?

Industrial Code Rule 14 regulates high-pressure boilers and sets construction requirements for unfired pressure vessels (ASME Section VIII and National Board registration). In-service vessel inspection is mostly driven by owners, insurers and API 510 programmes. Confirm specifics with the Boiler Safety Bureau.

Who regulates industrial radiography in New York?

New York is an NRC Agreement State. The State Department of Health licenses radioactive materials, including radiography sources, and New York City runs its own radiation programme within the city. Radiography on our scopes is done by crews licensed in New York.

Who regulates pipelines in New York?

The Public Service Commission runs the state pipeline safety programme for intrastate gas lines with PHMSA; PHMSA regulates interstate pipelines directly under 49 CFR Parts 192 and 195.

What tank rules apply to New York terminals?

NYSDEC's Petroleum Bulk Storage, Major Oil Storage Facility and Chemical Bulk Storage rules, plus EPA's SPCC rule, which expects tank integrity testing to a standard such as API 653 or STI SP001.

Can you inspect structural steel welds on New York City projects?

Yes, UT, MT and VT of structural welds are within our scope, to the engineer of record's specification. Where the project needs a registered special inspection agency under DOB rules, agree during scoping how our NDT fits under that agency.

How much does NDT inspection cost in New York?

Atlantis quotes on request. Cost depends on method, number of locations or welds, access and permits, travel, crew size, schedule and the report format required. Send the scope and you will get a written quote.

Can you work at nuclear plants on Lake Ontario?

Only within the owner's programme and qualification requirements under ASME Section XI, usually on balance-of-plant scopes. Discuss the specific scope with us and the owner's NDE group.

Will our inspector or auditor accept your reports?

Reports quote the procedure, acceptance criteria and code, list technician certifications and instrument calibration, and are reviewed under ASNT Level III oversight. Agree the format with us during scoping.

Do you offer RBI or fitness-for-service assessments?

No. Atlantis does not sell API 580/581 risk-based inspection or API 579 fitness-for-service assessments. We provide the inspection data those programmes use.

Get a New York inspection scope

Whether you have a terminal tank coming out of service in Brooklyn or Rensselaer, vessels due at a Niagara Falls chemical plant, structural welds on a Manhattan project, penstock welds at a hydro plant or utility piping in Rochester, the starting point is the same: tell us the asset, method, code and dates. Get a quote for NDT inspection in New York, or book a call with our ASNT Level III to talk through method selection first. Affordable. Accessible. Fully customizable. Also see all inspection services.

More Atlantis NDT services in New York

• NDT training and certification in New York
• Level III consulting in New York
• NDT ERP software in New York
• Practical NDT simulator in New York