Eddy Current Testing (ET) Services in Lagos 2026 — ASNT Level III Led
Atlantis NDT delivers professional Eddy Current Testing (ET) inspection services in Lagos from ASNT NDT Level II + III certified inspectors. Specialising in heat exchanger tube inspection, surface crack detection and conductivity testing. Serving Lagos's offshore, refining & petrochemical sectors with certified ET inspection teams. Lagos industrial corridor & West Africa hub. Our Lagos inspectors hold ASNT Level III certified qualifications, ensuring compliance with local + international standards.
Eddy Current Testing Method Overview
Eddy Current Testing (ET) is a core NDT method covered in detail at our ET pillar hub. Per ASME Section V, ASTM E-series, ISO 17635 + applicable method-specific standard. Atlantis NDT Level III approves every Procedure + signs off final disposition. Calibration block + reference standard traceable to NIST / NPL / PTB. Procedure pack + technique sheet + qualification block included.
Code Coverage + Dual-Scheme Inspector Cert
Code stack: ASME B&PV V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 1104 + 1169; ASTM E-series; ISO 17635/17636/17640/17643/17638; EN 13445/13480; NACE MR0175/MR0103; AWS D1.1/3.6; IACS Rec-20 marine. Dual-scheme inspector cert — ASNT NDT Level II/III (SNT-TC-1A 2024 + CP-189-2020) + ISO 9712 (third-party). Plus method-specific: PCN UK + ACCP + NAS 410 + EN 4179 aerospace + JSNDI + KSNT + AINDT regional.
Atlantis NDT Stack Integration
ET inspection in Lagos integrates with the full Atlantis NDT stack: Atlantis NDT ERP (asset register + cert tracking + audit-ready records), Digital Twin platform (3D defect overlay + RBI tier visualisation), Reporting Software (mobile + offline field capture with code-aligned templates), Atlantis NDT LMS + Atlantis NDT Academy (96% first-pass training pass rate, free retake-grade backstop), 3D Scanning Services (LiDAR + photogrammetry + drone capture), Atlantis AI for NDT (PAUT/RT/UT machine-learning defect classification with mandatory ASNT NDT Level III approval per ASME PCC-3).
Delivery Model in Lagos
On-site mobilisation 24-72h via Houston + Dubai + Mumbai + Singapore + London hubs. Remote procedure authoring + ASNT NDT Level III sign-off, 24-hour turnaround. Hybrid model — local Level II + Atlantis Level III remote oversight — common pattern for multi-region EPC + asset-owner customers in Lagos.
Free Consultation + Tailored Quote
Atlantis NDT publishes no pricing — pricing varies by region + scope + delivery model. Request your free 30-minute consultation with Atlantis NDT founder Anoop Rayavarapu (ASNT NDT Level III multi-method). Tailored Lagos quote within 24 hours. Affordable, accessible, fully customizable. See also Eddy Current Testing pillar, Lagos ERP, Lagos training, Lagos consulting.
Why Lagos generates ET demand
Lagos hosts the Dangote refinery and petrochemical complex — the largest single-train refinery in the world — alongside the Apapa and Tin Can port complexes, coastal terminals, and the fabrication yards at Snake Island.
Refinery exchanger bundles are examined with eddy current at every major turnaround — bobbin screening for wall loss across thousands of non-ferrous tubes, with array or rotating probes on the indications that matter.
Marine diesel engine components, turbocharger parts and shaft tapers are examined with eddy current during overhaul, where a missed crack ends up as a tow.
Above-ground pipeline facilities — pump and compressor stations — bring exchanger and cooler bundles into eddy current scope alongside the mainline programme.
Material verification and sorting — mixed stock, heat-treat condition checks — bring eddy current into fabrication QA alongside dedicated weld techniques.
What typically gets examined
In practice that means ET work across refinery and petrochemical units, storage terminals and jetty pipelines, fabricated structures from the island yards, and port equipment — with scope set by the damage mechanisms each asset actually runs, not by a standard menu.
Certification and acceptance in Lagos
NMDPRA oversight and owner specifications govern; the Dangote complex applies international codes with formal vendor approval, and local-content requirements under NOGICD shape team composition on most contracts.
Examinations themselves are performed to ASME Section V Article 8 and its tubing appendices, ISO 15548, and ASTM E243 for tube examination. The evidence chain — technician certification current on the day, instrument and reference block calibration, and the procedure revision in force — travels with every report, because that bundle is what an audit actually checks.
Working with Atlantis in Lagos
Atlantis delivers eddy current testing through inspection teams mobilised to site, working under Atlantis procedures with ASNT Level III oversight — we are straightforward that this is a mobilised model rather than a walk-in local office, because for planned inspection work that is usually the better arrangement anyway: the crew, procedures and equipment arrive matched to your scope. Read the ET service overview, see how results are recorded and retrieved, or tell us about the Lagos scope and we will respond with an honest view on mobilisation.