ASNT SNT-TC-1A NDT Training in Saskatoon, SK: Level 1, 2 and 3 Courses
Self-paced online NDT training to ASNT SNT-TC-1A, open to candidates worldwide. Start any time.
Local price for your country, pay with your local card, and course access opens automatically.
Atlantis NDT delivers ASNT SNT-TC-1A NDT training for employers and technicians in Saskatoon: Level I, Level II and Level III programmes across ultrasonic, radiographic, magnetic particle, penetrant, eddy current and visual testing. Courses are authored and supervised by ASNT NDT Level III professionals.
ASNT SNT-TC-1A training and certification for Canadian employers
Atlantis NDT trains NDT personnel to ASNT SNT-TC-1A and helps Canadian employers certify them under their own written practice. Courses are led by founder Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT, and run year-round.
What Atlantis NDT provides
- Level I and Level II training: ASNT SNT-TC-1A Level I and Level II courses in UT, RT, MT, PT and VT, plus PAUT and TOFD courses, for which conventional UT Level II or equivalent UT experience is recommended first. Course hours follow the SNT-TC-1A recommended classroom hours for each method and level.
- Level III exam preparation: Preparation for the ASNT NDT Level III Basic and Method examinations, and for Level III examinations under an employer's written practice.
- Employer certification under your written practice: As your outside-agency Level III, Atlantis NDT's ASNT NDT Level III administers and grades the general, specific and practical examinations in UT, RT, MT, PT and VT, and helps you document each technician's training, experience, vision and examination records so that you can certify them under your written practice.
- Written practice: We write an SNT-TC-1A written practice for your company or review the one you have, so that your training, examinations and certification records follow it.
- ASNT central certification: Exam preparation for candidates applying to ASNT for ASNT NDT Level II (MT, PT, RT, UT, VT) or ASNT NDT Level III, which ASNT examines and certifies.
Who certifies
- Under SNT-TC-1A. Your employer certifies you, under its own written practice. The certification stays with that employer; a new employer recertifies you under its written practice.
- Under ASNT central certification. ASNT examines and certifies you for ASNT NDT Level II or ASNT NDT Level III, and the certificate is yours.
- Atlantis NDT. Trains you and, as your employer's outside-agency Level III, examines you and prepares the certification records. A course on its own never certifies anyone.
Who it is for
Employers whose customers, contracts or codes specify ASNT SNT-TC-1A or another employer-based scheme, for example:
- Maritime and shipbuilding. Shipyards, ship repair and marine service companies whose owner, contract or class requirements accept an SNT-TC-1A written practice.
- Nuclear supply chain. Fabricators and service companies doing nuclear supply-chain and US-code work that specifies SNT-TC-1A. This is not a route into in-service inspection at Canadian CANDU stations, where the licensee's inspection program sets the certification its NDT personnel must hold.
- Oil, gas and pipelines. Contractors and fabricators on US-owned or cross-border work, and crews that rotate between Canadian and US sites, where the client or code asks for SNT-TC-1A.
How the training runs
Courses run year-round and enrolment is open all year. Theory is online and primarily self-paced, with access from the moment you enrol and Level III support for questions. Practical training runs in the Practical NDT simulator and in person at your facility, where the practical examination is taken on real specimens. Atlantis NDT has no training centre in Canada.
Ask about ASNT SNT-TC-1A training in Canada: tell us the methods, levels and number of technicians, and the scheme your customer or contract names.
If your job specifies CAN/CGSB-48.9712
CAN/CGSB-48.9712, an identical adoption of ISO 9712, is Canada's national standard for NDT personnel certification and a third-party scheme. A job that specifies it needs a certificate from the Natural Resources Canada NDT Certification Body (NRCan NDTCB) or CWB Group, and method training from one of their Recognized Training Organizations (RTOs). Check the job posting, contract or client specification before you choose a course.
Atlantis NDT is not an RTO. Atlantis NDT is not a Recognized Training Organization for NRCan or CWB Group. Our courses do not count toward NRCan or CWB certification, so take CAN/CGSB-48.9712 method training with an RTO.
NRCan or CWB Group. CWB Group states there is no difference in validity, recognition or technical requirements between the two. The NRCan NDTCB requires at least 40% of course time to be practical. NRCan written exams are taken in person at its Authorized Examination Centres; CWB Group offers remote invigilation of written exams.
The CGSB has closed. The Canadian General Standards Board ceased operations on April 1, 2026. It published the standard; it did not issue certificates. CAN/CGSB-48.9712 remains valid through its current cycle, and NRCan says its certification services continue without change.
Level 3 study support. NRCan allows CAN/CGSB-48.9712 Level 3 preparation by courses or by self-study, provided the candidate gives documentary evidence of training acceptable to the NDTCB. The NDTCB decides what it accepts, so confirm with it before you rely on our study support: ask about Level 3 study support.
Official sources, checked October 2026:
- NRCan: apply for NDT certification
- NRCan: Recognized Training Organizations
- NRCan: training requirements and prerequisites
- NRCan: Authorized Examination Centres
- CWB Group: making sense of NDT personnel certification in Canada
- CWB Group: NDT personnel certification
- Transport Canada: AC 573-003, trade standards for personnel working in approved maintenance organizations
Two training routes for Saskatoon, SK
I'm an individual technician
You want Level I or Level II in one method, or you are preparing for ASNT Level III. Theory is online and primarily self-paced, with access from the moment you enrol; your employer (or the employer you are joining) certifies you under its written practice, and the practical examination is administered by an ASNT Level III on real specimens. Send a course enquiry or read NDT training online first.
I'm training a company team
You need a crew trained, examined and certified to your SNT-TC-1A written practice, onsite at your facility or blended with online theory, with Level III oversight and an audit-ready file. See the SNT-TC-1A certification programme for NDT companies or request a company team training quote. We reply within one business day.
The Saskatoon inspection market
Saskatoon's NDT demand comes from potash mines and processing sites around the city, uranium producers headquartered here with operations in northern Saskatchewan, agricultural equipment and trailer manufacturing, and pipeline and oilfield service work. Pipelines run to CSA Z662, pressure equipment falls under the Technical Safety Authority of Saskatchewan, and licensed uranium sites answer to the CNSC. Corrosion on tanks and vessels and welding on fabricated equipment make UT, MT, PT and VT the everyday methods.
Certifications most in demand in Saskatoon
Atlantis trains to ASNT SNT-TC-1A. Some local employers also ask for CGSB, a separate scheme sat through its own body; Atlantis does not train or examine for it.
Third-party examination centres named for this market
These are run by other organisations, not by Atlantis; Atlantis has no exam centre or practical facility in Saskatoon.
- Atlantis NDT — on-site corporate delivery (ASNT)
Recommended certification pathway
Saskatoon employers split between CAN/CGSB-48.9712, certified through NRCan or CWB Group after Recognized Training Organization courses, and ASNT SNT-TC-1A, where the employer's written practice governs certification. Atlantis courses follow SNT-TC-1A for suppliers on US-code work, cross-border contracts and customers who name ASNT. Licensed nuclear sites set their own scheme. Radiography needs CNSC exposure device operator certification.
Delivery formats
- Online theory through Atlantis eLearning, primarily self-paced, with enrolment open all year and access from the moment you enrol.
- On-site corporate training at your facility using your equipment and specimens.
- Practical training in the Practical NDT simulator and in person at your facility, with the practical examination on real specimens under your written practice.
NDT training across Canada
Nearby markets with their own training pages (training is online, with practicals at your facility):
Frequently Asked Questions
Where can I take ASNT NDT training in Saskatoon?
Atlantis NDT runs ASNT SNT-TC-1A Level I/II/III programmes for candidates in Saskatoon, Canada, delivered as online, primarily self-paced theory with practical training in the Practical NDT simulator and in person at your facility; Atlantis has no training centre in Saskatoon. Saskatoon employers split between CAN/CGSB-48.9712, certified through NRCan or CWB Group after Recognized Training Organization courses, and ASNT SNT-TC-1A, where the employer's written practice governs certification. Atlantis courses follow SNT-TC-1A for suppliers on US-code work, cross-border contracts and customers who name ASNT. Licensed nuclear sites set their own scheme. Radiography needs CNSC exposure device operator certification.
Which certification should an inspector in Saskatoon take first?
Saskatoon employers split between CAN/CGSB-48.9712, certified through NRCan or CWB Group after Recognized Training Organization courses, and ASNT SNT-TC-1A, where the employer's written practice governs certification. Atlantis courses follow SNT-TC-1A for suppliers on US-code work, cross-border contracts and customers who name ASNT. Licensed nuclear sites set their own scheme. Radiography needs CNSC exposure device operator certification.
Does Atlantis run corporate on-site NDT training in Saskatoon?
Yes. On-site courses run for an employer's own team at its facility in or around Saskatoon, with method-specific practical sessions on your own equipment and specimens, so the training maps to the work your crews actually do. Written practice review and Level III oversight can be bundled with the programme.
Related: NDT training programmes · ASNT certification guide · ASNT Level III consulting. Ask about training for Saskatoon.
National programmes behind this Saskatoon, SK page
This page covers NDT training for employers and technicians in Saskatoon, SK. The national programmes live on their own pages: NDT training (every method and level, for candidates worldwide), NDT training online, SNT-TC-1A training and certification, SNT-TC-1A certification programme for NDT companies, ASNT Level III training and ASNT Level III consulting. Hours by method and level are in the training requirements matrix; practise on the Practical NDT simulator.
NDT training in Saskatoon, SK: a practical guide for technicians and employers
Short answer: Saskatoon technicians can complete NDT theory online, mostly self-paced and with ASNT NDT Level III support, then take the hands-on practical at their employer's site. Atlantis NDT has no classroom in Saskatoon. Courses follow ASNT SNT-TC-1A and fit employers whose customers specify ASNT. They do not replace CAN/CGSB-48.9712 certification, which is issued by NRCan or CWB Group. We reply within one business day.
Saskatoon's industrial economy is built on what comes out of the ground. Potash mines and processing sites ring the city, uranium producers run their head offices here and operate mines and mills far to the north, and a large agricultural machinery and manufacturing sector keeps welding shops busy year-round. All of that creates demand for people who can find a crack, measure a wall or interpret a weld image, and for employers who need those people qualified on paper.
The first decision for anyone training here is which scheme the work requires. Mining and uranium employers in Saskatchewan sit in a regulated environment where the licence, the client or the quality programme decides how NDT personnel must be certified. Some specify the Canadian national standard, CAN/CGSB-48.9712. Others, especially suppliers building equipment for US customers or working to ASME and AWS codes, specify ASNT SNT-TC-1A. Our courses are for the second group. Atlantis NDT is not a Recognized Training Organization for NRCan or CWB Group, so anyone aiming at a CAN/CGSB-48.9712 certificate should take method training from one of those organisations.
If SNT-TC-1A fits your work, tell us what you need in Saskatoon: methods, levels and how many people.
How to get NDT certified in Saskatoon under SNT-TC-1A
- Identify the governing document. Look at the contract, the client's quality specification and the code edition. Note whether it names a scheme and which edition.
- Put the written practice on paper. The employer's written practice is the rulebook for hours, experience, examinations and renewal. Companies new to SNT-TC-1A can have one drafted through written practice development.
- Study the theory online. Each method has a course for each level, studied on the Atlantis portal on your own timetable. Compare the hours against your written practice using the training-requirements matrix.
- Build documented experience. Time in the method counts when a supervisor signs for it. Keep a log from the first day.
- Pass the written papers. A general examination on method principles and a specific one on your employer's equipment, procedures and codes.
- Demonstrate the practical. Examine real specimens at the employer's facility while a Level III watches and grades the result.
- Clear the vision check. Near vision and colour discrimination are tested and recorded.
- Be certified by the employer. The company issues the certificate under its written practice.
- Plan renewal. Renewal follows the practice. If you also hold a national certificate, keep both calendars.
People who prefer a credential that stays with them can aim for ASNT central certification, which ASNT examines and issues. Check your hours and eyesight against the published criteria using the SNT-TC-1A eligibility checker before you enrol.
Level 1, Level 2 and Level 3 NDT courses for Saskatoon technicians
The courses below follow the SNT-TC-1A body of knowledge. The last column shows how each method links to the kind of work found around Saskatoon, which is how practical exercises are chosen.
| Method | Course content | Where Saskatoon work uses it |
|---|---|---|
| UT | Sound physics, calibration, thickness measurement, weld examination, reading A-scan and B-scan displays | Corrosion surveys on tanks and vessels at mining and processing sites, weld checks on fabricated equipment |
| PAUT and TOFD | Beam steering, focal laws, encoded scanning, sizing from diffracted signals | Heavy-section welds on vessels and structures, weld checks where code permits advanced UT |
| RT | Radiation sources, exposure geometry, density and sensitivity, image interpretation | Pressure-vessel and piping welds, castings, shop fabrication |
| MT | Magnetisation, particle selection, yokes and coils, demagnetisation | Welds on trailers, implements and structural steel, heavy mobile equipment repair |
| PT | Penetrant types, cleaning, dwell, developer, evaluation | Stainless and aluminium parts, food and fertiliser-handling equipment |
| VT | Visual acuity, illumination, measuring tools, discontinuity recognition | Every fabrication shop; first-line inspection on structures and vessels |
| ET | Impedance-plane analysis, probe frequency, tube testing | Heat-exchanger tubes, surface checks on non-ferrous parts |
Level I is the starting point, Level II is the working qualification for most employers, and Level III is the technical authority who writes procedures and examines others. Learn more at Level 1 training, Level 2 training and the Level III programme.
Ultrasonic testing (UT) training in Saskatoon
Ultrasonic testing is a strong first method in Saskatoon because the mining and processing economy is full of steel that corrodes. Tanks hold brines and process liquors, vessels carry chemicals, and structural steel lives outdoors through hard winters. A technician who can gauge thickness reliably and read weld indications is useful from the first week.
The UT course explains how an ultrasonic beam travels, reflects and weakens, how to set up and check an instrument before use, and why a reading means nothing unless the calibration is right. It also covers the practical traps: scale and pitting that scatter sound, curved surfaces, coatings, and the effect of cold on couplant and equipment. Saskatoon's winters make that last point more than theoretical. Instruments that behave in a heated shop can behave differently at minus twenty on a tank wall.
Further detail is on the UT training page. For a second method, many technicians add MT or PT, because surface-breaking cracks are a common finding in welded equipment and those methods are quick to learn once UT is established.
Where NDT technicians work around Saskatoon
Potash and mineral processing. Mines and mills around the city depend on large vessels, conveyors, pipe networks and storage structures. Inspection contractors and in-house reliability teams examine them for corrosion and fatigue, and new mine construction brings weld examination on steel and pressure equipment.
Uranium. Several major uranium producers are headquartered in Saskatoon and run operations in the north of the province. Those licensed sites answer to the Canadian Nuclear Safety Commission and run their own qualification programmes. Contractors and suppliers to that industry may be asked for particular schemes, so always confirm with the customer before choosing a course. Our SNT-TC-1A training is relevant to supply-chain work that specifies it and is not a route into in-service inspection where the licensee names another scheme.
Manufacturing and agricultural equipment. Seeders, grain handling equipment, trailers and tanks are made in and around the city. Welds on these products are examined by visual, magnetic particle and penetrant methods, with ultrasonic or radiographic work where the product or customer calls for it.
Pipelines and oilfield service. Saskatchewan has an active oil and gas sector, with pipelines to CSA Z662 and provincial or federal oversight depending on the route. Saskatoon-based contractors support that work with weld examination and integrity checks.
Pressure equipment. Boilers and pressure vessels in the province fall under the Technical Safety Authority of Saskatchewan. Check current requirements directly with the authority.
Research and public sector. A university, a research council and agricultural research facilities create occasional demand for specialist non-destructive evaluation, mostly on materials and equipment rather than field welds.
Our NDT salary guide explains the factors that move pay between methods, levels and sectors.
NDT schools and classes near Saskatoon: what to compare
Anyone looking for NDT classes near Saskatoon should compare formats, not just names. A polytechnic or college programme is the best fit for someone entering the trade without a job lined up, because it offers a long, broad introduction. A contractor's in-house course is fast and relevant but tied to that company. An online theory course with a practical at the employer suits people already working, or hired on condition that they qualify.
Put these questions to every provider:
- Does the course lead into the scheme my employer or customer names?
- Who issues the final certificate?
- Are practical examinations performed on real specimens, and who grades them?
- Does the syllabus match published hour recommendations or a written practice?
- Can the training records be used if I move jobs?
Be careful with any provider that says a course certifies you. Under SNT-TC-1A only the employer certifies. The NDT training FAQ covers many of these points, and the training overview lists every method and level.
Online NDT training in Saskatchewan
The online theory course runs on the Atlantis portal. It is mainly self-paced, an ASNT NDT Level III is available for questions, and access begins as soon as you enrol. Because courses run all year, there is no waiting for a start. Technicians who rotate to remote northern sites can download material in advance and study offline when connectivity is poor.
The online format covers theory only. The practical, which is where skill is demonstrated, happens at the employer with real specimens. See online NDT training and the Saskatchewan training overview for more.
Training a crew at your Saskatoon facility
Employers who need a group of technicians qualified together can organise the programme around their own premises. Each person studies theory online. The practical block takes place at your shop, plant or yard with your equipment and representative specimens, and a Level III administers the examinations and reviews the records.
Common triggers include a fabricator winning work for a US customer, a service company adding methods to its scope, and a processing site renewing a team as experienced staff retire. Use the crew training enquiry to describe your situation, or ask about outsourced Level III support if you lack an in-house Level III. For Canada, contact us for fees in your region.
ASNT SNT-TC-1A suits employers whose customers specify ASNT, such as shops shipping to US projects, firms on cross-border work and suppliers into nuclear and aerospace supply chains. It does not satisfy requirements that name CAN/CGSB-48.9712.
Radiography licensing in Saskatchewan
Radiography in Canada is governed federally. The Canadian Nuclear Safety Commission licenses the organisations that hold exposure devices, and operators must be CNSC-certified exposure device operators or work directly under one. Provincial occupational health and safety legislation adds its own radiation requirements.
A radiographic testing course teaches how to produce and interpret images. It does not authorise anyone to handle a source. Atlantis NDT does not provide exposure device operator training, so arrange that separately with your employer.
Practise before your practical exam
Rehearse on the Practical NDT simulator, which runs in a browser and lets you work through set-ups and indications in simulated workplaces. It supports repetition between sessions, but it never stands in for the practical on real specimens. Test your written knowledge with the NDT practice tests.
Frequently asked questions about NDT training in Saskatoon
How do I start an NDT career in Saskatoon?
Begin with a Level I course in a method your target employers use, such as UT or VT, and look for trainee roles in fabrication, mining service or inspection. Your employer then certifies you under its written practice as you gain experience.
Is there an NDT school in Saskatoon?
Atlantis NDT does not operate a school there. Our model is online theory plus a practical at your employer. For a campus programme, look at the provincial college and polytechnic options and check which certification scheme they feed.
Can I do NDT training online in Saskatchewan?
Theory, yes. The practical examination needs real specimens and happens in person at the employer.
Does your course give me CAN/CGSB-48.9712 certification?
No. That certificate comes from NRCan or CWB Group after training from a Recognized Training Organization, and Atlantis NDT is not one. Our courses prepare you for SNT-TC-1A or ASNT central certification.
Which method should I learn first?
Match the method to the local work. UT suits corrosion surveys at mining and processing sites, and VT, MT and PT suit fabrication.
What jobs use NDT in Saskatoon?
Mining and mineral processing, uranium supply chains, agricultural equipment manufacturing, pipeline and oilfield service, and fabrication all employ technicians.
Do I need a licence for radiography?
Yes, to operate an exposure device you need CNSC exposure device operator certification. An NDT course certificate does not replace it.
What happens to my certificate if I change employers?
An SNT-TC-1A certificate belongs to the employer that issued it, so the next employer recertifies you. An ASNT central certificate belongs to you.
How much does training cost?
For Canada, contact us for fees in your region. We reply within one business day, and Register and Buy Now opens the course on the Atlantis portal.
Who teaches the courses?
Anoop Rayavarapu leads the training. He is an ASNT NDT Level III in UT, RT, MT, PT and VT with more than eleven years of international field experience.
Nearby pages: Regina · Edmonton · Winnipeg · Canada overview · United States overview.
Part of NDT training in Saskatchewan, NDT training in Canada and the wider NDT training programme at Atlantis NDT.
Practise between sessions
Free practice tests and downloadable question packs show where you stand, and Practical NDT lets you practise scans on a 3D simulator before the practical examination.
Start NDT training any time of year
Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.
- Monthly starts
- Portal access opens the moment you enrol, at any time of year.
- Level III support
- Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
- Practical arrangements
- Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.