Practical NDT Simulator in Sharjah: Weld, Gas Plant and Port Inspection Practice

Sharjah's inspection work is spread across fabrication bays in the Hamriyah Free Zone, gas assets that trace back to the Sajaa discovery, and ports that face two different seas. A technician here can move from a structural weld one week to a pressure vessel or a quay crane the next. Practical NDT, the online simulator from Atlantis NDT, lets that technician rehearse each kind of job on virtual specimens and assets before touching the real thing. It opens in a web browser, installs on a Windows PC or laptop and keeps working there without a connection, and runs in VR on a standalone headset.

This page sets out what the simulator covers, how it lines up with the work Sharjah employers actually buy, and where its limits sit. If you would like to see it on jobs that look like yours, request a Sharjah demo. We reply within one business day.

What the simulator is, in brief

Practical NDT is a 3D practice environment that looks like a game and behaves like an inspection department. A learner opens a job, reads the work order, picks up a virtual instrument and examines a virtual part. Its content runs to 473 practice jobs backed by 33 lessons, organised both by method family (twelve of them) and by workplace (also twelve), so a fabricator's new hire and a gas plant technician can both find work that resembles their own.

Here are the method families, grouped the way most Sharjah shops think about them:

The 12 workplaces start with an NDT lab and a welding workshop and continue through a storage tank, a heat exchanger, an oil and gas site and a cross-country pipeline. They also include an aircraft hangar, offshore wind, a superyacht, a merchant vessel, a satellite assembly hall and a space propulsion facility. For Sharjah, the welding workshop, the tank, the exchanger and the oil and gas site carry most of the weight.

Hamriyah Free Zone: fabrication bays and oil and gas service yards

The Hamriyah Free Zone Authority was set up in 1995 and now manages about 30 million square metres of industrial land on Sharjah's northern coast. The authority says more than 6,500 companies hold licences there, and it lists oil and gas, industrial manufacturing and the maritime industry among its main sectors. It also describes the zone as having more steel fabricators than anywhere else in the region and as a base for many regional oil and gas companies.

For NDT, that mix means weld inspection in volume. Structural steel, skids, pressure vessels, piping spools and tank components leave Hamriyah yards every week, and most are examined before they ship. A normal week in a fabrication bay might include MT on fillet welds, PT on stainless fittings, angle-beam UT on butt welds and visual checks on every joint. Bigger yards add PAUT or TOFD on thick sections where the code and the client accept ultrasonics in place of radiography.

The waterfront matters as well. The free zone advertises a 14-metre deep port and a 7-metre inner harbour, which lets heavy fabricated modules leave by sea. Load-out dates squeeze inspection windows. A technician who has already rehearsed a coverage plan on a similar weld spends less of that window working out where the probe should go.

The welding workshop in Practical NDT is the closest match to a Hamriyah bay. Learners can run MT yoke jobs on fillet and butt welds, visible and fluorescent PT on machined and welded parts, and angle-beam UT with skip distance and coverage planning. The welding workshop page describes that setting in more depth.

Sajaa gas and the Hamriyah LPG terminal

Sharjah National Oil Corporation dates the emirate's gas story to the Sajaa discovery of 1978. Condensate exports followed in 1982, and the Hamriyah LPG terminal opened in 1984. Gas processing, condensate handling and LPG storage are long-lived assets, and long-lived assets bring recurring inspection: wall-thickness surveys on lines and vessels, checks for corrosion under insulation, weld examination on repairs and modifications, and tube inspection in coolers and exchangers.

That work maps onto three simulator workplaces: the oil and gas site, the heat exchanger and the storage tank. A technician can practise thickness UT on a corroded line, set up IRIS or ET on exchanger tubes, or scan a tank floor with MFL. Each of those jobs runs through the same disciplined sequence a plant job does, including confirming that the part, its material and the method agree before the first reading is taken. The process plant workplace and the heat exchanger workplace explain what is inside.

Gas plant inspection tends to cluster around planned shutdowns. Practice pays off most in the weeks before one: rebuilding calibration habits, re-reading how a given procedure wants indications recorded, and getting comfortable again with a method that has not been used since the last outage.

Ports on two seas: Port Khalid, Hamriyah and Khorfakkan

Sharjah stands out among the emirates because its ports reach both the Arabian Gulf and the Gulf of Oman. Port Khalid and Hamriyah Port serve the Gulf side, while Khorfakkan Port sits on the east coast. Inland, Sajaa Dry Port moves cargo between the seaports and the emirate's factories and warehouses.

Ports create their own inspection load: cranes, spreaders and lifting gear, quay structures, mooring hardware, and ships when they come in for repair. Much of it is MT and VT on welds and load paths, with UT thickness readings on corroded steel. The merchant vessel workplace gives technicians a ship structure to practise on, and drone VT jobs cover the kind of overview survey that is now often flown before anyone climbs. For ship thickness measurement and hull work in the emirate, see maritime inspection in Sharjah.

Technicians who move between Sharjah's two coasts, or across to the terminals at Fujairah, keep the same practice record wherever they log in. The Fujairah Practical NDT page covers the tank and bunkering work on that side of the mountains.

A manufacturing emirate: 21 industrial zones and thousands of factories

Manufacturing makes up roughly 18 percent of Sharjah's economy, with more than 2,800 factories across 21 industrial zones, according to figures from the emirate's foreign investment office reported by Gulf News. Not every factory needs NDT, but many do. Makers of pressure equipment, metal structures, castings, valves, process skids and machinery examine welds and components as part of their quality plans, and many of them work to client specifications that ask for certified personnel.

In a smaller shop the whole NDT function may be one or two people. They seldom get time away from production for a course, and they may go months without seeing a particular defect type. A simulator they can open between jobs, on a laptop in the QC office, fills that gap. The quality manager can assign one specific job, such as PT on a cast valve body or MT on a lifting lug, and then see whether each step of it was recorded.

Which method families matter most in Sharjah

Sharjah workTypical assetsMethod families to practise
Hamriyah fabricationStructural steel, spools, vessels, tank platesVT, MT, PT, angle-beam UT, PAUT, TOFD
Gas and LPGProcess piping, pressure vessels, coolers and exchangersThickness UT, IRIS, ET, PMI, guided-wave UT
StorageTank floors, shells and nozzlesMFL, thickness UT, VT
Ports and ship repairCranes, lifting gear, hull and deck steelMT, drone and direct VT, thickness UT
FactoriesCastings, forgings, machined partsPT, MT, normal-beam UT, RT film interpretation

Each row has matching method pages: PAUT, TOFD, radiography, visual testing and eddy current.

Every job follows the same twelve-step procedure

Whatever the method, each practical walks through one twelve-step procedure. Step one is the work order. Before any equipment comes out, the learner must confirm that specimen, material and method are compatible, a check that catches a mistake seen on real jobs more often than people admit, such as reaching for a magnetic yoke on austenitic stainless steel. Calibration against the reference follows, then the examination, then a judgement on whether the data is good enough to report. It closes by checking the equipment again, writing up the training report and talking the job through with a supervisor or instructor.

Each job is locked to a named revision of its procedure and of its equipment, which lets a supervisor see exactly which document the learner was following. Sharjah shops that move between client specifications will recognise why that matters: the same weld can pass under one document and be rejected under another.

Assistance comes in three levels: full guidance for a newcomer, partial prompts for someone building confidence, and none at all for a technician getting ready for an examination. Credit depends on evidence. If the record does not show that a step happened, the evaluator gives nothing for it, and a skipped calibration check stays skipped however clean the final scan looks. Interpretation, meaning the call on what an indication is and whether it rejects, goes to an instructor for review instead of being scored by software. That keeps the human judgement where certification schemes put it.

Browser, PC or VR: fitting practice around shop shifts

Most fabrication and plant staff in Sharjah work long shifts, so practice has to fit into odd hours. The simulator runs in three ways:

Lessons also open on a phone for revision on the go. Learners reach the simulator from the Atlantis client portal with one sign-in, and their results sit next to their other training records in the Atlantis LMS and ERP, so a training coordinator does not have to chase separate spreadsheets. The eLearning app page shows how those records are kept.

How certification works for Sharjah employers

In the UAE the certification scheme is usually set by the client. Some contracts ask for personnel certified by their employer under a written practice based on ASNT SNT-TC-1A. Others want ISO 9712 certificates issued through a certification body, and operators can layer their own requirements on top of either. A Sharjah contractor serving several clients may need to hold all three at once.

Practical NDT sits underneath all of them. Practice in the simulator builds skill for whichever scheme the employer works to; it does not belong to any one of them. Atlantis's own courses are built on SNT-TC-1A, and Atlantis does not offer ISO 9712 training or certification. Under SNT-TC-1A it is the employer that certifies, once a technician has the required training, experience and examination results, and neither a course nor a piece of software can stand in for that decision. The SNT-TC-1A eligibility checker explains the training and experience each level needs, and the NDT training page for Sharjah covers course options for the emirate.

For the wider picture across the Gulf, see NDT training in the Middle East and NDT training in the UAE.

Limits a Sharjah buyer should know

Treat the simulator as training and nothing more. Practical NDT is not a validated engineering tool. Its results cannot qualify a procedure, size a flaw for an engineering decision, or accept a part. The virtual specimens look and behave realistically, yet they are not the specimens an employer puts in front of a candidate at a practical examination.

Simulator time does not replace experience hours either, and it does not stand in for the employer's practical examination required by the written practice. Hours spent in the simulator are practice hours. They make a technician faster and more careful when the real hours and the real examination come, and they help a supervisor spot weak habits early, but they do not count as field experience.

Finally, the simulator carries no operator or client approval in the UAE or anywhere else. Where a client requires a specific approval for its inspectors, that requirement still has to be met in the client's own way.

Getting started in Sharjah

A sensible first step is the free ultrasonic A-scan demo, which runs in any browser and gives a feel for how the instrument screens behave. Technicians preparing for written examinations can add the NDT practice tests. Supervisors planning a crew's development can match simulator jobs to the Level 1 and Level 2 training paths.

Employers who also work in Dubai or Abu Dhabi can read the Dubai and Abu Dhabi pages, or the national overview on the Practical NDT UAE page. The Practical NDT hub lists every method and workplace.

When you are ready, book a demo for your Sharjah team and tell us which methods and assets you work on most.

Frequently asked questions

Can a Hamriyah fabrication shop use Practical NDT to onboard new weld inspectors?

Yes. New hires can work through VT, MT, PT and angle-beam UT jobs in the welding workshop before they examine production welds. The shop decides which jobs to assign and reviews the recorded steps; the simulator does not decide when someone is ready for production work.

Will it work in a yard office with weak internet?

The PC and laptop version is a download that keeps working offline after installation. Results are stored and can be brought back into the training records when the device is connected again.

Do simulator hours count toward certification experience?

No. They are practice. The experience hours and the practical examination required by the employer's written practice, or by the client's chosen scheme, still have to be completed on real work and real specimens.

Which certification schemes does it support in Sharjah?

It is scheme-neutral practice. Technicians working toward employer certification under SNT-TC-1A, an ISO 9712 certificate from a certification body, or an operator's own requirement all practise the same physical skills. Atlantis's own training is SNT-TC-1A-based.

Can a quality manager see what each technician has done?

Yes. Each job records which steps were evidenced, and the training report sits with the learner's other records in the Atlantis LMS. Interpretation calls are reviewed by an instructor rather than marked automatically.

Does it cover gas plant and tank work as well as welding?

Yes. Thickness UT, IRIS, ET, PMI, guided-wave UT and MFL tank floor jobs run in the oil and gas site, heat exchanger and storage tank workplaces.

Does Atlantis NDT have a training centre in Sharjah?

No. Atlantis NDT has offices in Houston and Hyderabad. In Sharjah it works online and by sending people to the client's site when a job calls for it.

Every NDT method in one simulator

  • All methods, one simulator: 12 method families: UT, PAUT, TOFD, RT, MT, PT, VT, ET, IRIS, MFL, guided-wave UT and PMI, across 473 jobs and 12 workplaces.
  • Follows the SOP: Every job runs the same twelve-step procedure, from the work order and calibration to the post-check, the training report and the debrief, so trainees build one disciplined habit on every method.
  • Browser, PC or VR: Runs in a browser, on a PC or laptop (offline once downloaded) and in VR on a standalone headset, and connects to the Atlantis LMS and ERP with one sign-in.

Each Practical NDT method and workplace has its own national page: what you practise, what the simulator computes and what it cannot teach. Practical NDT is delivered online, so the same pages apply wherever your team works.

Methods: UT practical simulator · Phased array UT simulator · TOFD simulator · Radiography simulator · Magnetic particle simulator · Penetrant testing simulator · Visual testing simulator · Eddy current simulator

Workplaces: NDT lab · Welding workshop · Process plant · Storage tank · Heat exchanger · Aviation

Practise now: Free ultrasonic A-scan simulator

Speak to an ASNT NDT Level III

Discuss your inspection requirements with Atlantis NDT. Include the asset, method, location and documents you need reviewed.