Practical NDT Simulator for Fujairah: Tank Terminal, Pipeline and Bunkering Inspection Practice
Fujairah is a tank inspector's town. On the UAE's east coast, facing the Gulf of Oman, its oil industry zone holds rows of storage terminals, a refinery and processing plants, all tied to a deep-water tanker port and a crude pipeline from Abu Dhabi's inland fields. Add a bunkering trade the port ranks among the three biggest in the world, and the inspection work here is about steel that holds, moves and transfers hydrocarbons.
Practical NDT, made by Atlantis NDT, is a 3D inspection simulator. Technicians open a virtual work order, set up a virtual instrument and examine virtual tanks, pipes, welds and components. The methods include ultrasonic testing (UT) and its phased-array (PAUT) and TOFD forms, radiography (RT), magnetic particle (MT), penetrant (PT), visual (VT) and eddy current (ET), with IRIS tube inspection, magnetic flux leakage (MFL) for tank floors, guided-wave long-range UT and PMI alongside. It runs in a browser, offline on a Windows PC or laptop once downloaded, or in a standalone VR headset. To see the storage tank jobs for yourself, request a Fujairah demo; we reply within one business day.
FOIZ and the terminal cluster
The Port of Fujairah says the Fujairah Oil Industry Zone (FOIZ) hosts liquid bulk storage terminals, a refinery and oil processing plants. Fujairah Oil Tanker Terminals (FOTT) handles the port's liquid bulk cargo and serves all of them. According to the port, FOTT offers nine main berths, or fourteen wing berths, for ships up to 200,000 deadweight tonnes, with room for more.
Two Matrix Manifold systems link the storage terminals to any FOTT berth. They also allow product to move straight from one terminal to another without chartering a ship, and the port notes the pipelines are piggable. A deep-water VLCC jetty at the eastern end of the breakwater has been fully operational since 2016 and takes tankers up to 330,000 deadweight tonnes through two 40-inch lines.
For anyone working in NDT, that list translates into three big populations of equipment: storage tanks, terminal and jetty pipework, and the marine fleet that serves them. Each has a matching place in the simulator.
Tank floors: the job Fujairah technicians do most
When a storage tank comes out of service for internal inspection, the floor is where the surprises hide. Corrosion from the product side and from the soil side can thin plates without any sign from above. The standard approach is an MFL floor scan to find areas of metal loss, followed by UT to prove up and size what the scanner flagged, plus visual examination of welds, sumps and the critical zone near the shell.
The storage tank workplace in Practical NDT puts learners inside that job. They plan scan coverage across the floor, deal with the areas a floor scanner cannot reach near the shell and around obstructions, set thresholds, and follow up indications with thickness UT using the ultrasonic testing simulator. For a contractor that mobilises crews to terminal shutdowns, rehearsing this sequence before entering a gas-freed tank saves real time inside it.
Shells, nozzles, roofs and annular plates
A tank inspection is more than its floor. Shell courses need thickness readings, especially near the bottom where corrosion concentrates. Nozzle welds and reinforcing pads need surface examination, usually MT on carbon steel. Floating roofs have pontoons, seals and drainage that corrode. Annular plates, which carry the shell load, deserve particular attention because their condition drives major repair decisions.
The simulator lets learners practise each of those tasks: MT on nozzle and shell-to-floor welds, thickness UT on shell courses, and visual testing by direct view, borescope or drone. Where repairs involve new welds, angle-beam UT and PAUT jobs build volumetric skills, while the radiography simulator covers interpretation of film and digital images taken by licensed radiography crews.
Tank inspection programmes in the region are commonly built around API 653 for in-service tanks. The simulator teaches the NDT tasks inside such a programme; it does not train anyone for an API inspector certificate, and Atlantis does not offer API 653 training.
Manifolds, jetties and berth pipework
Pipework at a terminal like Fujairah's runs long distances above ground, through pipe racks and across jetties, often under insulation and always in salt air. That combination drives three kinds of inspection: wall-thickness surveys at known corrosion points, screening of long runs for metal loss, and alloy confirmation after repairs.
Guided-wave long-range UT is the screening tool for those long runs, especially where pipe passes through supports or under roads. Thickness UT and PAUT corrosion mapping then quantify what screening finds. PMI by XRF confirms that replacement spools and fittings are the right grade. Those jobs sit in the process plant and oil and gas site workplaces, and the TOFD simulator covers weld examination on thicker new construction.
The crude line from Habshan
The port describes ADNOC's 360-kilometre crude oil pipeline as carrying Murban crude from the Habshan fields to Fujairah, pumping since 2012 with a capacity of 1.8 million barrels a day. The port also reports that ADNOC has been building a very large underground crude storage facility in Fujairah, with a planned link to the port.
Cross-country pipelines bring their own NDT: girth weld examination during construction and repair, dig verification after in-line inspection, and above-ground checks at stations and valve sites. The simulator's cross-country pipeline workplace gives practice on girth welds and corrosion assessment at excavated sites. In-line inspection itself, the pigging runs, is a specialist service outside the simulator's scope.
Bunkering and the anchorage
Bunker fuel in Fujairah is stored mainly in FOIZ terminals, loaded at FOTT berths and taken by dedicated barges to ships waiting in the Fujairah Anchorage Area. The port lists bunker barge berths dedicated to marine gasoil and very low sulphur fuel oil, set up when the IMO 2020 sulphur limit came in.
A busy barge fleet means hulls, tanks and deck steel that need regular thickness gauging and weld examination. The simulator's merchant vessel workplace covers hull and deck thickness readings and drone-assisted visual surveys. For thickness measurement and hull work in the emirate itself, see maritime inspection in Fujairah.
Rehearsing an MFL floor job through the twelve-step procedure
All Practical NDT jobs share a twelve-step procedure. Walking through a Fujairah-style floor scan shows why that is useful:
- Before scanning: the learner reads the work order, confirms that the tank floor's material, thickness and coating suit the MFL method and the scanner named, and checks which procedure revision applies. Equipment revisions are pinned to the job.
- Setting up: the scanner is checked against a reference plate with known metal-loss features, and the reporting threshold is set as the procedure demands.
- Scanning and reviewing: the floor is covered lane by lane, then the learner reviews whether coverage and signal quality are good enough to report. Areas the scanner cannot reach are flagged for other methods.
- Closing out: indications are followed up, the equipment is re-checked, a training report is produced and the job is debriefed.
An MT job on a nozzle weld or a guided-wave screen on a manifold uses the same backbone, so a supervisor reads every record the same way. Learners can attempt jobs with close guidance, with some guidance or alone. Steps earn credit only when the record shows they were done. Deciding what an indication represents is left to an instructor, not to an algorithm.
The whole library runs to 473 jobs and 33 lessons over twelve method families and twelve workplaces, from the lab and welding bay to heat exchangers, offshore wind and ships. The heat exchanger workplace, with IRIS and eddy current tube jobs, suits technicians who also support the refinery and processing plants in FOIZ.
Heat, shutdown windows and remote practice
Fujairah summers are hot and humid, and much terminal inspection happens outdoors or inside tanks where heat builds quickly. Time inside a gas-freed tank is controlled by permits, ventilation and rest breaks. Every minute spent working out a scan pattern or a calibration step on the day is a minute not spent inspecting.
Many technicians on Fujairah terminal jobs also arrive on short assignments from other countries or from the Gulf coast. A shared practice record lets a lead technician check before mobilisation that each newcomer has completed the floor-scan and nozzle jobs without assistance, instead of discovering gaps on the first shift inside a tank.
That is where rehearsal at a desk, in the air conditioning, pays off. The simulator runs three ways:
- In a browser for quick sessions at the terminal office or at home.
- On a PC or laptop as a download that keeps working offline, handy in contractor accommodation and at sites with locked-down networks.
- In VR, on any standalone headset that supports WebXR, using either hands or controllers, so a learner can move around a nozzle or along a floor lane and build a sense of coverage.
Lessons are readable on a phone too. Access is through the Atlantis client portal with one login, and each attempt lands in the Atlantis LMS and ERP next to certificates, course records and other training evidence. See the eLearning app for how records are organised.
Certification for Fujairah terminal and marine employers
Terminal operators and their contractors in Fujairah work for owners and charterers from many countries, and the personnel scheme follows the client. One client may want employer certification under a written practice built on ASNT SNT-TC-1A. Another may require ISO 9712 certificates from a certification body, and operators can add requirements of their own. Practical NDT is a practice tool for all of them, not part of any single scheme.
Atlantis bases its courses on SNT-TC-1A and does not train or certify anyone to ISO 9712. Under SNT-TC-1A, it is the employer who certifies, after training, experience and examination. Course routes for the emirate are on the NDT training page for Fujairah, and the SNT-TC-1A eligibility page sets out the requirements level by level.
The limits, plainly
Practical NDT is not a validated engineering tool. A virtual floor scan says nothing about a real tank, and nothing done in the simulator can be used to return a tank to service, size a defect for a repair decision or accept a weld. Practice does not replace experience hours on real work, and it does not replace the employer's practical examination. The simulator holds no approval from any terminal operator, port authority or oil company.
Getting started
The free browser A-scan simulator is a quick way to see how instrument screens behave. For written examination preparation there are NDT practice tests. Teams that also work on the Gulf coast can read the Sharjah, Dubai and Abu Dhabi pages, the UAE overview and the Middle East training page. Everything else is on the Practical NDT hub.
When you want to see tank and terminal jobs running, book a Fujairah demo.
Frequently asked questions
Does the simulator include MFL tank floor scanning?
Yes. The storage tank workplace includes MFL floor scanning with UT follow-up, plus shell thickness readings and visual and MT work on nozzles and welds.
Can a terminal contractor use it before a tank shutdown?
Yes. Crews can rehearse scan planning, calibration and follow-up on a laptop in the weeks before entry, so time inside the tank goes into inspection.
Does it train people for API 653 certification?
No. It covers the NDT tasks that sit inside a tank inspection programme. Atlantis does not offer API 653 training.
Will it run where the site network blocks outside connections?
The downloaded PC version runs offline after installation and keeps its results until the device can connect to the training records.
Is practice in the simulator counted as experience?
No. It is practice only. Field experience hours and the employer's practical examination are still needed under the written practice or the client's chosen scheme.
Which certification schemes does it suit?
All the common ones, because it trains practical skill rather than a scheme's paperwork. Atlantis's own training is SNT-TC-1A-based; it does not provide ISO 9712 training.
Is there an Atlantis NDT office in Fujairah?
No. Atlantis NDT is based in Houston and Hyderabad and serves Fujairah clients online, sending people to site when a job requires it.
Every NDT method in one simulator
- All methods, one simulator: 12 method families: UT, PAUT, TOFD, RT, MT, PT, VT, ET, IRIS, MFL, guided-wave UT and PMI, across 473 jobs and 12 workplaces.
- Follows the SOP: Every job runs the same twelve-step procedure, from the work order and calibration to the post-check, the training report and the debrief, so trainees build one disciplined habit on every method.
- Browser, PC or VR: Runs in a browser, on a PC or laptop (offline once downloaded) and in VR on a standalone headset, and connects to the Atlantis LMS and ERP with one sign-in.
Each Practical NDT method and workplace has its own national page: what you practise, what the simulator computes and what it cannot teach. Practical NDT is delivered online, so the same pages apply wherever your team works.
Methods: UT practical simulator · Phased array UT simulator · TOFD simulator · Radiography simulator · Magnetic particle simulator · Penetrant testing simulator · Visual testing simulator · Eddy current simulator
Workplaces: NDT lab · Welding workshop · Process plant · Storage tank · Heat exchanger · Aviation
Practise now: Free ultrasonic A-scan simulator
Speak to an ASNT NDT Level III
Discuss your inspection requirements with Atlantis NDT. Include the asset, method, location and documents you need reviewed.