NDT Inspection Management ERP in Winnipeg — Certification, Calibration and Work Orders in One System
Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in Winnipeg, Canada. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one fully customized platform with 30+ business apps behind it.
Modules inspection companies actually switch for
- Certification tracking — SNT-TC-1A / ISO 9712 / certification currency with computed status, 90-day expiry warning tasks, email alerts and blocked double-booking.
- Calibration management — instrument, block and probe calibration intervals with ISO 17025 traceability chains.
- Work order management — multi-crew, multi-site dispatch with mobile offline field capture.
- Document control — procedures, written practices and technique sheets under ISO 9001 revision control.
- Asset management — NDT equipment by serial number with issue, return, calibration and maintenance history.
Integrations
Atlantis ERP has an open REST API, so it connects to SAP, Maximo, NetSuite or any other system that accepts API connections; each integration is scoped with you during implementation.
Frequently Asked Questions
Does Atlantis NDT ERP suit an inspection company based in Winnipeg?
Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with expiry warnings and blocked double-booking, equipment calibration due-date control, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for Canada are configured during onboarding rather than sold as an add-on module.
How long does implementation take for a mid-size Winnipeg inspection contractor?
A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.
Can it replace the spreadsheets we use for technician certification and equipment calibration?
That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and each certificate carries a computed status, with 90-day expiry warning tasks, email alerts, timesheet warnings and blocked double-booking. Equipment calibration is tracked the same way — due dates on every flaw detector, thickness gauge and reference block raise warnings before they lapse. That removes the two failure modes that most often cost inspection firms a client audit.
See it on your own workflow
Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.
Related: Atlantis NDT ERP · NDT inspection software · inspection management software · Digital Twin in Winnipeg · NDT reporting software.
The Winnipeg NDT services market, from the provider's side
Winnipeg is a Prairie manufacturing and maintenance hub: StandardAero's largest operation, Boeing's Canadian composites centre and Magellan Aerospace on the aerospace side, New Flyer's bus production, CN's Symington Yard on the rail network, and Manitoba Hydro's northern hydro fleet feeding the city over direct-current lines.
Inspection demand spans engine MRO and composite-structure examination under aerospace customer requirements, bus and rail work on production deadlines, and hydro and converter-station scope reached from the city. For the companies doing this work, the operational load concentrates around the StandardAero, Boeing and Magellan plants, the New Flyer facilities, Symington Yard, and the Manitoba Hydro system from the Nelson River stations to its Winnipeg terminals — and the back office that keeps crews certified, equipment calibrated and reports moving is what decides which providers grow.
Diversified industrial inspection: many clients, one system of record
An inspection company serving a mixed industrial base — plants, mills, municipal infrastructure, the occasional wind farm or data-centre build — carries a wider operational surface than a single-industry shop: more report formats, more client-specific requirements, more codes in play on any given week. The overhead lands on the office: who tracks which client wants which deliverable, which technician holds which combination of certs, which instrument is due for calibration. Business management software for inspection companies exists to make that surface manageable — certification tracking, equipment and calibration registers, work orders, quoting and invoicing in one place instead of five spreadsheets that disagree.
Diversity is also the commercial hedge: when one sector slows, the others carry the year. The companies that exploit that hedge are the ones whose systems let them say yes quickly — quote, mobilise, report — in sectors they touch only occasionally.
What an ERP built for NDT companies covers in Winnipeg
A diversified book like Winnipeg's needs one system that flexes across codes and clients — Atlantis packages NDT inspection software and business management without forcing one industry's workflow on another:
Certification and personnel tracking. Every technician's methods, levels, expiry dates, eye-exam currency and Written Practice records under SNT-TC-1A or CP-189 — with the audit view a client's quality department expects, ready before they ask.
Equipment and calibration management. The instrument register with calibration due dates, certificates attached, and traceability that satisfies ISO 17025-minded reviewers — so nothing leaves the shop out of date.
Work order and crew scheduling. Who is qualified, who is available, what the job needs — matched in one view, from a single technician call-out to a full turnaround mobilisation.
NDT reporting. Findings captured once — in the field or the shop, offline if needed — flowing into code-referenced report templates, so the deliverable ships while the competitor is still retyping field sheets. This is the inspection management software layer clients actually see.
Quoting, invoicing and job costing. Hours, equipment and consumables tied to each work order as they happen, so every job shows its true margin and the next bid learns from the last one.
Cloud-based, mobile in the field, and fully customizable to how your operation already works. See the NDT inspection software platform · the full business management suite · talk to us about Winnipeg.
Frequently asked questions
Does Atlantis understand how Winnipeg inspection companies operate?
The platform is built by ASNT Level III practitioners around the workflows above — certification tracking, calibration, field data capture, code-referenced reporting — rather than adapted from generic field-service software. Regional specifics like the client mix around the StandardAero, Boeing and Magellan plants, the New Flyer facilities, Symington Yard, and the Manitoba Hydro system from the Nelson River stations to its Winnipeg terminals shape configuration, not custom development.
Can we keep our existing report formats and client requirements?
Yes — report templates, client-specific deliverables and your Written Practice structure are configuration. The system adapts to how you already serve your clients; switching software should never mean renegotiating what your clients receive.
Related: why inspection companies replace spreadsheets · NDT ERP vs generic ERP · compared with NetSuite.
Winnipeg: engines, composites, buses and a hydro system that starts far to the north
Winnipeg's aerospace base is larger than its profile suggests. StandardAero, which calls itself the world's largest independent maintenance, repair and overhaul firm, runs its largest operation here, including engine and helicopter work, and operates GE's engine testing and research centre, the primary facility for icing and cold-weather testing. Boeing Canada Winnipeg is described as the largest composites manufacturing centre in Canada, producing parts such as a one-piece acoustic inner barrel for an engine nacelle inlet, and Magellan Aerospace builds horizontal tails for a global fighter programme and integrates satellites. Work for customers like these comes with customer-specified procedures, personnel-qualification expectations and the right to audit every inspection supplier against them.
The heavy-manufacturing and infrastructure side is just as distinct. NFI's New Flyer has opened a Winnipeg facility that completes heavy-duty transit buses, battery-electric models included, so Canadian customers can have buses built from start to finish in the country. CN's Symington Yard in St. Boniface is one of the largest rail yards in the world. And Manitoba Hydro generates nearly all of its electricity at hydro stations, the largest of them on the Nelson River far to the north, sending power south on direct-current lines to terminals at the Winnipeg end, with gas turbines at Brandon held for peaks, system security and drought.
For a Winnipeg-based inspection company, the city is both a market and a launch point. Composite ultrasonic examination, engine-component inspection and audit-heavy aerospace reporting sit beside bus and rail work with production deadlines, and hydro-station work that means sending crews a long way north with every credential and instrument already verified. Keeping aerospace customer approvals clearly separate from general industrial certifications, and knowing which calibrated instruments are at a northern station and which are back in the shop, is what stops a diverse book from turning into missed audits and idle crews waiting on paperwork that should have travelled with them.
Regulation and certification for inspection work in Winnipeg
In Manitoba, boiler and pressure vessel safety is the responsibility of Inspection and Technical Services Manitoba, part of the Department of Labour and Immigration, which administers The Steam and Pressure Plants Act and The Power Engineers Act and enforces them through design registration, inspections, examinations and licensing. The same branch handles elevating devices, gas and electrical inspection, so an industrial client in the city deals with one provincial office across several equipment classes. Aerospace work runs on a different axis: there the governing requirements belong to the customer — the engine maker, airframer or programme prime — whose procedures, qualification expectations and audit rights flow down to every inspection supplier.
A Winnipeg firm can therefore be asked for quite different personnel evidence from one client to the next. Canada's federal route, NRCan's certification body working to CAN/CGSB-48.9712, is one that industrial and infrastructure specifications can name; aerospace customers typically set their own personnel-qualification terms in supplier specifications; employer-based SNT-TC-1A programmes appear where a client's engineering standards call for them; and any radiography needs CNSC exposure device operator certification. The platform organises each technician's credentials by scheme — national certificates, employer written-practice levels, customer approvals, operator certification and expiry dates — so an aerospace audit and a hydro-station prequalification can both be answered from the same register. It stores what a scheme requires; it does not grant certification.
Part of NDT ERP software in Manitoba and the wider NDT ERP software platform from Atlantis NDT.
Problems inspection companies bring to us
Problem-by-problem guides showing how inspection companies remove them with Atlantis NDT.