Inspection Management Software for Marietta, Ohio
Five plants strung along Ohio Route 7 in Washington County are Marietta's manufacturing base, and three of them descend from a single Union Carbide site. Eramet Marietta melts manganese ferroalloys for North American steelmakers in electric arc furnaces running near 3,000 degrees F, with about 180 employees. Kraton Polymers, opened in 1961 as a Shell Chemical plant, makes styrenic block copolymers and polyisoprene latex with roughly 400 direct staff and up to 600 including contractors. Solvay Specialty Polymers, bought from BP Amoco in 2001, makes sulfone polymers for medical and dental instruments and water-filtration membranes with 310 people. Americas Styrenics runs polystyrene, and Orion Engineered Carbons has made carbon black here since 1968.
Five plants strung along Ohio Route 7 in Washington County are Marietta's manufacturing base, and three of them descend from a single Union Carbide site. An NDT ERP serving this market has to carry the evidence those operators audit against — OSHA 1910.119 PSM, ASME Section VIII Div. 1, ASME B31.3, API 510 — with technician certification, equipment calibration and inspection records tied to the job that used them.
Eramet Marietta melts manganese ferroalloys for North American steelmakers in electric arc furnaces running near 3,000 degrees F, with about 180 employees. Kraton Polymers, opened in 1961 as a Shell Chemical plant, makes styrenic block copolymers and polyisoprene latex with roughly 400 direct staff and up to 600 including contractors. Solvay Specialty Polymers, bought from BP Amoco in 2001, makes sulfone polymers for medical and dental instruments and water-filtration membranes with 310 people. Americas Styrenics runs polystyrene, and Orion Engineered Carbons has made carbon black here since 1968. Operators including Eramet Marietta, Kraton Polymers Marietta, Solvay Specialty Polymers Marietta set the pre-qualification bar their contractors inherit. The system of record for that evidence is the ERP, not a spreadsheet a technician maintains between jobs.
Source: Per-city industrial and compliance research file; ASNT SNT-TC-1A employer certification framework
| Factor | What applies | Why it matters |
|---|---|---|
| Sectors served | Chemicals, Manufacturing, Maritime | Sets which methods, report formats and codes the system must handle |
| Codes audited against | OSHA 1910.119 PSM, ASME Section VIII Div. 1, ASME B31.3, API 510, NBIC NB-23, ASNT SNT-TC-1A | Each demands retrievable evidence, not a claim of compliance |
| What must be retrievable on demand | Technician certification currency · equipment calibration status · the report against the asset that generated it | These three are what an auditor asks for first |
| Deployment | Cloud or on-premise · configured to the codes above · offline field capture | Field crews lose connectivity; the record cannot depend on it |
What must an NDT ERP track for inspection firms in Marietta, Ohio?
Evidence against OSHA 1910.119 PSM, ASME Section VIII Div. 1, ASME B31.3, API 510, NBIC NB-23. That means each technician's certification currency by method and level, each instrument's calibration status on the day it was used, and every inspection report bound to the asset and the job that produced it. An auditor asks for those three before anything else.
Can an inspection company in Marietta, Ohio run this alongside its existing accounting?
Yes. The ERP owns operations — jobs, technicians, equipment, reports — and pushes finished invoices to the accounting system, which keeps the chart of accounts, tax and reconciliation. For US firms that usually means QuickBooks; the split is documented in the QuickBooks integration guide rather than forcing a migration nobody asked for.
Does it work offline for field crews in Marietta, Ohio?
Yes. Field capture runs offline and syncs when the device reconnects, because turnaround decks, tank interiors and remote sites have no usable signal and a record that depends on connectivity is a record that gets rewritten from memory hours later. Offline capture is the difference between a contemporaneous record and a reconstruction.
How long does implementation take for a firm in Marietta, Ohio?
The configuration follows the codes and workflows above rather than a fixed template, so the timeline is set by how much existing data has to be migrated and cleaned — certification records and calibration history are the two that consume the time. Firms usually run the first job cycle in parallel before cutting over.
What happens to inspection records if a technician leaves?
They stay with the asset and the job, which is the point. Employer-based certification ends when the holder leaves, but the reports they signed remain part of the asset's inspection history and are still auditable. A system that stores records per technician rather than per asset loses that history on every departure.
Related: the NDT ERP overview, personnel certification tracking, equipment calibration tracking, QuickBooks integration and the RFP requirements checklist. Firms preparing for an audit should also read the NDT programme gap assessment.
Speak to an ASNT NDT Level III
Atlantis NDT provides ASNT Level III consulting, NDT training to SNT-TC-1A and ISO 9712, inspection management software and independent report validation. Request a free consultation and we will return a tailored quote — affordable, accessible and fully customizable to your programme.