NDT Training and Certification in Hobbs, NM: Online and Onsite ASNT Courses
Self-paced online NDT training to ASNT SNT-TC-1A, open to candidates worldwide. Start any time.
Local price for your country, pay with your local card, and course access opens automatically.
Atlantis NDT delivers ASNT SNT-TC-1A NDT training for employers and technicians in Hobbs: Level I, Level II and Level III programmes across ultrasonic, radiographic, magnetic particle, penetrant, eddy current and visual testing. Courses are authored and supervised by ASNT NDT Level III professionals.
Two training routes for Hobbs, NM
I'm an individual technician
You want Level I or Level II in one method, or you are preparing for ASNT Level III. Theory is online and primarily self-paced, with access from the moment you enrol; your employer (or the employer you are joining) certifies you under its written practice, and the practical examination is administered by an ASNT Level III on real specimens. Send a course enquiry or read NDT training online first.
I'm training a company team
You need a crew trained, examined and certified to your SNT-TC-1A written practice, onsite at your facility or blended with online theory, with Level III oversight and an audit-ready file. See the SNT-TC-1A certification programme for NDT companies or request a company team training quote. We reply within one business day.
The Hobbs inspection market
Hobbs is the centre of Lea County and the New Mexico side of the Permian Basin. Oil and gas producers, gathering and processing plants, pipelines and oilfield service companies dominate, with potash mining and processing to the west and the Urenco enrichment plant near Eunice adding nuclear-fuel-cycle work. The Artesia refinery is within reach, and the Waste Isolation Pilot Plant is near Carlsbad. Work runs to ASME B31 and API codes and operator specifications, and demand follows the pace of drilling.
Certifications most in demand in Hobbs
Atlantis trains to ASNT SNT-TC-1A. Some local employers also ask for ISO 9712, a separate scheme sat through its own body; Atlantis does not train or examine for it.
Third-party examination centres named for this market
These are run by other organisations, not by Atlantis; Atlantis has no exam centre or practical facility in Hobbs.
- Atlantis NDT — on-site corporate delivery (ASNT)
Recommended certification pathway
Hobbs employers normally certify technicians under a written practice based on ASNT SNT-TC-1A, with the employer setting hours, examining and signing the certification. Operators and plant owners add their own contractor qualification rules, and nuclear facilities impose additional quality and access requirements. ASNT central certification is an alternative for technicians who change employers.
Delivery formats
- Online theory through Atlantis eLearning, primarily self-paced, with enrolment open all year and access from the moment you enrol.
- On-site corporate training at your facility using your equipment and specimens.
- Practical training in the Practical NDT simulator and in person at your facility, with the practical examination on real specimens under your written practice.
NDT training across USA
Nearby markets with their own training pages (training is online, with practicals at your facility):
Frequently Asked Questions
Where can I take ASNT NDT training in Hobbs?
Atlantis NDT runs ASNT SNT-TC-1A Level I/II/III programmes for candidates in Hobbs, USA, delivered as online, primarily self-paced theory with practical training in the Practical NDT simulator and in person at your facility; Atlantis has no training centre in Hobbs. Hobbs employers normally certify technicians under a written practice based on ASNT SNT-TC-1A, with the employer setting hours, examining and signing the certification. Operators and plant owners add their own contractor qualification rules, and nuclear facilities impose additional quality and access requirements. ASNT central certification is an alternative for technicians who change employers.
Which certification should an inspector in Hobbs take first?
Hobbs employers normally certify technicians under a written practice based on ASNT SNT-TC-1A, with the employer setting hours, examining and signing the certification. Operators and plant owners add their own contractor qualification rules, and nuclear facilities impose additional quality and access requirements. ASNT central certification is an alternative for technicians who change employers.
Does Atlantis run corporate on-site NDT training in Hobbs?
Yes. On-site courses run for an employer's own team at its facility in or around Hobbs, with method-specific practical sessions on your own equipment and specimens, so the training maps to the work your crews actually do. Written practice review and Level III oversight can be bundled with the programme.
Related: NDT training programmes · ASNT certification guide · ASNT Level III consulting. Ask about training for Hobbs.
National programmes behind this Hobbs, NM page
This page covers NDT training for employers and technicians in Hobbs, NM. The national programmes live on their own pages: NDT training (every method and level, for candidates worldwide), NDT training online, SNT-TC-1A training and certification, SNT-TC-1A certification programme for NDT companies, ASNT Level III training and ASNT Level III consulting. Hours by method and level are in the training requirements matrix; practise on the Practical NDT simulator.
NDT training in Hobbs, NM: how it works for Hobbs employers and technicians
Short answer: NDT training for Hobbs technicians and employers is self-paced online theory with an ASNT NDT Level III answering questions, followed by hands-on practice in person at the employer's own shop or field site. Atlantis NDT has no classroom in Hobbs. The courses follow ASNT SNT-TC-1A, and your employer certifies you. We reply within one business day.
Hobbs sits on the New Mexico edge of the Permian Basin, and the local economy rises and falls with oil and gas activity. Wells, gathering lines, tank batteries, compressor stations and processing plants fill Lea County and the neighbouring counties, and each needs weld inspection when it is built and thickness checks as it ages.
Eastern New Mexico also has industries that are less obvious. Potash mining and processing, uranium enrichment and underground waste disposal all operate within a short drive, and all depend on documented inspection. A technician with a solid base in visual, magnetic particle and ultrasonic work can find openings across several of them.
Request a Hobbs training quote, and tell us the methods, levels and head-count you have in mind. In Hobbs, anyone planning ahead can also read the NDT training FAQ, the Atlantis training overview and the USA training page.
How to get NDT certified in Hobbs: the SNT-TC-1A path step by step
In Hobbs, certification in New Mexico follows the same pattern as elsewhere in the United States. In Hobbs, under ASNT SNT-TC-1A, the employer certifies its own technicians, and the standard is a set of recommended practices that each employer turns into a written practice of its own. Here is the sequence in order.
- Find or have an employer with a written practice. A technician in Hobbs is certified by the company that employs them, so the first step is a sponsor whose written practice covers the method and level you want. In Hobbs, the practice sets the hours, the examinations and the recertification interval.
- In Hobbs, complete the formal training. Take the classroom hours the written practice requires. The training-requirements matrix shows the SNT-TC-1A recommended hours for each method, and your Hobbs employer may set higher figures.
- Log supervised experience. Document the hours a Hobbs technician spends performing the method under a certified Level II or III. Experience is usually the slowest part for a new Hobbs technician, so start the log from the first day on a job.
- In Hobbs, pass the general examination on principles, equipment and terminology for the method.
- Pass the specific examination on the procedures, equipment and acceptance standards your Hobbs employer really uses.
- In Hobbs, pass the practical examination on real specimens, graded by a Level III or a qualified examiner working under one.
- In Hobbs, pass the vision examination: near-vision acuity and colour-contrast differentiation at the intervals the written practice sets. The SNT-TC-1A eligibility checker shows what to expect.
- Receive certification signed by your Hobbs employer.
- In Hobbs, recertify at the interval the written practice sets, which SNT-TC-1A recommends should not exceed five years, by examination or documented performance as permitted.
In Hobbs, ASNT central certification (ASNT 9712 for Level I and II, and ASNT NDT Level III examinations) is the alternative if you want a credential that stays with you rather than with an employer. Atlantis prepares candidates for that route too. See ASNT certification.
Level 1, Level 2 and Level 3 NDT courses for Hobbs technicians
In Hobbs, each course follows the body of knowledge in SNT-TC-1A for its method. In Hobbs, level 1 courses cover the fundamentals and working under supervision, Level 2 courses cover setting up, calibrating, performing and evaluating examinations to a procedure, and Level 3 preparation covers the basic and method examinations for those who will write procedures and examine others.
| Method | What the course covers | Where it is used around Hobbs |
|---|---|---|
| UT | Sound physics, calibration, thickness gauging, angle-beam weld examination, reporting | Wall-loss surveys on tanks, vessels and piping; weld checks on new facilities |
| RT | In Hobbs, exposure technique, image quality, film and digital interpretation, radiation safety basics | In Hobbs, pipeline and facility welds where radiography is specified; weld acceptance on tie-ins |
| MT | Magnetising methods, field direction, particle application, indication evaluation | Structural and pressure welds, drilling and lifting equipment, repair areas |
| PT | Process control, dwell times, surface preparation, indication interpretation | Stainless and alloy piping, small-bore connections, repair welds |
| VT | Acuity and lighting, weld profile, discontinuities, measuring tools, reporting | First examination on facility, pipeline and skid-fabrication welds |
| PAUT | In Hobbs, focal laws, encoded scanning, data analysis, sizing (UT Level II first) | Pipeline welds and corrosion mapping where the operator accepts phased array |
| TOFD | Diffraction technique, setup, flaw sizing (UT Level II first) | Thick-wall welds on processing and refinery equipment |
In Hobbs, PAUT and TOFD are advanced ultrasonic techniques and are generally taken after UT Level II. In Hobbs, whether they can be used on a given job depends on the customer's specification and the employer's written practice.
Ultrasonic testing (UT) training in Hobbs
Ultrasonic testing is the method a Hobbs technician reaches for once visual inspection is not enough. Level I training builds the fundamentals: how sound travels in steel, how to set up and calibrate the flaw detector, and how to take accurate thickness readings. Level II adds angle-beam weld examination, evaluation against the acceptance standard in the procedure, and reporting that another person can rely on.
In the Permian, produced water and sour service make internal corrosion a constant concern for tanks, separators and piping, and thickness monitoring is routine work. New construction brings its own demand, with weld examination on pipelines and facility piping. Use the Practical NDT simulator to rehearse scanning patterns and set-ups, read the course outline on the ultrasonic testing training page, and check your theory with the UT Level 2 practice questions.
Where NDT technicians work around Hobbs
Oil and gas production. Lea County is one of the busiest oil-producing counties in New Mexico. Operators and service companies maintain wells, flowlines, tank batteries and produced-water systems, and contractors there are often asked to show qualification records as part of operator onboarding.
Midstream and processing. Gas processing plants, compressor stations and the gathering and transmission pipelines linking them are a large source of inspection work. Piping and vessel work follows ASME B31.3 and B31.8 and API standards, and field welds are inspected visually and by radiography or ultrasonic methods depending on the specification.
Refining. The Navajo refinery in Artesia, within driving distance to the northwest, is one of the larger industrial facilities in southeastern New Mexico. Refineries run turnaround and in-service inspection programmes under API 510, 570 and 653, which employers may require inspectors to hold separately from NDT method certification.
Nuclear fuel cycle and waste. The Urenco USA enrichment plant near Eunice, in Lea County, and the Department of Energy's Waste Isolation Pilot Plant near Carlsbad are major employers with strict quality assurance programmes. Their contractors work to facility and nuclear quality requirements that go beyond a general SNT-TC-1A course, so the employer and its Level III set the qualification route.
Mining and fabrication. Potash mining and processing in the Carlsbad area, along with oilfield fabrication shops and welding contractors in Hobbs, add structural and equipment inspection.
For earnings information on Hobbs-area work, see our NDT salary guide, which cites public sources. Permian demand is cyclical, and technicians with several methods tend to ride out slow periods better.
NDT schools and classes near Hobbs: what to compare
NDT schools and classes near Hobbs are limited, and many technicians travel to Midland, Odessa or farther afield, or choose self-paced options. A classroom works for someone who can step away for a block of days and wants supervised time on specimens. Online theory works better for a working technician who rotates between sites, or for a company that wants to qualify field staff without long absences.
Compare providers on the questions that decide whether the training will help: does the provider certify you or does your employer, will the operator or plant owner accept the hours, who grades the practical, and is that person a Level III? Ask also whether the training will fit the written practice your employer already has, since contractor audits read that document and the records behind it.
Atlantis NDT has no classroom in Hobbs. We offer online theory with Level III Q&A and the Practical NDT simulator, and the practical examination is done at the employer's facility. Our near-me guide explains how to approach employers about sponsorship, and the Permian Basin page covers the wider region.
Online NDT training in New Mexico
Technicians in New Mexico can complete Level I and II theory online and self-paced on the Atlantis portal, with Level III Q&A on the material. Access opens the moment you enrol, so a Hobbs technician on a hitch or a rotating shift can study when time allows. The hands-on training and practical examination are in person at your employer's facility, and the employer certifies. In Hobbs, see online NDT training and the New Mexico training page.
Online theory covers the classroom portion only. In Hobbs, the Level III is available to answer questions while you study, and the portal opens the moment you enrol. In Hobbs, courses run year-round, so there is no fixed start date to wait for. Your employer's written practice still decides how many classroom hours count, which is why it helps to ask your Hobbs employer before you enrol.
Training a crew at your Hobbs facility
A Hobbs contractor with a group to qualify can run the entire programme at its own pace: self-paced online theory so crews keep working, then specific and practical examinations at your shop on your equipment and representative welds and piping. The specific examination can be written around the operator specifications and acceptance criteria your crews apply on the lease or in the plant.
If your written practice needs to be updated before an operator or plant audit, our Level III can review it. See written practice development and corporate NDT training, or ask about training a Hobbs crew.
For Hobbs candidates the practical examination is hands-on with real equipment and specimens and is never conducted remotely. In Hobbs, if you want help writing the Level III side of the programme, see outsourced Level III consulting.
Radiography licensing in New Mexico
New Mexico holds NRC Agreement State status. The New Mexico Environment Department's Radiation Control Bureau regulates radioactive materials and radiation machines, which covers industrial radiography. A radiography company working around Hobbs needs the state licence, and individual radiographers must satisfy its training, examination and supervision conditions. Federal facilities and some nuclear sites in the region operate under different authorities, so confirm which regulator applies to a given site. An RT course does not authorise anyone to use a source or license a radiographer. Employers normally need both radiation safety authorisation and SNT-TC-1A certification covering technique and interpretation. Verify current requirements with the Radiation Control Bureau.
Practise before your practical exam
The Practical NDT browser simulator lets a Hobbs technician rehearse set-ups, scanning coverage and interpretation in virtual workplaces between hands-on sessions, and the NDT practice tests cover the general and method theory. They are rehearsal tools. They do not replace hands-on training, logged experience or the practical examination on real specimens under your Hobbs employer's written practice.
Your instructor
In Hobbs, training is led by Anoop Rayavarapu, an ASNT NDT Level III in UT, RT, MT, PT and VT with more than eleven years of international field experience. In Hobbs, he sets course content, oversees examinations, and reviews written practices and procedures for employer clients.
Frequently asked questions about NDT training in Hobbs
How do I get NDT certified in Hobbs?
Be employed or sponsored by a company with an SNT-TC-1A written practice, complete its training and experience, pass the general, specific and practical examinations and a vision test, and the employer certifies you.
Is there NDT work in Hobbs and Lea County?
Yes, mainly in oil and gas production, midstream, refining and facility construction, with some nuclear fuel cycle and mining work. Demand follows drilling activity, so ask operators and contractors directly.
Can I take NDT classes online in New Mexico?
Yes, the theory is online and self-paced. Practical training and the practical examination are hands-on with your employer.
Which method should I learn first for Permian work?
Visual weld inspection and ultrasonic thickness are the usual starting points, with magnetic particle and radiography added by many technicians.
How long is Level 2 training?
The employer's written practice sets the hours. See the training-requirements matrix for SNT-TC-1A recommended hours; experience usually takes longest.
Do I need API 510 or 570 as well?
Some employers also ask for API inspector certifications, which are separate from NDT method certification, and Atlantis does not teach them. Check what your target employer expects.
Can I get Level III training in Hobbs?
In Hobbs, yes, preparation is online and self-paced with Level III Q&A. See ASNT Level III training.
Does a course certify me?
No. Under SNT-TC-1A the employer certifies. ASNT central certification is the alternative if you want a credential not tied to one employer.
Where are the published fees?
In Hobbs, the published US fees are in the table on this page. In Hobbs, register and Buy Now opens the course on the Atlantis portal.
Are there other training pages near Hobbs?
Yes. Nearby markets with their own guides include Midland, Odessa, El Paso, Albuquerque, and the New Mexico training page covers the state as a whole.
Part of NDT training in New Mexico, NDT training in the USA and the wider NDT training programme at Atlantis NDT.
NDT training and certification from Hobbs, NM
There is no Atlantis classroom in Hobbs, NM. You study the theory online at your own pace, practise in the Practical NDT simulator, and complete hands-on training and the practical examination at your employer's facility, under a written practice built on ASNT SNT-TC-1A. The published US fees are on this page, and Register & Buy Now opens the course on the Atlantis portal.
AWS CWI exam prep for Hobbs, NM
Welders, QC inspectors and fabrication staff in Hobbs, NM who want the AWS Certified Welding Inspector credential can take our six-day CWI exam prep course in three formats: corporate for a team at your facility, online at your own pace, or one-to-one, online or in person. AWS administers the examination and issues the certification.
Start NDT training any time of year
Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.
- Monthly starts
- Portal access opens the moment you enrol, at any time of year.
- Level III support
- Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
- Practical arrangements
- Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.
NDT training fees — United States
Published fees for ASNT SNT-TC-1A Level I and Level II training in the United States, and for the online Level III refresher. All fees are in US dollars.
| Package | Training hours | Package fee |
|---|---|---|
| Level I — all 5 methods | 104 hours | $2,799 |
| Level II — all 5 methods | 112 hours | $2,799 |
| Method | Fee per method |
|---|---|
| Visual Testing (VT) | $349 |
| Penetrant Testing (PT) | $399 |
| Magnetic Particle Testing (MT) | $399 |
| Ultrasonic Testing (UT) | $799 |
| Radiographic Testing (RT) | $899 |
| Level III refresher | Fee per method |
|---|---|
| Basic (general examination) | $1,260 |
| Ultrasonic Testing (UT) | $1,260 |
| Radiographic Testing (RT) | $1,260 |
| Magnetic Particle Testing (MT) | $900 |
| Liquid Penetrant Testing (PT) | $900 |
| Visual Testing (VT) | $900 |
The Atlantis course page shows the price for your country. Pay with your local card and your course access opens automatically.
- Level I and Level II: materials and exam preparation are included. Training hours follow the recommended initial hours in ASNT SNT-TC-1A Table 6.3.1A; final hours are set by the employer's written practice.
- Payment: 50% in advance to start training, with the 50% balance due before the certificate is issued. Applicable taxes may apply.
- Level III refresher: fees cover online course access, study materials, mock exams and instructor support. ASNT examination fees are paid separately to ASNT and are not included.
- Fees are subject to change. Group and corporate programmes are quoted on request.
Published fees for other regions: Middle East, Europe, South East Asia. Training outside the United States, the Middle East, Europe and South East Asia (including Canada, Australia, New Zealand and Africa)? Contact us for fees in your region.