NDT Inspection Management ERP in St. John's — Certification, Calibration and Work Orders in One System
Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in St. John's, Canada. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one fully customized platform with 30+ business apps behind it.
Modules inspection companies actually switch for
- Certification tracking — SNT-TC-1A / ISO 9712 / certification currency with computed status, 90-day expiry warning tasks, email alerts and blocked double-booking.
- Calibration management — instrument, block and probe calibration intervals with ISO 17025 traceability chains.
- Work order management — multi-crew, multi-site dispatch with mobile offline field capture.
- Document control — procedures, written practices and technique sheets under ISO 9001 revision control.
- Asset management — NDT equipment by serial number with issue, return, calibration and maintenance history.
Integrations
Atlantis ERP has an open REST API, so it connects to SAP, Maximo, NetSuite or any other system that accepts API connections; each integration is scoped with you during implementation.
Frequently Asked Questions
Does Atlantis NDT ERP suit an inspection company based in St. John's?
Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with expiry warnings and blocked double-booking, equipment calibration due-date control, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for Canada are configured during onboarding rather than sold as an add-on module.
How long does implementation take for a mid-size St. John's inspection contractor?
A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.
Can it replace the spreadsheets we use for technician certification and equipment calibration?
That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and each certificate carries a computed status, with 90-day expiry warning tasks, email alerts, timesheet warnings and blocked double-booking. Equipment calibration is tracked the same way — due dates on every flaw detector, thickness gauge and reference block raise warnings before they lapse. That removes the two failure modes that most often cost inspection firms a client audit.
See it on your own workflow
Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.
Related: Atlantis NDT ERP · NDT inspection software · inspection management software · Digital Twin in St. John's · NDT reporting software.
The St. John's NDT services market, from the provider's side
St. John's is the onshore base for Newfoundland and Labrador's offshore oil industry — gravity-based platforms and FPSOs, a new fixed platform at West White Rose, and Bay du Nord in development review — backed by a working harbour dockyard and the province's Bull Arm fabrication site.
Inspection companies work offshore integrity and topsides scope on producing installations, FPSO refit and life-extension campaigns, platform commissioning, Coast Guard and commercial refits in the harbour, and fabrication examination at Bull Arm. For the companies doing this work, the operational load concentrates around the offshore installations served from the city, the St. John's harbour dockyard, and the Bull Arm site on Trinity Bay — and the back office that keeps crews certified, equipment calibrated and reports moving is what decides which providers grow.
Marine and port inspection: survey-driven, class-society-shaped
Marine NDT runs on the classification societies' clock — gaugings and surveys tied to dry-dock windows that do not move for anyone's staffing problems. Inspection companies serving shipyards and ports juggle vessel projects measured in thousands of thickness readings, crane and cargo-gear examinations under statutory schedules, and clients who want the survey package in the class society's expected format. Software that captures readings against a hull grid and produces the report the surveyor will actually accept saves days per vessel, and days per vessel is what wins yard relationships.
The business side is feast-and-famine: dry-dockings cluster, then the yard goes quiet. Scheduling and certification tracking across a workforce that surges with contract technicians — each of whom must be verified before they touch class work — is where an ERP for inspection companies earns more than any single feature.
What an ERP built for NDT companies covers in St. John's
Survey-driven work in St. John's needs volume handling — thousands of readings per vessel — which is why Atlantis pairs NDT inspection software capture with the scheduling and certification machinery around it:
Certification and personnel tracking. Every technician's methods, levels, expiry dates, eye-exam currency and Written Practice records under SNT-TC-1A or CP-189 — with the audit view a client's quality department expects, ready before they ask.
Equipment and calibration management. The instrument register with calibration due dates, certificates attached, and traceability that satisfies ISO 17025-minded reviewers — so nothing leaves the shop out of date.
Work order and crew scheduling. Who is qualified, who is available, what the job needs — matched in one view, from a single technician call-out to a full turnaround mobilisation.
NDT reporting. Findings captured once — in the field or the shop, offline if needed — flowing into code-referenced report templates, so the deliverable ships while the competitor is still retyping field sheets. This is the inspection management software layer clients actually see.
Quoting, invoicing and job costing. Hours, equipment and consumables tied to each work order as they happen, so every job shows its true margin and the next bid learns from the last one.
Cloud-based, mobile in the field, and fully customizable to how your operation already works. See the NDT inspection software platform · the full business management suite · talk to us about St. John's.
Frequently asked questions
Does Atlantis understand how St. John's inspection companies operate?
The platform is built by ASNT Level III practitioners around the workflows above — certification tracking, calibration, field data capture, code-referenced reporting — rather than adapted from generic field-service software. Regional specifics like the client mix around the offshore installations served from the city, the St. John's harbour dockyard, and the Bull Arm site on Trinity Bay shape configuration, not custom development.
Can we keep our existing report formats and client requirements?
Yes — report templates, client-specific deliverables and your Written Practice structure are configuration. The system adapts to how you already serve your clients; switching software should never mean renegotiating what your clients receive.
Related: why inspection companies replace spreadsheets · NDT ERP vs generic ERP · compared with NetSuite.
St. John's: an offshore province where every asset is reached by sea or air
Newfoundland and Labrador's offshore production comes from structures that shape inspection differently. Hibernia and Hebron stand on fixed gravity-based structures, Hebron being the province's first heavy-oil field; Terra Nova and White Rose produce through FPSOs, and both have recently come through long refits, Terra Nova offline for years before resuming and the SeaRose returning after its own refit. Cenovus's West White Rose project added a concrete gravity structure towed out of Placentia Bay, topsides built by Kiewit Offshore Services and a tie-back to the SeaRose, moving into offshore commissioning once construction and welding were complete. Equinor has filed its Bay du Nord development plan with the offshore regulator, a project that could become the province's first deepwater oil development.
Onshore, the harbour and the bays carry their own work. St. John's Dockyard, trading as Newdock, refits Canadian Coast Guard ships under the national shipbuilding strategy, including a major conversion and refit of an icebreaking buoy tender with propulsion inspections, on top of its usual short refits. The province owns the Bull Arm site on Trinity Bay, operated by OilCo, and has launched a pre-FEED study for a floating dry dock there aimed at ship repair, marine construction, offshore support, defence and decommissioning, which would add another category of steel and structural examination to the region.
For an inspection business, the defining constraints are access and evidence. Offshore scope is governed by weather windows, helicopter seats and bed space on the installation, so a technician who arrives with a lapsed certificate or an out-of-calibration instrument has cost far more than a day. FPSO refits and new-platform commissioning generate concentrated examination campaigns reviewed by owners and their certifying bodies, while dockyard refits run against fixed delivery dates. A firm working from St. John's needs personnel, calibration and job records settled before anyone boards a helicopter or a vessel, and reports the operator and the regulator can follow without a phone call back to the field.
Regulation and certification for inspection work in St. John's
Offshore petroleum activity is regulated by the Canada-Newfoundland and Labrador Offshore Energy Regulator, the former C-NLOPB, renamed when amendments to the Atlantic Accord Acts came into force and its mandate widened to offshore renewable energy. Offshore worker safety and environmental protection remain its stated priorities, and Equinor's Bay du Nord development plan application is now in its review. Onshore, the province's Department of Government Services is the point of contact for boilers, pressure vessels and compressed gas systems, including design approval, so dockyard, fabrication-yard and plant equipment in and around St. John's sits under a provincial regime while offshore installations answer to the joint federal-provincial regulator.
Offshore and onshore alike, NRCan certification under CAN/CGSB-48.9712 is the national third-party option for NDT personnel, while operators and their contractors may specify employer-based SNT-TC-1A qualification or added requirements for particular scopes, and radiography at the dockside or at Bull Arm brings CNSC exposure device operator certification into play. Offshore work layers the operator's own training and medical requirements over the technical credentials. The platform keeps those layers side by side for each technician — scheme, method, level, expiry, offshore and site training — and flags gaps before a helicopter seat is booked. It holds the records a company's scheme requires rather than issuing any certification.
Problems inspection companies bring to us
Problem-by-problem guides showing how inspection companies remove them with Atlantis NDT.