NDT Inspection Management ERP in Kincardine — Certification, Calibration and Work Orders in One System

Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in Kincardine, Canada. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one fully customized platform with 30+ business apps behind it.

Modules inspection companies actually switch for

Integrations

Atlantis ERP has an open REST API, so it connects to SAP, Maximo, NetSuite or any other system that accepts API connections; each integration is scoped with you during implementation.

Frequently Asked Questions

Does Atlantis NDT ERP suit an inspection company based in Kincardine?

Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with expiry warnings and blocked double-booking, equipment calibration due-date control, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for Canada are configured during onboarding rather than sold as an add-on module.

How long does implementation take for a mid-size Kincardine inspection contractor?

A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.

Can it replace the spreadsheets we use for technician certification and equipment calibration?

That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and each certificate carries a computed status, with 90-day expiry warning tasks, email alerts, timesheet warnings and blocked double-booking. Equipment calibration is tracked the same way — due dates on every flaw detector, thickness gauge and reference block raise warnings before they lapse. That removes the two failure modes that most often cost inspection firms a client audit.

See it on your own workflow

Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.

Related: Atlantis NDT ERP · NDT inspection software · inspection management software · Digital Twin in Kincardine · NDT reporting software.

The Kincardine NDT services market, from the provider's side

Kincardine's economy turns on the Bruce Power site on Lake Huron, a multi-unit nuclear station whose proposed expansion would make it the largest nuclear facility in the world, and where reactors are being taken down one after another for Major Component Replacement while the rest keep generating.

Inspection work is long-programme nuclear scope — examination tied to replacing steam generators, pressure tubes, calandria tubes and feeders, plus planned maintenance outages on the operating units — under the procedure and personnel regime a nuclear licensee demands. For the companies doing this work, the operational load concentrates around the Bruce A and Bruce B stations, the refurbishment outages moving unit by unit, and the predevelopment work for a potential Bruce C — and the back office that keeps crews certified, equipment calibrated and reports moving is what decides which providers grow.

Refurbishment programmes and the inspection companies that support them

A nuclear refurbishment is not an outage season. It is a long sequence of unit outages planned years ahead, each with its own scope, its own contractor qualification requirements and its own documentation expectations. The inspection company's product is consistency: the same qualified technicians, the same approved procedures and the same evidence trail unit after unit, with the licensee's quality programme deciding what is acceptable.

That puts the pressure on records rather than on dispatch. Certifications under whichever scheme the licensee's programme names, training and experience records, procedure revisions and instrument calibration all have to stay current for the length of the programme and be retrievable whenever the licensee or its authorized inspection agency asks. One system of record for people, procedures, equipment and reports is what keeps that evidence consistent from one unit to the next.

What an ERP built for NDT companies covers in Kincardine

Outage-cycle markets like Kincardine are won in the preparation months, and Atlantis is the readiness system as much as the NDT inspection software used during the outage itself:

Certification and personnel tracking. Every technician's methods, levels, expiry dates, eye-exam currency and Written Practice records under SNT-TC-1A or CP-189 — with the audit view a client's quality department expects, ready before they ask.

Equipment and calibration management. The instrument register with calibration due dates, certificates attached, and traceability that satisfies ISO 17025-minded reviewers — so nothing leaves the shop out of date.

Work order and crew scheduling. Who is qualified, who is available, what the job needs — matched in one view, from a single technician call-out to a full turnaround mobilisation.

NDT reporting. Findings captured once — in the field or the shop, offline if needed — flowing into code-referenced report templates, so the deliverable ships while the competitor is still retyping field sheets. This is the inspection management software layer clients actually see.

Quoting, invoicing and job costing. Hours, equipment and consumables tied to each work order as they happen, so every job shows its true margin and the next bid learns from the last one.

Cloud-based, mobile in the field, and fully customizable to how your operation already works. See the NDT inspection software platform · the full business management suite · talk to us about Kincardine.

Frequently asked questions

Does Atlantis understand how Kincardine inspection companies operate?

The platform is built by ASNT Level III practitioners around the workflows above — certification tracking, calibration, field data capture, code-referenced reporting — rather than adapted from generic field-service software. Regional specifics like the client mix around the Bruce A and Bruce B stations, the refurbishment outages moving unit by unit, and the predevelopment work for a potential Bruce C shape configuration, not custom development.

Can we keep our existing report formats and client requirements?

Yes — report templates, client-specific deliverables and your Written Practice structure are configuration. The system adapts to how you already serve your clients; switching software should never mean renegotiating what your clients receive.

Related: why inspection companies replace spreadsheets · NDT ERP vs generic ERP · compared with NetSuite.

Kincardine: a refurbishment programme that is the market

Bruce Power's Life Extension Program sets the tempo for the whole Kincardine area. One unit has completed Major Component Replacement and returned to the grid, the next came back well ahead of schedule as the first to use robotics on the reactor face, another is mid-outage and tracking faster still, and a further unit has just been taken offline to start its own, with the remaining units scheduled to follow. Each outage removes and replaces steam generators, pressure tubes, calandria tubes and feeder tubes, extending reactor life by decades. Beyond that, Bruce Power and the Ontario government have signed a predevelopment agreement for Bruce C, a proposed expansion now in federal impact assessment, with a CNSC licence-to-prepare-site application still to come.

For an inspection company this is not an outage season but a production line of outages, each expected to improve on the last. The examination work — pre-service inspection of new components, verification of installed equipment, in-service inspection on the units still generating — is planned far ahead, and the owner openly measures each successive replacement outage against the one before it. Vendors that cannot show the same crews, procedures and qualification evidence getting faster and cleaner from one unit to the next lose ground to those that can, because performance on the learning curve is exactly what the client is tracking.

The local labour market adds pressure. A rural lakeshore community hosting a programme of this size has to draw much of its specialised workforce from outside the immediate area, and the same qualified people are courted by every contractor on site. Records portability therefore matters: a technician's nuclear-site training, radiation-protection status, method certifications and procedure qualifications have to be demonstrable instantly when they move between scopes or employers. Inspection companies that hold those records cleanly, alongside equipment calibration traceable to the component examined, spend less time proving currency and more time on billable work — and are ready when a later outage, or Bruce C, asks for the history of what was done before.

Regulation and certification around the Bruce site

The Bruce nuclear stations operate under licences from the Canadian Nuclear Safety Commission, and an expansion such as Bruce C must complete a federal impact assessment before Bruce Power can apply to the CNSC for a licence to prepare the site. For pressure-retaining nuclear components, TSSA serves as Ontario's Authorized Inspection Agency, recognised by the CNSC, performing engineering reviews, inspections and quality audits and verifying repairs and alterations against CSA Group, ASME and National Board requirements. Conventional boilers and pressure vessels elsewhere in Ontario come under TSSA's boilers and pressure vessels programme, which adopts CSA B51 through its code adoption document. On nuclear scope, a contractor's examination records can be reviewed by the licensee, by the authorized inspection agency and by the federal regulator.

Personnel requirements on nuclear work are set by the licensee's programme and the applicable nuclear standards rather than by contractor preference. At national level, NRCan remains the third-party certifier under CAN/CGSB-48.9712 and is also the qualifying body for the CNSC's exposure device operator examination, the certification that operating a radiography exposure device requires. A vendor whose own practice is built on SNT-TC-1A or CP-189 still has to meet whatever the licensee accepts on site. The platform holds all of these credentials per person — national certificates, employer qualifications, operator certification, site-specific nuclear training and every expiry date — so the evidence an authorized inspector or licensee auditor asks for is already assembled. It keeps the records; certification itself comes from the bodies named here.