Pipeline Inspection Services in Los Angeles 2026 — ASNT Level III Led
Atlantis NDT delivers pipeline inspection services in Los Angeles. Methods: UT (including PAUT and TOFD), MT, PT and VT, with procedures and reports reviewed by an ASNT NDT Level III. Los Angeles facilities in the refining, aerospace & manufacturing sectors require rigorous pipeline inspection services. Technicians are certified by their employer to its SNT-TC-1A written practice. Where we work: nationwide. Technicians are mobilised to your site anywhere in the USA; apart from the Houston office there is no local office, so mobilisation is planned and quoted for each job.
In the United States, Atlantis does not perform radiographic testing (RT): industrial radiography is licensed under NRC rules (10 CFR Part 34) or Agreement State rules. Where the code and the owner allow, ultrasonic testing is the volumetric alternative, and an ASNT Level III can review the radiographs and RT procedures of your licensed radiography contractor.
Pipeline Inspection Services Scope
Pipeline inspection covers: girth weld examination by UT, PAUT and RT; wall-loss measurement by UT thickness and corrosion mapping on above-ground sections and at integrity digs; surface-crack examination by MT — all per API 1104, ASME B31.4/B31.8, and 49 CFR 192/195 where applicable. In-line inspection tool runs are made by ILI vendors; excavation is by the dig contractor. Atlantis NDT Level III approves every Procedure + signs off final disposition + audit-ready records via Atlantis NDT ERP.
Code + Compliance
Pipeline Inspection Services per: ASME B&PV Sections V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 1104 + 1169; ASTM E-series; ISO 17635/17636/17640; AWS D1.1/3.6; IACS Rec-20 marine; NACE MR0175 + MR0103 sour-service.
Free Consultation
Atlantis NDT publishes no pricing — varies by region + scope. Request your free 30-minute consultation. Every job is quoted on request. See also verticals, Los Angeles ERP, Los Angeles training, Los Angeles consulting.
What pipeline inspection involves
Pipeline inspection establishes the condition of a line along its length, combining in-line inspection where the line is piggable with direct assessment where it is not, and verifying both against excavation findings.
Scope of work
- In-line inspection data review and dig prioritisation from MFL, ultrasonic and crack-detection runs
- Guided wave screening of cased crossings and inaccessible sections
- Dig verification with ultrasonic wall measurement and magnetic particle crack examination
- Coating and cathodic protection survey interpretation
- Girth weld examination by automated ultrasonic testing or radiography on new construction
Governing codes
ASME B31.4 and B31.8 for design and operation, B31.8S for integrity management, API 1104 for welding, and the applicable regulator's integrity management rule.
The Los Angeles asset base
Los Angeles is the historical heart of California refining, with Marathon Carson (formerly Tesoro/Andeavor — the largest refinery on the West Coast at 363,000 bpd), Phillips 66 Wilmington/Carson, Valero Wilmington, Chevron El Segundo, and Marathon Wilmington collectively processing over 1.4 million bpd of crude. The Ports of Los Angeles and Long Beach handle massive crude and product imports, and the SoCalGas underground gas-storage network (Aliso Canyon, Honor Rancho, Playa del Rey) requires rigorous well-integrity monitoring under CalGEM oversight after the 2015 Aliso Canyon leak. California's AB 1647 refinery-monitoring requirements, CARB low-carbon-fuel standards, and South Coast AQMD rule 1180 create a compliance environment ideally suited to digital twin reporting.
How the work is controlled
Agree personnel qualification, equipment checks, procedure revision and review responsibilities for the examination. Retain those records with the results and coverage limitations.
What you receive
- A report in your required format, with findings located against the component and, where relevant, against a persistent corrosion monitoring location so trends stay continuous between campaigns
- Raw data in the instrument-native format plus an open export, so the dataset outlives any single supplier relationship
- The procedure revision, technician certification state and instrument calibration status applicable at the time of examination
- Where a finding affects continued service, the specific code clause governing the acceptance decision
Related: asset integrity management software · inspection management software · ASNT Level III consulting · digital twin for asset integrity. Request a quote for Los Angeles.
Part of NDT inspection services in California and the full range of NDT inspection services from Atlantis NDT.
Pipeline metal loss inspection in Los Angeles: in-line inspection, dig verification and California regulators
The search that brings most people to this page is "pipeline metal loss inspection services". On a piggable line, metal loss is normally found by an in-line inspection (ILI) tool, usually magnetic flux leakage or ultrasonic, that a specialist ILI vendor runs through the pipe for the operator. Atlantis does not run in-line inspection tools and is not an ILI company. What Atlantis does is the conventional NDT that follows a tool run: it measures and documents the features at the excavations the operator selects, and it examines above-ground piping at stations and terminals with UT, MT, PT and VT.
In-line inspection and dig verification: two halves of one job
An ILI report lists anomalies by log distance, clock position, length, width and estimated depth. The operator's integrity engineers decide which to excavate, either to repair them or to check how accurate the tool was. At the dig, the NDT crew turns an estimate into a measurement. Typical dig work includes:
- locating the feature from the nearest girth welds and reference markers named in the ILI report
- a visual record of coating condition and external corrosion before and after cleaning
- a UT thickness grid across and around the corroded area, plus pit depth readings with a gauge where the external profile can be measured directly; see ultrasonic testing for pipelines
- magnetic particle testing, often wet fluorescent, to look for stress corrosion cracking under disbonded coating and cracking at dents or weld toes: magnetic particle testing for pipelines
- UT lamination checks on the pipe body where a sleeve or a weld is planned
The measured profile goes to the operator's engineer, who runs the remaining-strength assessment, for example with ASME B31G or RSTRENG, and decides on repair. Atlantis reports the measurements and does not make that call.
Who regulates Los Angeles pipelines?
California splits pipeline safety by commodity. The Office of the State Fire Marshal's Pipeline Safety Division holds safety authority over intrastate hazardous liquid pipelines, including lines in offshore state waters, under certification from PHMSA, and it monitors operators' hydrostatic tests and in-line inspections. The California Public Utilities Commission's Gas Safety and Reliability Branch covers intrastate gas systems. Pipelines that cross state lines or start in federal waters stay with PHMSA. The integrity management rules behind most dig programs sit in 49 CFR Part 192, Subpart O for gas transmission and 49 CFR 195.452 for hazardous liquid lines.
What a dig verification report should contain
- the ILI feature number, log distance and girth weld references, so the field result can be matched to the tool call
- a sketch or photograph with the reading grid laid out from a fixed datum
- nominal wall, the deepest reading and the axial and circumferential extent of the corroded area
- MT results with indication location, length and orientation, including a clear statement when none were found
- procedure revision, technician certification and instrument calibration for each method
How Los Angeles providers compare
ILI vendors sell the tool run and the data analysis. Large integrity firms add engineering, GIS and repair management. Field NDT firms supply crews for digs and station piping. When you compare bids for dig work, ask whether the crew will report a measured profile you can use for the remaining-strength calculation, whether MT technicians are certified for the technique you specify, and when the report will be issued. Get the answer to the last one in writing.
Atlantis on Los Angeles pipeline work
Atlantis is based in Houston and sends crews to Los Angeles digs, pump stations and terminal piping for agreed dates, working under procedures approved by an ASNT NDT Level III. New girth welds that need radiographs go to a licensed radiography contractor, since Atlantis does not perform radiography in the United States; the Level III can review those images on request. Related pages: ultrasonic testing in Los Angeles, magnetic particle testing in Los Angeles, pipeline inspection services, NDT inspection services in California and ASNT Level III consulting. Send the dig list or ILI extract through the Los Angeles pipeline enquiry; we reply within one business day.