TOFD Training & Certification Course
Time-of-Flight Diffraction (TOFD) training for precision depth-sizing of planar weld flaws — probe-pair configuration and PCS calculation, lateral wave and back-wall echo interpretation, and the combined TOFD+PAUT technique used on pipeline and pressure-vessel welds per ASME Section V Article 4 and API 1104. Typically layered onto an existing UT or PAUT Level II certification. Online theory + on-site practical. See our PAUT Level 2 training, UT Level 2 course, or the full training catalogue.
| Method | Time-of-Flight Diffraction (TOFD) |
|---|---|
| Level | Level II |
| Scheme | ASNT SNT-TC-1A (employer-based) |
| Prerequisites | Conventional UT Level II (or equivalent documented UT experience) recommended; annual near-vision check |
| Training hours | Set by your employer's written practice — see the training requirements matrix for SNT-TC-1A recommended hours by method and level |
| Delivery | Self-paced online theory with Level III support · Onsite at your facility |
| Practical exam | Administered by an ASNT Level III under your written practice |
| Practice | Practical NDT simulator (practice only — not a substitute for the practical exam) |
| Instructor | Anoop Rayavarapu, ASNT NDT Level III |
Request a course quote. We reply within one business day; published US fees are on the US training page.
Get certified, or certify your team
Individuals train and sit examinations under their employer's written practice. Employers need that written practice, and a Level III to run it. Atlantis does both.
Practise TOFD set-up and scanning
Set the probe-centre separation, couple both probes and read the arrivals in the browser before your practical sessions.
Start NDT training any time of year
Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.
- Monthly starts
- Portal access opens the moment you enrol, at any time of year.
- Level III support
- Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
- Practical arrangements
- Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.
Ask about NDT training and practical arrangements
Tell us the methods and levels you need, how many technicians and where they work. We reply within one business day with the delivery options that fit, how the practical at your facility would work, and what your written practice requires.
Request a quote / enrol · Employer-sponsored training · info@atlantisndt.com