ASNT Level 2 UT Online Course

Ultrasonic Testing (UT) Level II training built around ASNT SNT-TC-1A requirements — online theory covering sound-wave physics, calibration and code interpretation, paired with hands-on on-site practical for scanning, calibration and flaw sizing. Typically 40 classroom hours for Level II per SNT-TC-1A recommended training-hour guidance, on top of the 40 Level I hours. Certification runs on a 5-year SNT-TC-1A/CP-189 cycle with an annual vision test tracked separately. ASNT NDT Level III-led delivery, online + on-site + hybrid. See the full NDT training catalogue, our PAUT Level 2 training, or corporate group training.

UT Level II course facts
MethodUltrasonic Testing (UT)
LevelLevel II
SchemeASNT SNT-TC-1A (employer-based)
PrerequisitesLevel I in the method (or the combined Level I + II hours); documented on-the-job experience; annual vision checks
Training hours40 h classroom + 630 h on-the-job experience (in addition to Level I: 40 h classroom, 210 h OJT) — SNT-TC-1A recommended minimums from our training requirements matrix; your written practice sets the binding figures
DeliverySelf-paced online theory with Level III support · Onsite at your facility
Practical examAdministered by an ASNT Level III under your written practice
PracticePractical NDT simulator (practice only — not a substitute for the practical exam)
InstructorAnoop Rayavarapu, ASNT NDT Level III

Request a course quote. We reply within one business day; published US fees are on the US training page.

Get certified, or certify your team

Individuals train and sit examinations under their employer's written practice. Employers need that written practice, and a Level III to run it. Atlantis does both.

Start NDT training any time of year

Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.

Monthly starts
Portal access opens the moment you enrol, at any time of year.
Level III support
Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
Practical arrangements
Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.

Ask about enrolment and practical arrangements

What a UT Level 2 online course covers

A UT Level 2 online course is for technicians who already hold, or are close to, UT Level I and need the formal Level II training hours their written practice requires. The online part carries the theory; the practical skills are built and examined on real equipment. This page covers the online course itself. The full Level II route, including experience hours and examinations, is on UT Level 2 training.

Theory covered online

  • Sound-beam physics for ultrasonic testing Level II work: beam spread, near field, attenuation and mode conversion.
  • Angle-beam examination with shear wave probes: refracted angle, skip distance and surface distance, and plotting indications on a weld cross-section.
  • Calibration: distance-amplitude correction (DAC) and time-corrected gain (TCG), reference reflectors and transfer correction.
  • Flaw sizing by amplitude-drop methods and their limits, and when sizing passes to PAUT or TOFD.
  • Codes and acceptance: ASME Section V Articles 4 and 5, ASME B31.3 and AWS D1.1 acceptance criteria, and how to write a report a Level III will sign.
  • Writing a technique sheet from a procedure, a Level II responsibility under SNT-TC-1A.

What cannot be done online

The Level II practical examination asks you to calibrate, scan a weld specimen containing hidden flaws, find, size and evaluate them against acceptance criteria, and report the result. That needs a flaw detector, probes and test pieces. Trainees practise set-ups in the Practical NDT simulator and complete hands-on training and the practical at their employer's site.

Experience hours still count

Course hours are only one part of Level II. SNT-TC-1A also recommends documented experience in the method, and many employers expect most of it to be weld examination under a Level II or Level III before they will certify. Keep a log of the jobs, the hours and the supervisor from the start, because the Level III signing your certification will ask for it.

Who should take it

The course suits working UT Level I technicians who need Level II for weld work, technicians certified in other methods who are adding UT, and employers moving staff up a level without taking them off the job. If you are new to UT, start with the UT Level 1 course. For exam-style questions, try the UT practice tests, and for the next step after Level II weld work, see PAUT Level 2 training. To enrol, contact the training team.