TOFD Inspection (TOFD) Services in Sydney 2026 — Atlantis NDT

How Time-of-Flight Diffraction (TOFD) works

TOFD places a transmitter and receiver either side of a weld and measures the arrival time of sound diffracted from the tips of a discontinuity, rather than the amplitude reflected from its face. Because sizing depends on diffraction timing rather than reflection amplitude, TOFD is largely insensitive to flaw orientation — the weakness that limits conventional pulse-echo on planar defects that are not favourably aligned to the beam.

What it detects

• Planar defects regardless of orientation — lack of fusion, lack of penetration, and cracks that pulse-echo can miss entirely
• Through-wall height with accuracy typically far better than amplitude-based sizing, which is what fitness-for-service assessment actually needs
• Flaw growth between inspections, because the same scan geometry reproduces closely
• Embedded defects across the full weld volume in a single pass along the weld

What it will not do

TOFD has a near-surface dead zone from the lateral wave and a back-wall zone that both require complementary coverage — normally pulse-echo or phased array. It also produces a grey-scale image that demands a trained interpreter; TOFD data reviewed by someone without specific TOFD qualification is a common source of both missed and over-called indications.

When Time-of-Flight Diffraction (TOFD) is the right choice

Choose TOFD where through-wall sizing drives a fitness-for-service or acceptance decision, where radiography is impractical for access or radiation-safety reasons, or where weld volume must be covered quickly on long seams.

Codes and acceptance criteria

Examinations are performed to written procedures qualified against ASME Section V Article 4 Mandatory Appendix III, ASME Code Case 2235 for ultrasonic examination in lieu of radiography, ISO 10863, ISO 15626 for acceptance, and API 1104 Annex A for pipeline girth welds. Acceptance criteria come from the construction or in-service code governing the item — ASME Section VIII for pressure vessels, ASME B31.3 for process piping, API 510, API 570 and API 653 in service, AWS D1.1 for structural steel — and the applicable edition is recorded against the examination so the disposition can be reconstructed later.

Sydney context

Sydney serves Australia east-coast industrial, marine, refining, infrastructure, or heritage markets where Atlantis NDT Digital Twin platform delivers inspection + RBI + FFS overlay aligned with Viva Energy, ExxonMobil, AGL, EnergyAustralia, BHP, and Tier-1 port + rail + tunnel operator workflows. Affordable, accessible, fully customizable.

How the examination is controlled

Every examination carries its own evidence chain: the technician's certification for the method and level under ASNT SNT-TC-1A or ISO 9712, current on the day of inspection; the calibration status of the instrument, probes, wedges and reference blocks used, traceable under ISO 17025; and the revision of the procedure and technique sheet in force at the time. An ASNT NDT Level III reviews and signs the final disposition. That bundle is exactly what a client or accreditation audit asks for, and it is recorded as the work happens rather than assembled afterwards.

What you receive

• A report in your required format, with indications located against the component and, where relevant, against a persistent corrosion monitoring location so trends stay continuous between campaigns
• Raw data files in the instrument-native format plus an open export, so the dataset outlives any single supplier relationship
• The procedure revision, technician certification state and instrument calibration status applicable at the time of examination
• Where a finding affects continued service, a clear statement of the code clause that governs the acceptance decision

Related: inspection management software · asset integrity management software · ASNT Level III consulting · NDT training and certification · digital twin for asset integrity. Request a quote for Sydney.