Practical NDT Simulator for Maryland Inspection Crews

Maryland packs an unusual spread of inspection work into a small state. A technician based near Baltimore can spend one month on cutter hulls at Curtis Bay, the next on heat exchanger tubing at a power station, and the one after that on aluminum airframe structure for a defense contractor. Few people keep every method sharp across that range. Practical NDT is the online simulator Atlantis NDT built for exactly that problem: it lets trainees and working technicians run complete inspection jobs on virtual parts and assets, from a laptop at home, a browser at the shop, or a VR headset in a training room, so the gaps between real jobs stop eroding skill.

This page looks at where Maryland's NDT work sits, which simulator methods and settings match it, and how a Maryland employer can fit simulator practice into an ASNT SNT-TC-1A program without pretending that practice is certification.

Where Maryland's NDT work actually happens

Maryland has no refinery belt and no oil field, so its inspection demand does not look like the Gulf Coast. It is driven by a port, a cluster of federal research and test sites, a nuclear plant, an LNG export terminal and a manufacturing base in the western counties. Here is the state region by region.

Baltimore harbor, Curtis Bay and Sparrows Point

The Port of Baltimore handles container, bulk and roll-on/roll-off cargo through terminals such as Dundalk and Seagirt. Around the harbor sit fuel and chemical terminals, bulk handling equipment, cranes and the steel that holds all of it up. At Curtis Bay, the U.S. Coast Guard Yard repairs and overhauls Coast Guard cutters and boats, which means steady shipyard welding and the hull, deck and piping inspection that goes with it. Down the Patapsco at Sparrows Point, the former Bethlehem Steel site has been redeveloped as the Tradepoint Atlantic logistics and port complex, bringing new structural steel, marine works and heavy equipment to the waterfront.

The harbor also lost the Francis Scott Key Bridge in March 2024, when a container ship struck one of its piers. The replacement crossing means years of bridge steel fabrication, which in the United States is welded and inspected to the AWS D1.5 Bridge Welding Code, with ultrasonic examination of groove welds playing a central part. Our Baltimore Practical NDT page covers the city in more depth.

Southern Maryland: Calvert and St. Mary's counties

On the Chesapeake shore at Lusby, Calvert Cliffs Nuclear Power Plant runs two pressurized water reactors, and its neighbor, the Cove Point LNG terminal, liquefies and exports natural gas. A nuclear station generates outage work on condensers, feedwater heaters, piping and supports; an LNG plant adds cryogenic stainless and nickel-steel piping, large storage tanks and rotating equipment. Further south, Naval Air Station Patuxent River is home to the Navy's aircraft test and evaluation work, so airframe inspection, eddy current on fastener holes and composite-adjacent structure are part of the regional mix.

The capital corridor: Greenbelt, Andrews and Aberdeen

Between Baltimore and Washington, NASA's Goddard Space Flight Center in Greenbelt designs, assembles and tests spacecraft and science instruments. Spacecraft structures, propellant lines and pressure vessels get inspected with methods chosen to avoid contaminating flight hardware, which is a discipline of its own. Joint Base Andrews in Prince George's County flies and maintains military airlift aircraft. North of Baltimore, Aberdeen Proving Ground in Harford County is the Army's long-established test and evaluation site for vehicles, armor and weapons, with welded hulls and structural components that get examined between test campaigns.

Western Maryland and the Susquehanna

In Hagerstown, Volvo Group's powertrain plant builds engines and transmissions for Mack and Volvo trucks, which brings castings, forgings, machined shafts and gears into the picture: classic territory for magnetic particle and ultrasonic testing. On the lower Susquehanna, Conowingo Dam generates hydroelectric power, with turbine runners, wicket gates, penstocks and crane rails that need periodic examination. Across the state, utilities maintain gas distribution and transmission lines, and contractors inspect water tanks, process piping at food and pharmaceutical plants, and structural steel on commercial construction.

What one simulator covers

Practical NDT puts twelve method families in one place. Ultrasonic testing (UT) comes as straight-beam, angle-beam and thickness work. Phased array (PAUT) and time-of-flight diffraction (TOFD) sit alongside it. Radiography (RT) is offered as film, computed radiography and digital detector arrays. Magnetic particle testing (MT) uses AC and DC yokes; penetrant testing (PT) runs visible and fluorescent; visual testing (VT) covers direct viewing, borescope and drone inspection. Eddy current (ET) includes absolute, differential, bobbin and bolt-hole probes. The list closes with IRIS tube inspection, MFL tank floor scanning, guided-wave long-range UT and PMI by XRF.

Those methods are spread across 473 jobs and 33 lessons, staged in twelve settings. Two are general-purpose, the NDT lab and the welding workshop. Five are energy settings: an oil and gas location, a storage tank, a heat exchanger, a cross-country pipeline and an offshore wind farm. Two are marine, a merchant ship and a superyacht, and three belong to aerospace: a hangar for aircraft, a hall where satellites are assembled and a rocket propulsion facility. For a Maryland workforce, the marine and aerospace groups matter more than it would in most states, because shipyard, aviation and spacecraft work all appear within an hour's drive of each other.

Matching simulator practice to Maryland assets

Maryland assetWhere you find itMethods worth rehearsingSimulator pages
Cutter hulls, decks and shipboard pipingCurtis Bay, Baltimore harbor repair yardsUT thickness, MT on welds, VTUT simulator, MT simulator
Bridge and structural groove weldsKey Bridge replacement, Tradepoint Atlantic, commercial steelAngle-beam UT, PAUT, MTPAUT simulator, welding workshop
Condenser and feedwater heater tubesPower stations, including outage work in Calvert CountyET bobbin, IRISET simulator, heat exchanger
LNG and fuel storage tanksCove Point, Curtis Bay and Fairfield terminalsMFL floor scanning, UT shell thickness, PT on stainlessstorage tank, PT simulator
Airframes and fastener holesPatuxent River, Andrews, regional maintenance shopsET bolt-hole, PT, VT borescopeaircraft hangar, VT simulator
Castings, forgings and shaftsHagerstown powertrain, machine shopsMT, straight-beam UTNDT lab
Spacecraft structures and linesGreenbelt and the satellite supply chainPT, VT, ET, TOFD on thick sectionsTOFD simulator

Radiography belongs on the list too, for weld film interpretation and exposure planning, through the RT simulator. Practising it in software carries none of the licensing or radiation-safety obligations of real exposures, which is useful for trainees who have not yet been cleared to work near a source.

The twelve-step sequence behind every job

Every practical in the simulator follows the same written order of work, whichever method is in use. That consistency is the point: a supervisor in Baltimore can ask a new hire to run a mag particle job on a crane hook one day and a thickness survey on a cutter the next, and the habits being built are identical.

  1. Read the work order and the procedure revision it calls up.
  2. Confirm that the specimen, its material and the chosen method actually agree.
  3. Check the equipment record, including the revision the job pins.
  4. Prepare the surface and the part.
  5. Set up the instrument or consumables.
  6. Calibrate or verify on the reference standard.
  7. Examine the part with the specified technique and coverage.
  8. Record indications and readings as found.
  9. Review the quality of the data before calling the job done.
  10. Carry out the post-check on the equipment.
  11. Write up the training report.
  12. Debrief with the instructor.

Because the procedure and equipment revisions are locked for every job, a trainee cannot quietly skip calibration or forget the post-check. The evaluator gives credit only where the record shows a step was done. Judging what an indication means is left to the instructor, who reviews it; the software does not grade interpretation. Each job can also be run at three levels of assistance, from heavily guided to working unaided.

How Maryland employers can use it

Browser, laptop, headset or phone

There is nothing to install for a quick session: the simulator opens in a web browser. For regular use, the PC version downloads to a Windows laptop or desktop and keeps working offline, which suits a crew sitting in a site trailer at a terminal with no reliable connection. In VR, it runs on a standalone headset through WebXR, using hand tracking or controllers; probe angle, scan path and coverage feel more natural when your hands are doing the work. It also loads on a phone for short reviews.

Learners sign in once through the Atlantis client portal. Practical NDT is connected to the Atlantis LMS and ERP, so simulator records sit next to course records and training files; see the eLearning app for how that works. If you want to try ultrasonic signals before anything else, the free A-scan simulator runs in any browser without an account.

Certification in Maryland: what practice does and does not count for

Under ASNT SNT-TC-1A, a course, a simulator or a test center does not certify anyone. The employer certifies its own people against its written practice, after the required training, experience hours, and general, specific and practical examinations. The platform exists to train people and is not a validated engineering tool; it does not replace the practical examination, and it does not supply the field hours a written practice demands. What it does is give people more repetitions of good technique before and between the real thing. Our SNT-TC-1A eligibility guide lays out the hours and examinations.

Some Maryland work carries extra layers. Industrial radiography with real sources requires licensed operators under 10 CFR Part 34 or the equivalent state rules, and simulator time does not count toward those qualifications. Atlantis does not perform radiography in the United States. Nuclear station work is governed by the plant owner's own quality program, and Atlantis does not supply nuclear quality-assurance services; the simulator is simply a way for technicians to keep their eddy current and ultrasonic technique current.

If your people need the coursework behind the practice, Atlantis teaches it in SNT-TC-1A-based courses for Level 1 trainees, Level 2 technicians and Level III candidates; the Maryland training page explains how that reaches technicians in the state, since Atlantis's offices are in Houston and Hyderabad and it works everywhere else online or at the customer's site.

Practical NDT in neighboring cities and states

Maryland crews cross state lines constantly, particularly into Delaware, Pennsylvania, Virginia and the District. These pages cover the nearby markets:

The national Practical NDT overview describes the platform as a whole.

See it on your own Maryland work

A demo is the fastest way to judge fit. Tell us which methods and assets matter to your crew, whether that is cutter thickness surveys, tube inspection or airframe eddy current, and we will walk through the matching jobs, the reports and how records flow into your training files. Request a Practical NDT demo for Maryland. We reply within one business day.

Frequently asked questions

Is there a Practical NDT lab or classroom in Maryland?

No. Practical NDT is delivered online, so a Baltimore shop, a Lusby contractor or a Hagerstown plant uses it in a browser, on a downloaded PC version or in a VR headset at its own location. Atlantis has offices in Houston and Hyderabad.

Can simulator time count toward my SNT-TC-1A experience hours?

That is your employer's decision under its written practice, and most written practices count hours on real inspection work. Treat the simulator as practice that makes those real hours more productive, not as a substitute for them.

Which jobs suit shipyard and harbor work at Curtis Bay or the port?

Start with the merchant vessel and welding workshop jobs: ultrasonic thickness grids on plate, magnetic particle on fillet and groove welds, and visual inspection. The storage tank jobs help anyone working at fuel terminals.

Does it help with eddy current on power plant tubing?

Yes. The heat exchanger workplace includes bobbin coil eddy current and IRIS jobs on tube bundles, which suit technicians preparing for condenser or heat exchanger campaigns during an outage.

Can we run it at a terminal or yard with poor internet?

Download the PC version to a laptop; it runs offline and syncs records when a connection returns. That suits trailers and remote corners of a site.

Do we need special VR hardware?

A standalone headset that supports WebXR is enough, with hand tracking or controllers. Everything in VR is also available in the browser and PC versions, so nobody is locked out without a headset.

Does practising radiography in the simulator qualify me to handle sources?

No. Working with real sources needs licensing, dosimetry and radiation safety training under federal or state rules. The RT jobs teach exposure planning and film interpretation only.

How do we get access for a whole crew?

Ask for a demo through the contact form. Access is set up through the Atlantis client portal, so each technician signs in once and their records stay with their training file.

Cities we serve in Maryland

Every NDT method in one simulator

  • All methods, one simulator: 12 method families: UT, PAUT, TOFD, RT, MT, PT, VT, ET, IRIS, MFL, guided-wave UT and PMI, across 473 jobs and 12 workplaces.
  • Follows the SOP: Every job runs the same twelve-step procedure, from the work order and calibration to the post-check, the training report and the debrief, so trainees build one disciplined habit on every method.
  • Browser, PC or VR: Runs in a browser, on a PC or laptop (offline once downloaded) and in VR on a standalone headset, and connects to the Atlantis LMS and ERP with one sign-in.

Each Practical NDT method and workplace has its own national page: what you practise, what the simulator computes and what it cannot teach. Practical NDT is delivered online, so the same pages apply wherever your team works.

Methods: UT practical simulator · Phased array UT simulator · TOFD simulator · Radiography simulator · Magnetic particle simulator · Penetrant testing simulator · Visual testing simulator · Eddy current simulator

Workplaces: NDT lab · Welding workshop · Process plant · Storage tank · Heat exchanger · Aviation

Practise now: Free ultrasonic A-scan simulator

Speak to an ASNT NDT Level III

Discuss your inspection requirements with Atlantis NDT. Include the asset, method, location and documents you need reviewed.