Inspection Management Software for Gregory
Gregory is a small San Patricio County town that two megaprojects landed on top of within three years. Gulf Coast Growth Ventures, the 50/50 ExxonMobil–SABIC joint venture that ExxonMobil operates, started up in January 2022 with a 1.8 million tonne per year ethane steam cracker described as the world's largest ethane processing unit, two polyethylene units at up to 1.3 million tonnes and a 1.1 million tonne monoethylene glycol unit, with over 600 permanent jobs. On the La Quinta Ship Channel, Cheniere's Corpus Christi Liquefaction site spans over 1,000 acres with ten trains at roughly 25 mtpa, three 160,000 cubic metre containment tanks, two LNG berths and about 1,150 personnel. Bechtel built both.
Gregory is a small San Patricio County town that two megaprojects landed on top of within three years. Gulf Coast Growth Ventures, the 50/50 ExxonMobil–SABIC joint venture that ExxonMobil operates, started up in January 2022 with a 1. An NDT ERP serving this market has to carry the evidence those operators audit against — OSHA PSM 29 CFR 1910.119, ASME V/VIII, API 570, AWS D1.
8 million tonne per year ethane steam cracker described as the world's largest ethane processing unit, two polyethylene units at up to 1.3 million tonnes and a 1.1 million tonne monoethylene glycol unit, with over 600 permanent jobs. On the La Quinta Ship Channel, Cheniere's Corpus Christi Liquefaction site spans over 1,000 acres with ten trains at roughly 25 mtpa, three 160,000 cubic metre containment tanks, two LNG berths and about 1,150 personnel. Bechtel built both. Operators including Gulf Coast Growth Ventures (ExxonMobil–SABIC), Cheniere Corpus Christi Liquefaction, Bechtel (EPC contractor for both sites) set the pre-qualification bar their contractors inherit. The system of record for that evidence is the ERP, not a spreadsheet a technician maintains between jobs.
Source: Per-city industrial and compliance research file; ASNT SNT-TC-1A employer certification framework
| Factor | What applies | Why it matters |
|---|---|---|
| Sectors served | Petrochemicals, Pipeline, Maritime, Manufacturing | Sets which methods, report formats and codes the system must handle |
| Codes audited against | OSHA PSM 29 CFR 1910.119, ASME V/VIII, API 570, AWS D1.1, ASNT SNT-TC-1A | Each demands retrievable evidence, not a claim of compliance |
| What must be retrievable on demand | Technician certification currency · equipment calibration status · the report against the asset that generated it | These three are what an auditor asks for first |
| Deployment | Cloud or on-premise · configured to the codes above · offline field capture | Field crews lose connectivity; the record cannot depend on it |
What must an NDT ERP track for inspection firms in Gregory?
Evidence against OSHA PSM 29 CFR 1910.119, ASME V/VIII, API 570, AWS D1.1, ASNT SNT-TC-1A. That means each technician's certification currency by method and level, each instrument's calibration status on the day it was used, and every inspection report bound to the asset and the job that produced it. An auditor asks for those three before anything else.
Can an inspection company in Gregory run this alongside its existing accounting?
Yes. The ERP owns operations — jobs, technicians, equipment, reports — and pushes finished invoices to the accounting system, which keeps the chart of accounts, tax and reconciliation. For US firms that usually means QuickBooks; the split is documented in the QuickBooks integration guide rather than forcing a migration nobody asked for.
Does it work offline for field crews in Gregory?
Yes. Field capture runs offline and syncs when the device reconnects, because turnaround decks, tank interiors and remote sites have no usable signal and a record that depends on connectivity is a record that gets rewritten from memory hours later. Offline capture is the difference between a contemporaneous record and a reconstruction.
How long does implementation take for a firm in Gregory?
The configuration follows the codes and workflows above rather than a fixed template, so the timeline is set by how much existing data has to be migrated and cleaned — certification records and calibration history are the two that consume the time. Firms usually run the first job cycle in parallel before cutting over.
What happens to inspection records if a technician leaves?
They stay with the asset and the job, which is the point. Employer-based certification ends when the holder leaves, but the reports they signed remain part of the asset's inspection history and are still auditable. A system that stores records per technician rather than per asset loses that history on every departure.
Related: the NDT ERP overview, personnel certification tracking, equipment calibration tracking, QuickBooks integration and the RFP requirements checklist. Firms preparing for an audit should also read the NDT programme gap assessment.
Speak to an ASNT NDT Level III
Atlantis NDT provides ASNT Level III consulting, NDT training to SNT-TC-1A and ISO 9712, inspection management software and independent report validation. Request a free consultation and we will return a tailored quote — affordable, accessible and fully customizable to your programme.