NDT Inspection Management ERP in Casper — Certification, Calibration and Work Orders in One System

Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in Casper, USA. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one Odoo-based platform with 30+ business apps behind it.

Modules inspection companies actually switch for

Certification tracking — SNT-TC-1A / ISO 9712 / NAS 410 currency with automatic dispatch lockout on lapse.
Calibration management — instrument, block and probe calibration intervals with ISO 17025 traceability chains.
Inspection scheduling — API 510/570/653 due dates driven by measured corrosion rate, not a fixed calendar.
Work order management — multi-crew, multi-site dispatch with mobile offline field capture.
Document control — procedures, written practices and technique sheets under ISO 9001 revision control.
Asset management — client asset registers with full inspection history per CML.

Integrations

Runs alongside SAP, Oracle, Maximo, NetSuite, Dynamics 365, QuickBooks and Xero, and connects to the Atlantis Digital Twin platform so inspection results feed the 3D asset model without re-keying.

Frequently Asked Questions

Does Atlantis NDT ERP suit an inspection company based in Casper?

Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with automatic lapse lockout, equipment calibration due-date control, API 510/570/653 inspection scheduling, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for USA are configured during onboarding rather than sold as an add-on module.

How long does implementation take for a mid-size Casper inspection contractor?

A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.

Can it replace the spreadsheets we use for technician certification and equipment calibration?

That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and any expiry blocks assignment to a job automatically. Equipment calibration works the same way — an out-of-calibration flaw detector, thickness gauge or reference block cannot be dispatched. That removes the two failure modes that most often cost inspection firms a client audit.

See it on your own workflow

Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.

Built for any business that runs on operations

Most companies do not fail at their craft. They lose time, margin and goodwill in the gaps between the tools they use to run the place — a quoting spreadsheet that does not talk to the job sheet, a job sheet that does not reach accounts, and a compliance folder nobody can search when a client asks. Atlantis closes those gaps by putting the whole operation on one platform, so information is entered once and everything downstream stays in step.

What you can run on it

Sales and CRM — leads, quotes, follow-ups and the pipeline that tells you what next month looks like.
Projects and job costing — plan the work, track the hours and materials against it, and see the margin while the job is still live rather than at final account.
Field and service teams — dispatch, schedules, mobile capture that works with no signal, and sign-off from site.
Inventory and purchasing — stock, suppliers, reorder points and goods receipt, joined to the jobs that consume them.
People — records, qualifications and licences with renewal reminders, timesheets, leave and payroll.
Quality and documents — procedures and forms under revision control, with the audit trail an inspection or accreditation body actually asks for.
Accounts — invoicing, expenses, multi-currency and the reporting your accountant stops chasing you for.

Affordable, accessible, fully customizable — and we mean each word

Affordable because the whole suite is included rather than sold to you a module at a time, and because implementation is done by people who have run operations rather than by a chain of subcontractors. Accessible because it runs in a browser and on a phone, works for a small team on day one, and does not need a specialist on staff to keep it alive. Fully customizable because your process is the thing that makes you competitive — the software should bend to it, not the other way round.

Industries we configure for

Service businesses and contractors, manufacturing and fabrication, trading and distribution, laboratories and testing houses, engineering consultancies, construction and facilities, and asset owners across energy, marine, aerospace and infrastructure. Inspection and testing is where we started, and it remains the sector we go deepest in — but the platform underneath is general-purpose, and most of what it does has nothing to do with inspection at all.

What happens when you get in touch

A short conversation, not a sales sequence. We ask how the business runs today and where it hurts, show you the platform doing that work, and send a written quote shaped to your region, your team size and the scope you actually need. No obligation, nothing to install first, and no pressure to decide on the call. Reach out and tell us what you are trying to fix.

The Casper NDT services market, from the provider's side

Casper is Wyoming's oil town — refining in town, pipeline systems crossing the state, and the trona, power and wind industries within service range.

Refinery programmes at the local plants, pipeline integrity work along the corridors, and industrial accounts across a service territory measured in hours of windshield time. For the companies doing this work, the operational load concentrates around the refineries on the west side and the pipeline corridors converging on the city — and the back office that keeps crews certified, equipment calibrated and reports moving is what decides which providers grow.

What pipeline inspection work demands from business software

Pipeline integrity work scatters crews across hundreds of miles — dig sites, compressor stations, HDD crossings — and the paperwork has to survive that dispersion. Inspection management software matters most exactly where connectivity is worst: technicians capturing wall-thickness readings and coating assessments in the field need mobile data capture that works offline and syncs when the truck reaches signal, because re-keying handwritten field sheets at the motel is where transcription errors and lost records come from.

Operators audit their inspection contractors against operator-qualification and personnel-certification records, and a finding against the contractor's records is a finding against the contract. Certification tracking that alerts before an OQ or a method cert lapses — not after a technician is already standing on the right-of-way — is the difference between an administrative task and a suspended crew.

What an ERP built for NDT companies covers in Casper

For dispersed field operations like Casper's, the system has to work where the trucks are — Atlantis runs as NDT inspection software with the office functions attached, not the other way round:

Certification and personnel tracking. Every technician's methods, levels, expiry dates, eye-exam currency and Written Practice records under SNT-TC-1A or CP-189 — with the audit view a client's quality department expects, ready before they ask.

Equipment and calibration management. The instrument register with calibration due dates, certificates attached, and traceability that satisfies ISO 17025-minded reviewers — so nothing leaves the shop out of date.

Work order and crew scheduling. Who is qualified, who is available, what the job needs — matched in one view, from a single technician call-out to a full turnaround mobilisation.

NDT reporting. Findings captured once — in the field or the shop, offline if needed — flowing into code-referenced report templates, so the deliverable ships while the competitor is still retyping field sheets. This is the inspection management software layer clients actually see.

Quoting, invoicing and job costing. Hours, equipment and consumables tied to each work order as they happen, so every job shows its true margin and the next bid learns from the last one.

Cloud-based, mobile in the field, and fully customizable to how your operation already works. See the NDT inspection software platform · the full business management suite · talk to us about Casper.

Frequently asked questions

Does Atlantis understand how Casper inspection companies operate?

The platform is built by ASNT Level III practitioners around the workflows above — certification tracking, calibration, field data capture, code-referenced reporting — rather than adapted from generic field-service software. Regional specifics like the client mix around the refineries on the west side and the pipeline corridors converging on the city shape configuration, not custom development.

Can we keep our existing report formats and client requirements?

Yes — report templates, client-specific deliverables and your Written Practice structure are configuration. The system adapts to how you already serve your clients; switching software should never mean renegotiating what your clients receive.

Compare the platform before you shortlist

Most companies arrive at a city page and actually want one of three things. If you are evaluating systems, start with NDT inspection software — what inspection companies actually need. If report turnaround is the pain, go to NDT reporting software compared. If the question is whether a generic system could work, read why generic ERP breaks on inspection work and the NetSuite comparison.

Request a demo or a tailored quote — tell us methods, levels, headcount and timing, and a consultant calls you back prepared.

Also useful: inspection management software for companies inspecting other people's assets, the full business management platform, and the evaluation checklist to run vendors against before you demo anything.

Casper is the refining and service hub for the Powder River Basin and the Wyoming crude gathering network. An NDT ERP serving this market has to carry the evidence those operators audit against — OSHA PSM 29 CFR 1910.119, API 510 / 570 / 653, 49 CFR 195 hazardous liquid pipeline requirements, API 1104 pipeline welding — with technician certification, equipment calibration and inspection records tied to the.

HF Sinclair's Casper refinery processes about 30,000 b/d of sweet Wyoming and Rocky Mountain crude and can also run domestic and Canadian synthetic, with roughly 150 permanent staff and about 25 contractors day to day, punctuated by very large capital overhauls — a $200 million rebuild hired hundreds of turnaround workers. Casper-headquartered True Companies runs the Bridger and Belle Fourche crude pipelines out of the basin. Westech/Wotco has built heavy oilfield and mining equipment here since 1938, and Wyoming Machinery rebuilds Caterpillar mining and drilling iron. The metro carries about 1,480 manufacturing jobs. Operators including Sinclair Casper Refining Company (HF Sinclair), True Companies / Bridger Pipeline and Belle Fourche Pipeline, Westech/Wotco Inc. set the pre-qualification bar their contractors inherit. The system of record for that evidence is the ERP, not a spreadsheet a technician maintains between jobs.

Source: Per-city industrial and compliance research file; ASNT SNT-TC-1A employer certification framework

NDT ERP in Casper — what the system has to evidence
Factor	What applies	Why it matters
Sectors served	Petroleum refining and asphalt, Crude oil gathering, storage and pipelines, Oilfield and mining equipment manufacturing, Heavy equipment dealer service and rebuild, Powder River Basin field services	Sets which methods, report formats and codes the system must handle
Codes audited against	OSHA PSM 29 CFR 1910.119, API 510 / 570 / 653, 49 CFR 195 hazardous liquid pipeline requirements, API 1104 pipeline welding, NBIC NB-23, MSHA 30 CFR Part 56 surface mining equipment standards	Each demands retrievable evidence, not a claim of compliance
What must be retrievable on demand	Technician certification currency · equipment calibration status · the report against the asset that generated it	These three are what an auditor asks for first
Deployment	Cloud or on-premise · configured to the codes above · offline field capture	Field crews lose connectivity; the record cannot depend on it

What must an NDT ERP track for inspection firms in Casper?

Evidence against OSHA PSM 29 CFR 1910.119, API 510 / 570 / 653, 49 CFR 195 hazardous liquid pipeline requirements, API 1104 pipeline welding, NBIC NB-23. That means each technician's certification currency by method and level, each instrument's calibration status on the day it was used, and every inspection report bound to the asset and the job that produced it. An auditor asks for those three before anything else.

Can an inspection company in Casper run this alongside its existing accounting?

Yes. The ERP owns operations — jobs, technicians, equipment, reports — and pushes finished invoices to the accounting system, which keeps the chart of accounts, tax and reconciliation. For US firms that usually means QuickBooks; the split is documented in the QuickBooks integration guide rather than forcing a migration nobody asked for.

Does it work offline for field crews in Casper?

Yes. Field capture runs offline and syncs when the device reconnects, because turnaround decks, tank interiors and remote sites have no usable signal and a record that depends on connectivity is a record that gets rewritten from memory hours later. Offline capture is the difference between a contemporaneous record and a reconstruction.

How long does implementation take for a firm in Casper?

The configuration follows the codes and workflows above rather than a fixed template, so the timeline is set by how much existing data has to be migrated and cleaned — certification records and calibration history are the two that consume the time. Firms usually run the first job cycle in parallel before cutting over.

What happens to inspection records if a technician leaves?

They stay with the asset and the job, which is the point. Employer-based certification ends when the holder leaves, but the reports they signed remain part of the asset's inspection history and are still auditable. A system that stores records per technician rather than per asset loses that history on every departure.