Magnetic Particle Inspection (MT) in Chicago, Illinois
Atlantis NDT sends magnetic particle technicians to Chicago-area refineries, mills, rail shops and fabricators to find surface and near-surface cracks in carbon and low-alloy steel. Typical jobs are repair and attachment welds, crane hooks and lifting lugs, axle and wheel components, and structural joints. Request an MT quote for your Chicago site with the part list and code, and we reply within one business day.
Where magnetic particle inspection is used in Chicago
Few cities hold as much heavy steel in motion as Chicago. Freight railroads converge here, so wheelsets, axles, couplers and bogie frames pass through overhaul shops, and fatigue cracking in those parts is exactly what magnetic particle testing is good at finding. The steel industry along the southern lakeshore, on both sides of the Illinois-Indiana line, relies on cranes that pour and move ladles, so hooks, trunnions, sheave pins and crane rail attachments are examined on a maintenance cycle. Refineries at Whiting, Joliet and Lemont bring pressure vessels, nozzles, skirts and tank shell attachments into scope, especially during turnarounds when equipment is open and the surface is clean.
Chicago's bridges add another class of work. The city's trunnion bascule leaves carry machinery, trunnion shafts and welded steel connections that live under repeated load, and steel bridges throughout the region need crack checks at repaired details. West of the city, Rockford-area shops make gears, shafts and landing-gear style components where grinding and heat-treatment cracks are the concern, and fabricators across the metro build structural steel and pressure parts that need in-process weld checks while rework is still easy.
- Refinery vessel and piping welds, nozzle and support attachment welds, tank shell attachments
- Mill and crane components: hooks, trunnions, couplings, roll necks, sheave pins
- Rail and transit parts: axles, wheels, couplers, bogie and truck frames
- Bridge and structural steel: fillet and groove welds, repaired details, lifting lugs
What MT detects, and what it cannot
Magnetic particle testing works only on ferromagnetic material: carbon steel, low-alloy steel and martensitic grades. The inspector magnetizes the part, applies fine iron particles, and any discontinuity that interrupts the magnetic field pulls particles into a visible line. It finds surface-breaking cracks, laps and seams, and some flaws just under the surface. It does not work on austenitic stainless steel, aluminum or copper alloys, which do not hold a useful field, and it does not see deep internal flaws.
Field direction matters. A crack shows best when it crosses the lines of magnetic flux at a right angle, so the code requires two examinations with the field turned roughly ninety degrees between them. A single pass can miss a crack that happens to run parallel to the field. Surface condition matters too: heavy scale, weld spatter and thick coatings reduce sensitivity, and the part has to be dry and free of oil. Where MT does not apply, penetrant testing handles non-magnetic metals and ultrasonic testing handles internal and wall-loss questions.
Codes and acceptance criteria that apply in Chicago
The technique comes from ASME Section V Article 7, supported by ASTM E709 as a guide and ASTM E1444 as the practice. Acceptance is set by the construction or repair code. ASME Section VIII Division 1 Appendix 6 covers vessels, ASME B31.3 paragraph 344.3 covers process piping, and AWS D1.1 covers structural steel welds, with AWS D1.5 for state bridge work. In each case the numbers of acceptable indications and their size limits come from that code, not from the technician.
Illinois controls repairs to registered equipment through the National Board Inspection Code. A licensed repair organization files a repair or alteration form after the work, and used or relocated equipment needs a certificate inspection before it returns to service. Magnetic particle examination of the excavation and the finished weld is part of the record behind those forms. Inside the city limits the Chicago Department of Buildings Boiler Inspection Bureau, not the state, is the inspecting authority for boilers and unfired pressure vessels, so repair records are confirmed with the right office before work begins. For the state's own rules see the Office of the State Fire Marshal boiler and pressure vessel page, and for background on repairs see the National Board. A refinery owner also has process safety obligations under OSHA 29 CFR 1910.119(j), which expects mechanical integrity work to follow good engineering practice. Our explainer on Article 7 requirements sets out the technique rules in plain terms.
How the examination is performed
For field welds the usual tool is an electromagnetic yoke. An alternating-current yoke must show a lifting power of at least 10 pounds at the pole spacing used, and a direct-current or permanent-magnet yoke at least 40 pounds, and the technician checks that lift before use with a standard weight. The yoke is placed across the weld, particles are applied while the field is on, and the area is examined; then the yoke is turned about ninety degrees and the pass is repeated. Prods are kept off finished pressure-retaining surfaces because an arc strike is itself a rejectable condition.
Where sensitivity matters, such as hydrogen-service vessels or fatigue-critical parts, wet fluorescent particles are used. These need a darkened viewing area and a UV-A lamp whose intensity is checked, and the particles are suspended in a carrier fluid whose concentration is measured. Visible dry powder is easier outdoors on rough welds. A field indicator or shim shows that the setup is giving a usable field. If residual magnetism could interfere with later welding, machining or a sensitive instrument, the part is demagnetized and checked afterward. Thin non-magnetic coatings can be examined through only up to the limit the procedure demonstrates; thicker paint means removal back to metal or a qualification on a coated piece, and that choice should be agreed before the crew arrives.
Common MT findings and what happens next
On Chicago structural and rail steel the usual finds are fatigue cracks starting at weld toes and sharp changes of section, crater cracks at the end of a pass, and lack-of-fusion openings that reach the surface along a fillet. On heat-treated shafts and gears the finds are grinding checks and quench cracks, which show as fine networks. Indications that are rounded and small are often non-relevant, caused by a change of section or a magnetic writing effect, and the technician re-examines them after light cleaning to decide whether they are real. A confirmed linear indication is marked, measured and reported, and the owner or engineer decides whether to grind it out, weld repair it or remove the part. Atlantis does not decide the repair; after a repair the same examination is repeated to prove the crack is gone, and that second report goes into the same file.
It helps to have the drawing, the weld map and the previous report on hand when the technician arrives. A known cracked location or a past repair tells the technician where to look hardest, and it lets the report say whether an indication is new or has changed since the last campaign.
Who performs the work
Technicians are qualified under the Atlantis written practice, which is built on ASNT SNT-TC-1A. A Level II technician sets up the equipment, performs the examination and interprets the indications. The magnetic particle procedure is approved, and each report reviewed, by Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT. Atlantis has no office in Chicago. Crews are mobilized to your site with the yokes, lamps, particles and calibration items the procedure calls for, and we confirm the travel and orientation requirements at the quoting stage. Atlantis is certified to ISO 9001 and ISO 14001. If a customer specification requires a particular qualification beyond the written practice, tell us up front and we will say what is realistic.
What an MT report contains
The report names the component and its location, the procedure and revision, the equipment and its calibration or lift check, the particles and carrier, the surface condition, the lighting measurements for fluorescent work, and the technician and level. Each reportable indication is located and sized on a sketch, with a note on whether it relieved on re-examination after light grinding. The disposition states accept or reject against the code criteria you named. An ASNT Level III reviews it before issue. If your repair file needs a specific form or a photograph log, send the template with your inquiry so the report matches your record.
Planning an MT job in Chicago
Chicago climate is a real planning factor. Winter days can be far below freezing, and cold particles, cold carrier fluid and stiff hands all reduce sensitivity; the procedure should state the allowed surface temperature, and the crew may need to warm the work area or the part. Summer heat on a refinery structure can make hot surfaces unsafe for wet methods and calls for dry powder. Humidity and rain stop outdoor work. Plants in the Calumet region, the Joliet corridor and the steel district run badge and safety orientation processes, and turnaround schedules are fixed months ahead, so the useful time to call is during scoping. Rail yards need track protection and bridges need lane or waterway closures arranged by the owner. Tell us the realities of your site and we will build the schedule around them.
MT, PT or UT for your Chicago job
A short scoping call usually settles it. Tell us the material grade, the surface condition and what failure you are worried about, and we will say which method answers it, and whether a second method should be on the same visit to save a return trip to the site.
The material and the question decide it. On carbon steel welds where you want surface cracks, MT is fast and sensitive. On stainless, aluminum or alloy parts where MT cannot be used, choose penetrant testing in Chicago. When the question is remaining wall or a flaw below the surface, choose ultrasonic testing in Chicago. Our national magnetic particle testing page and the complete MT guide cover the service and the theory, and the MT versus PT comparison helps if you are deciding between the two on a mixed-material job.
Training your own MT technicians
If you want in-house capability, Atlantis offers MT Level 1 training and MT Level 2 training, and the wider magnetic particle testing training page explains how the course and practical fit your written practice. Chicago employers can read about NDT training in Chicago, and statewide inspection coverage is on the Illinois inspection services page. For written practice work, see written practice development.
Frequently asked questions
What materials can magnetic particle inspection be used on?
Only ferromagnetic materials such as carbon steel, low-alloy steel and martensitic stainless grades. Austenitic stainless steel, aluminum and copper alloys do not carry a usable magnetic field, so those parts need penetrant testing instead.
Do you have a lab or office in Chicago?
No. Atlantis has no office in Chicago. Technicians are mobilized to your site with the yokes, lamps and particles the procedure needs, and we confirm travel and site orientation details when we quote.
Why does the examination need two directions?
A crack shows best when it crosses the magnetic field, so ASME Section V Article 7 requires two examinations with the field turned roughly ninety degrees between them. A single pass can miss a crack that runs parallel to the field.
Can you inspect through paint?
Only through a thin non-magnetic coating, and only up to the thickness the written procedure has demonstrated. Heavier paint has to be removed or the procedure qualified on a coated sample, which we agree before the crew mobilizes.
When is wet fluorescent MT chosen over dry powder?
Wet fluorescent particles under UV-A light are chosen when sensitivity matters, for example on hydrogen-service vessels or fatigue-critical parts. Visible dry powder suits rough outdoor welds where a darkened viewing area is impractical.
Which code sets the acceptance criteria?
The code that built or governs the item: ASME Section VIII Division 1 Appendix 6 for vessels, B31.3 for process piping, AWS D1.1 for structural steel or AWS D1.5 for bridges. The owner or engineer names it before the job.
Is demagnetization included?
It is done when residual magnetism could affect later welding, machining or sensitive equipment, and the report records it. Tell us if the part goes back into service or on to another process so we can plan it.
Who approves the MT procedure and reviews the report?
An ASNT NDT Level III approves the procedure and reviews each report. Level II technicians qualified under the Atlantis written practice, based on ASNT SNT-TC-1A, perform the examination and interpret the indications.
Inspection and training around Chicago
- Ultrasonic testing (UT) in Chicago
- Liquid penetrant testing (PT) in Chicago
- Magnetic particle inspection services
- NDT inspection services in Illinois
MT by industry for Chicago: Petrochemical · Power Generation · Fabrication & Welding · Steel & Primary Metals · Rail.
MT by job: Magnetic particle weld inspection · Magnetic particle inspection of lifting equipment · Magnetic particle inspection of castings and forgings · Magnetic particle inspection of structural steel and bridges.
Training your own technicians: MT Level 1 training · MT Level 2 training · NDT training for Chicago technicians.
Request an MT inspection quote for Chicago
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for magnetic particle inspection in Chicago.
Need magnetic particle testing (MT) done, or learned?
Atlantis provides magnetic particle testing (MT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.