Radiographic Testing in Steel & Primary Metals: What It Finds, What It Misses, and What Governs It

What RT is actually used for in steel & primary metals

Heavy fabrication attached to steelworks — ladles, furnace shells, structural rebuilds — draws radiography for coded welds.

How RT works

Radiography passes X-rays or gamma radiation through the component onto film or a digital detector. Density differences in the image reveal what the material contains — porosity, slag, lack of fusion, and the internal geometry of a weld — producing the one thing no other method gives: a permanent, reviewable image of the volume examined.

What RT will not do

What RT will not do reliably: find tight planar defects lying perpendicular to the beam, because a crack with no measurable width casts almost no shadow. It also requires access to both sides, controlled radiation areas that shut down surrounding work, and licensed sources — which is why RT is scheduled around the plant rather than the plant around RT.

The steel & primary metals assets this applies to

Continuous casters, rolling mills and their rolls, furnace shells and ducting, cranes, and the plate, bar and tube the mill produces.

The damage mechanisms driving the examination

Product soundness — laminations, inclusions and surface defects — alongside plant-side thermal fatigue, wear, and structural fatigue in heavily loaded cranes and mill housings.

What governs acceptance

Product examination runs to ASTM and customer specifications, often inline and automated; plant maintenance examination runs to ASME and jurisdictional requirements. On the method side: ASME Section V Articles 2 and 22 for technique; ASME Section VIII and B31.3 for acceptance; API 1104 for pipeline girth welds; ISO 17636 in international scopes. An examination that is technically sound but performed outside the governing regime is not an examination anyone will accept, which is why the code family matters as much as the technique.

How Atlantis delivers RT in this sector

Atlantis mobilises examination teams to your site under Atlantis procedures with ASNT Level III oversight — we do not claim a depot or laboratory in every market, and say so plainly. What you receive is the examination performed to a qualified procedure, findings evaluated against the acceptance criteria your contract names, and records structured to survive a client audit years later.

In the United States, Atlantis does not perform radiography: industrial radiography there is licensed under NRC rules (10 CFR Part 34) or the equivalent Agreement State rules. On US projects we offer ultrasonic testing where the code and the owner allow it, and ASNT Level III review of radiographs and RT procedures.

Radiographic Testing services · RT training and certification · Steel & Primary Metals NDT training · scope a RT examination.

RT in other sectors

Refining · Petrochemical · LNG · Offshore · Pipeline · Marine & Shipbuilding.

Other methods in steel & primary metals

UT · MT · PT · VT · ET.

What Atlantis provides in Steel is set out in full on the radiographic testing services page — film and digital radiography with the source logistics, exclusion zones and permanent image records a contract requires.

Need radiographic testing (RT) done, or learned?

Atlantis provides radiographic testing (RT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.

Speak to an ASNT NDT Level III

Discuss your inspection requirements with Atlantis NDT. Include the asset, method, location and documents you need reviewed.