Radiographic Testing (RT) in Chicago: What Atlantis Offers Instead

Atlantis does not carry out radiographic testing anywhere in the United States. If you searched for radiography in Chicago, this page explains why, and what we can do for a weld or casting scope: ultrasonic examination where your code allows it, and independent ASNT Level III review of radiographs made by a licensed contractor. Tell us about the Chicago scope and we reply within one business day.

Why Atlantis does not perform radiography in the United States

Industrial radiography uses sealed gamma sources or X-ray equipment, and in the United States it is a licensed activity. The Nuclear Regulatory Commission sets the rules in 10 CFR Part 34, and Agreement States such as Illinois run equivalent programs; in Illinois the Illinois Emergency Management Agency licenses radioactive materials. A company needs the license, trained and certified radiographers, source security and exposure-control procedures before it can legally expose a weld. Atlantis does not offer that service here and does not claim to. We would rather say so plainly than let a Chicago buyer assume otherwise.

Ultrasonic testing as the volumetric alternative in Chicago

For many weld scopes the question behind a radiography request is whether the weld has internal flaws. Ultrasonic testing answers it without a radiation exclusion zone, which is attractive in occupied Chicago plants and at busy refineries where clearing an area for exposure stops other trades. ASME B31.3 and API 1104 contain provisions for ultrasonic examination of production welds, AWS D1.1 has its own acceptance criteria for groove welds examined by UT, and ASME Section VIII Division 1 permits UT in place of radiography only under specific conditions.

That substitution is not ours to decide alone. It has to be agreed with the owner, the engineer of record and, for code work, the authorized inspector before the job, and recorded in the examination plan. When it is agreed, ultrasonic testing in Chicago from Atlantis covers shear-wave weld examination to a written procedure, with the reference level and indication log in the report. Other Chicago scopes may be better served by magnetic particle or penetrant surface examination.

ASNT Level III radiography review without a radiation license

Reviewing an image does not involve a source, so it needs no radiation license. The review service covers an independent read of radiographs, film or digital, and their technique sheets against ASME Section V Article 2 and the construction code. It includes a second read on disputed indications, a check of image quality indicators and density or contrast against the requirement, and review of an RT contractor's procedure and written practice. The review is carried out under the direction of Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT. Images stay with the contractor who made them; we review what you send and report our findings to you.

This is useful on Chicago projects where an owner or general contractor wants a second pair of expert eyes on radiography they did not witness, or where an acceptance decision is contested. It does not replace the contractor's own Level II interpretation. For help setting expectations with a radiography subcontractor, see outsourced Level III consulting.

Radiography training and your written practice

If your Chicago team needs to understand radiography, Atlantis teaches the theory side through the radiographic testing Level 2 course. Radiographic work on real sources still requires a licensed program run by the employer. We can also help you write or review the radiography portion of your SNT-TC-1A written practice, which is covered under written practice development. Chicago employers can read about NDT training in Chicago, and statewide inspection services are on the Illinois inspection services page.

Frequently asked questions

Is radiographic testing available from Atlantis in Chicago?

No. Atlantis does not perform radiographic testing anywhere in the United States, because industrial radiography is licensed under NRC rules and Agreement State programs such as the one in Illinois. Ultrasonic testing and Level III radiograph review are available from Atlantis instead.

Can ultrasonic testing replace radiography on my welds?

Sometimes. ASME B31.3, API 1104 and AWS D1.1 contain ultrasonic provisions, and ASME Section VIII allows UT in place of RT under specific conditions. The substitution must be agreed with the owner, engineer and authorized inspector first.

Can you review radiographs from another contractor?

Yes. An ASNT Level III reviews film or digital images and technique sheets against ASME Section V Article 2 and the construction code, and gives a second read on disputed indications. The images stay with the contractor.

Do you recommend a radiography contractor in Chicago?

No. We do not name or recommend radiography contractors. We can review the contractor procedure and the images afterward, so your acceptance decision rests on an independent technical opinion.

Where can my team learn radiography theory?

A radiographic testing Level 2 course covering theory is available from Atlantis. Practical work with sources must be done under a licensed program, and your written practice under SNT-TC-1A defines who is qualified in your company.

Inspection and training around Chicago

Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Chicago technicians.

Need a weld examined in Chicago?

Send the drawing or weld list, the material and thickness, and the code you work to. We will tell you whether ultrasonic testing can be used in place of radiography for that work, or quote a Level III review of radiographs you already have. Ask about UT or a radiograph review for Chicago.