Inspection Management Software for Astoria
Astoria's base is seafood and small-vessel marine work, plus one large paper mill just upriver. Bornstein Seafoods has moved its headquarters to Astoria and runs about 150 year-round staff and up to 300 in season; Da Yang Seafood processes here as well, and their joint venture with Scoular opened a $17.5 million fishmeal plant at the Port of Astoria's Warrenton airport industrial park in 2023. At Tongue Point, Hyak Maritime's shipyard hosts WCT Marine & Construction and Bergerson Construction, though tenants sued in 2026 and the yard's electric travel lift has seen almost no use. Hampton Lumber's Warrenton mill employs about 140 and chips to Georgia-Pacific's Wauna mill at Clatskanie, which runs five tissue machines and roughly 850 workers.
Astoria's base is seafood and small-vessel marine work, plus one large paper mill just upriver. An NDT ERP serving this market has to carry the evidence those operators audit against — USCG 46 CFR Subchapter C uninspected commercial fishing vessel requirements, ABS Rules for Building and Classing Marine Vessels, AWS D1.1 structural welding, ASME Section VIII Div.
Bornstein Seafoods has moved its headquarters to Astoria and runs about 150 year-round staff and up to 300 in season; Da Yang Seafood processes here as well, and their joint venture with Scoular opened a $17.5 million fishmeal plant at the Port of Astoria's Warrenton airport industrial park in 2023. At Tongue Point, Hyak Maritime's shipyard hosts WCT Marine & Construction and Bergerson Construction, though tenants sued in 2026 and the yard's electric travel lift has seen almost no use. Hampton Lumber's Warrenton mill employs about 140 and chips to Georgia-Pacific's Wauna mill at Clatskanie, which runs five tissue machines and roughly 850 workers. Operators including Bornstein Seafoods, Da Yang Seafood, Hyak Maritime Tongue Point / WCT Marine & Construction set the pre-qualification bar their contractors inherit. The system of record for that evidence is the ERP, not a spreadsheet a technician maintains between jobs.
Source: Per-city industrial and compliance research file; ASNT SNT-TC-1A employer certification framework
| Factor | What applies | Why it matters |
|---|---|---|
| Sectors served | Fishing, Maritime, Forest Products, Shipbuilding | Sets which methods, report formats and codes the system must handle |
| Codes audited against | USCG 46 CFR Subchapter C uninspected commercial fishing vessel requirements, ABS Rules for Building and Classing Marine Vessels, AWS D1.1 structural welding, ASME Section VIII Div. 1, OAR 918-225 Oregon boiler and pressure vessel rules, ASNT SNT-TC-1A | Each demands retrievable evidence, not a claim of compliance |
| What must be retrievable on demand | Technician certification currency · equipment calibration status · the report against the asset that generated it | These three are what an auditor asks for first |
| Deployment | Cloud or on-premise · configured to the codes above · offline field capture | Field crews lose connectivity; the record cannot depend on it |
What must an NDT ERP track for inspection firms in Astoria?
Evidence against USCG 46 CFR Subchapter C uninspected commercial fishing vessel requirements, ABS Rules for Building and Classing Marine Vessels, AWS D1.1 structural welding, ASME Section VIII Div. 1, OAR 918-225 Oregon boiler and pressure vessel rules. That means each technician's certification currency by method and level, each instrument's calibration status on the day it was used, and every inspection report bound to the asset and the job that produced it. An auditor asks for those three before anything else.
Can an inspection company in Astoria run this alongside its existing accounting?
Yes. The ERP owns operations — jobs, technicians, equipment, reports — and pushes finished invoices to the accounting system, which keeps the chart of accounts, tax and reconciliation. For US firms that usually means QuickBooks; the split is documented in the QuickBooks integration guide rather than forcing a migration nobody asked for.
Does it work offline for field crews in Astoria?
Yes. Field capture runs offline and syncs when the device reconnects, because turnaround decks, tank interiors and remote sites have no usable signal and a record that depends on connectivity is a record that gets rewritten from memory hours later. Offline capture is the difference between a contemporaneous record and a reconstruction.
How long does implementation take for a firm in Astoria?
The configuration follows the codes and workflows above rather than a fixed template, so the timeline is set by how much existing data has to be migrated and cleaned — certification records and calibration history are the two that consume the time. Firms usually run the first job cycle in parallel before cutting over.
What happens to inspection records if a technician leaves?
They stay with the asset and the job, which is the point. Employer-based certification ends when the holder leaves, but the reports they signed remain part of the asset's inspection history and are still auditable. A system that stores records per technician rather than per asset loses that history on every departure.
Related: the NDT ERP overview, personnel certification tracking, equipment calibration tracking, QuickBooks integration and the RFP requirements checklist. Firms preparing for an audit should also read the NDT programme gap assessment.
Speak to an ASNT NDT Level III
Atlantis NDT provides ASNT Level III consulting, NDT training to SNT-TC-1A and ISO 9712, inspection management software and independent report validation. Request a free consultation and we will return a tailored quote — affordable, accessible and fully customizable to your programme.