Magnetic Particle Inspection (MT) in Indianapolis, Indiana
Atlantis NDT mobilizes magnetic particle inspectors to Indianapolis plants, foundries, forge shops, fabricators and equipment yards, and to other Indiana sites, to find surface and near-surface cracks in carbon and low-alloy steel and in iron castings. Common scopes are crankshafts, gears and shafts, forgings, steel and ductile iron castings, welded frames and lifting equipment. Request an MT quote for your Indianapolis work, with the parts, material and acceptance code, and we answer within one business day.
Where magnetic particle inspection is used in Indianapolis and Indiana
Indiana makes things from steel. Indianapolis grew around foundries and machine shops, then around automobile and engine manufacturing, and the region today still produces engines, transmissions, axles, drive components and heavy equipment. Rolls-Royce builds defense engines in the city, and truck and automotive suppliers machine shafts, gears and housings nearby. Mills and service centers across the state, including the steel works in the northwest corner, feed a long chain of forges, foundries and fabricators.
Those parts are ideal for magnetic particle inspection. A crankshaft journal, a gear tooth root or a forged flange fails by fatigue cracking that starts at the surface, and MPI is the method that finds it. A welded frame for a truck, a crane or a piece of mobile equipment needs its welds checked for toe cracks and lack of fusion. Cast ductile iron and cast steel components show shrinkage, laps and surface cracks under particles.
- Engine and drivetrain parts: crankshafts, connecting rods, camshafts, gears, axle shafts and couplings
- Forgings and castings: flanges, hubs, housings, yokes, steel and ductile iron castings
- Welded frames and structures: truck and trailer frames, crane booms, equipment bases, bridge and building steel
- Lifting and rigging: hooks, lugs, pins, shackles and below-the-hook attachments
The same work is available statewide through our NDT inspection services in Indiana page, and customers searching for magnetic particle inspection in Indiana often have sites outside Indianapolis as well.
What MT finds, and what it cannot
Magnetic particle testing works only on ferromagnetic material: carbon and low-alloy steels, martensitic stainless steels and cast iron. The part is magnetized, iron particles are applied, and a surface or near-surface crack that interrupts the field attracts them into a visible line. The method is quick, inexpensive in materials and very good at tight fatigue cracks and grinding cracks.
It does not work on austenitic stainless steel, aluminum, copper alloys or titanium, which are not magnetic. It cannot measure crack depth. Deep internal flaws are beyond its reach, and thick coatings or plating reduce sensitivity. Aluminum transmission housings, a common Indianapolis product, are therefore a penetrant job rather than a magnetic particle one.
Choosing the technique
The procedure states how the part is magnetized and what particles are used. A yoke is the usual field tool for welds and large parts, prods or cables suit heavy sections, and coils or central conductors suit shafts and rings that can be placed on the equipment. A customer's wet horizontal bench is used when one is available at the plant and the procedure specifies it, since the bench gives uniform circular and longitudinal fields on small parts. AC magnetization favors surface flaws, and DC or half-wave current reaches deeper.
Wet fluorescent particles examined under UV-A light in a dark area give the highest sensitivity, and they are the normal choice for critical machined parts. Wet visible particles on contrast paint work in daylight. Dry powder suits rough or warm surfaces. ASME Section V Article 7 requires that an AC yoke lift at least 10 pounds, and a DC or permanent-magnet yoke at least 40 pounds, at the maximum pole spacing in use. Two examinations at roughly right angles ensure that cracks in any direction are found.
Codes and acceptance criteria
The method comes from ASME Section V Article 7, ASTM E1444 and the guide in ASTM E709. Acceptance is taken from the code that governs the item: ASME Section VIII Division 1 Appendix 6 for vessels, ASME B31.3 paragraph 344.3 for process piping, B31.1 for power piping, AWS D1.1 for structural steel and AWS D1.5 for bridge steel, or a customer specification for machined components. In-service pressure equipment under API 510, API 570 or API 653 is the responsibility of the owner's authorized inspector, and Atlantis carries out the MT and reports the indications. The contract states which edition applies.
Indiana rules that touch MT work
The Indiana Department of Homeland Security regulates boilers and pressure vessels under 675 IAC 30, with operating permits and Indiana-licensed inspectors. MT on a repair weld becomes part of the record the inspector reviews. The state operates its own workplace safety plan through the Indiana Department of Labor, so rules on crane inspections, lockout, confined spaces and electrical hazards around magnetizing equipment are enforced by the state. Bridge steel on public work in Indiana falls under the Indiana Department of Transportation and its specifications, which build on the AWS bridge welding code.
Lifting equipment and magnets
Some customers search for a magnet inspection service when what they own is a lifting magnet. Inspection of lifting magnets is governed by ASME B30.20 and belongs to the owner's designated person. It is different from MT. Magnetic particle testing is used on the hook, lug, pin and structure of a lifting device, for example during the inspections ASME B30.10 calls for on hooks. Atlantis performs MT; it does not rate or approve lifting equipment.
Surface preparation and reading indications
Parts are cleaned of oil, scale, paint and metal spatter before testing. Machined surfaces are usually ready as they come; as-welded or as-cast surfaces may need local grinding or blasting so that particles can move freely. The technician separates relevant indications, which come from discontinuities, from non-relevant ones, such as magnetic writing, sharp section changes or gear tooth profiles. A suspected crack is re-examined after conditioning. Linear indications, with length more than three times width, are measured and compared with the acceptance table, and rounded indications are judged separately.
Examining machined parts and shafts
For crankshafts, gear blanks, rings and other machined parts, the strongest set-up is a wet horizontal bench with circular and longitudinal magnetization, and where a plant owns one, the procedure can specify it. Without a bench, a portable coil or yoke is used. Journals, keyways, fillets and gear roots get special attention since fatigue starts at stress raisers. The procedure states the current, the number of shots, and the dwell time of the bath, and it sets the particle concentration, which is checked with a centrifuge tube before use. Parts that are ground after heat treatment are especially prone to grinding cracks, which appear as a fine network or as parallel lines at right angles to the grinding direction.
Heavy equipment, welded frames and lifting gear
Welded frames, booms and bases on trucks, cranes and mobile equipment concentrate stress at weld toes and at the ends of gussets, and those are the places inspectors look first. Indianapolis maintenance shops and fabricators that build or repair such structures use MT to check fit-up root passes, completed welds and weld repairs. Pins, lugs and hooks on lifting equipment are examined for cracks at the load-bearing surfaces. The inspector records each location against a sketch or photograph so that the repairs can be checked off after rework and the area re-examined.
Equipment checks and field safety
Before a job, the yoke is checked with a calibrated lifting weight, the UV and white light meters are confirmed to be in date, and bath concentration is tested. Cables, plugs and ground-fault protection are inspected. Prods are energized only after contact is made, since arcing burns the work surface and can create new cracks. At heights, in confined spaces and around live equipment, the site safety plan governs, and technicians take the plant's orientation before starting work.
Who does the work
MT is carried out by Level II technicians qualified under the company's written practice, which follows ASNT SNT-TC-1A. An ASNT Level III approves the procedure and reviews records, and Anoop Rayavarapu holds ASNT NDT Level III in UT, RT, MT, PT and VT. Under SNT-TC-1A the employer issues the qualification. Atlantis holds ISO 9001 and ISO 14001 certification.
What the MT report contains
A report lists the component, drawing and location, the procedure and revision, the equipment and its calibration status, the yoke lift check, particle type and concentration, UV intensity and ambient light level for fluorescent work, surface condition, and technician and level. Every indication is recorded with location, length and orientation, accepted or rejected against the named code, and photographed where possible. If demagnetization is required, the report records the residual field check afterward, because magnetism left in a crankshaft or gear can attract chips into bearings.
Planning an MT job in Indianapolis
Technicians travel to your site with portable equipment. Indianapolis winters are cold enough that wet particle suspensions thicken and parts arrive from outdoor storage coated in frost, so work areas need to be heated or the parts brought inside; the carrier fluid and surface must be checked against the procedure temperature. Summer humidity and heat shorten drying times and degrade dry powder. Fluorescent work needs a dark area, which in a busy plant means a booth or a tent. Plant shutdowns and tooling changeovers are scheduled early, so book dates when you plan the outage. We have no office in Indianapolis; the quote reflects travel and orientation time.
Indianapolis also sees sudden weather swings in spring and fall. A warm afternoon can follow a freezing night, and condensation forms on cold steel as it warms, so parts are wiped dry and checked for moisture before particles go on. Dry powder in particular clumps when damp, and wet baths cool and thicken when left outside, which is why the technician measures bath temperature and condition at the start of every shift and again after any long break.
MT, PT or UT for your Indianapolis job
For steel and iron parts, MT is generally the faster and more sensitive way to find surface cracks. Choose dye penetrant inspection in Indianapolis for aluminum housings, stainless steel and other non-magnetic material, and ultrasonic testing in Indianapolis when thickness or internal weld condition matters. Our guides on magnetic particle testing, MT versus PT and Article 7 requirements go into more detail, and the national magnetic particle testing page covers the service.
Training your own MT technicians
Plants that would rather build in-house capability can begin with MT Level 1 training and MT Level 2 training, and see the Indianapolis NDT training page for local details. Your company certifies its own technicians under its written practice.
Frequently asked questions
What parts can magnetic particle inspection check in Indiana?
Any ferromagnetic part: crankshafts, gears, shafts, forgings, steel and ductile iron castings, welded frames, hooks and lugs. It finds surface and near-surface cracks that fatigue or welding can create.
Does Atlantis have an office in Indianapolis for MPI?
No. Atlantis has no office in Indianapolis. Qualified Level II technicians travel to your plant or yard with portable equipment, and an ASNT Level III approves the procedure and reviews the results.
Can MT inspect aluminum transmission housings?
No, aluminum is not ferromagnetic. Liquid penetrant testing is the surface method for aluminum, and the Indianapolis penetrant page explains how it works for housings and other non-magnetic parts.
Is wet fluorescent MT better than dry powder?
Fluorescent particles under UV-A light are the most sensitive and suit machined parts, but they need darkness. Dry powder suits rough, warm or outdoor welds. The procedure explains the selection.
Why does the part need two examinations?
Cracks show best when they cross the field. By magnetizing in two directions about ninety degrees apart, a crack in any orientation is found, as ASME Section V Article 7 requires.
Does magnetism left in a part cause problems?
It can. Residual magnetism can deflect a welding arc, attract chips into bearings or upset instruments, so the procedure states when demagnetization is required and how the residual field will be verified.
Is a magnet inspection service the same as MT?
No. Inspection of lifting magnets is covered by ASME B30.20 and belongs to the owner. MT is a crack-detection method used on hooks, pins, lugs and structures of lifting devices.
What do I need to send for a quote?
Send the part list or drawings, material, surface and coating condition, the acceptance code and edition, power and access details, and your target dates. Photographs of the weld areas help.
Can Atlantis teach MT to my staff?
Yes. Atlantis offers MT Level 1 and Level 2 training, and your company certifies its technicians under its own SNT-TC-1A written practice, since the employer issues the qualification.
Inspection and training around Indianapolis
- Ultrasonic testing (UT) in Indianapolis
- Liquid penetrant testing (PT) in Indianapolis
- Magnetic particle inspection services
- NDT inspection services in Indiana
MT by industry for Indianapolis: Automotive Manufacturing.
MT by job: Magnetic particle weld inspection · Magnetic particle inspection of lifting equipment · Magnetic particle inspection of castings and forgings · Magnetic particle inspection of structural steel and bridges.
Training your own technicians: MT Level 1 training · MT Level 2 training · NDT training for Indianapolis technicians.
Request an MT inspection quote for Indianapolis
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for magnetic particle inspection in Indianapolis.
Need magnetic particle testing (MT) done, or learned?
Atlantis provides magnetic particle testing (MT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.