Magnetic Particle Testing (MT) Certification Course

Magnetic Particle Testing (MT) Level I and Level II certification covering magnetization technique (yoke, prods, coil, central conductor), wet/dry and fluorescent/visible particle media, demagnetization, and surface/near-surface discontinuity detection on ferromagnetic welds, castings and forgings. 12 classroom hours at Level I and 8 at Level II per SNT-TC-1A guidance. Online theory + on-site practical. See Liquid Penetrant Testing Level 1 for non-ferromagnetic materials, or the full training catalogue.

MT Level I and Level II course facts
MethodMagnetic Particle Testing (MT)
LevelLevel I and Level II
SchemeASNT SNT-TC-1A (employer-based)
PrerequisitesLevel I in the method (or the combined Level I + II hours); documented on-the-job experience; annual vision checks
Training hoursLevel I: 12 h classroom + 70 h on-the-job experience; Level II: 8 h classroom + 210 h on-the-job experience — SNT-TC-1A recommended minimums from our training requirements matrix; your written practice sets the binding figures
DeliverySelf-paced online theory with Level III support · Onsite at your facility
Practical examAdministered by an ASNT Level III under your written practice
PracticePractical NDT simulator (practice only — not a substitute for the practical exam)
InstructorAnoop Rayavarapu, ASNT NDT Level III

Request a course quote. We reply within one business day; published US fees are on the US training page.

For the full scope — wet fluorescent and dry powder examination on ferromagnetic welds, castings and fatigue-critical details — see magnetic particle testing, the national service page this Certification Course work is delivered under.

Get certified, or certify your team

Individuals train and sit examinations under their employer's written practice. Employers need that written practice, and a Level III to run it. Atlantis does both.

Start NDT training any time of year

Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.

Monthly starts
Portal access opens the moment you enrol, at any time of year.
Level III support
Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
Practical arrangements
Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.

Ask about enrolment and practical arrangements