Oil & Gas NDT Services in New York 2026 — ASNT Level III Led

Atlantis NDT delivers oil & gas ndt services in New York. ASNT NDT Level III + API ICP-certified inspectors. Our New York inspectors hold ASNT NDT Level II/III + ISO 9712 dual-scheme certs for Oil & Gas facility inspections.

Oil & Gas Inspection Scope in New York

Comprehensive NDT inspection for Oil & Gas facilities: pressure vessels (API 510), piping (API 570), above-ground storage tanks (API 653), heat exchangers + columns, fired heaters + furnaces, offshore platforms + FPSOs (where applicable), turnaround + EPC project support, RBI per API 581, FFS per API 579. Methods: UT (incl. PAUT + TOFD + LRUT), RT (DR + CR + real-time), MT (wet-fluorescent + dry-visible), PT, ET (incl. ECA), VT, AE, IRT, LT.

Code + Compliance

Oil & Gas facility inspections per: ASME B&PV Sections V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 936 + 1169; NACE MR0175 + MR0103 sour-service; ASTM E-series; ISO 17635/17636/17640; AWS D1.1/3.6; IACS Rec-20 marine. Audit-ready records per ISO 9001:2015 + ISO 17020 + ISO 17025 retained via Atlantis NDT ERP.

Atlantis NDT Stack Integration

Oil & Gas inspection in New York integrates with Atlantis NDT ERP + Digital Twin platform + Reporting Software + Atlantis NDT LMS + Atlantis NDT Academy + 3D Scanning Services + Atlantis AI for NDT. Affordable, accessible, fully customizable.

Free Consultation in New York

Atlantis NDT publishes no pricing — pricing varies by region + scope + delivery model. Request your free 30-minute consultation with founder Anoop Rayavarapu (ASNT NDT Level III multi-method, API 653, ISO 9001 Lead Auditor). Tailored New York Oil & Gas quote within 24 hours. See also verticals, consulting, New York ERP, New York training.

What oil and gas inspection actually covers

Assets in scope: pressure vessels and separators, process piping and flowlines, aboveground storage tanks, heat exchangers, fired heaters, wellheads and Christmas trees, and gathering and transmission pipelines.

Damage mechanisms that drive the inspection plan

Sulfidation and naphthenic acid corrosion at temperature; wet H2S cracking including HIC and SOHIC in sour service; CO2 corrosion and top-of-line corrosion in wet gas; microbiologically influenced corrosion in dead legs and low points; corrosion under insulation; and erosion-corrosion at elbows and reducers.

Methods applied

Ultrasonic thickness measurement at corrosion monitoring locations, phased array and TOFD for weld examination, radiography including profile radiography for small-bore and insulated lines, magnetic particle and penetrant for surface examination, guided wave for screening inaccessible runs, and MFL for tank floors.

Governing codes and standards

API 510 for pressure vessels, API 570 for piping, API 653 for storage tanks, API 580 and 581 for risk-based inspection, API 579 for fitness-for-service, API RP 571 for damage mechanisms, and ASME Section V and Section VIII throughout.

What makes this sector different

Inspection intervals derive from measured corrosion rate and remaining life rather than a fixed calendar, which makes the quality of the thickness data decisive. Readings that cannot be proven to come from the same corrosion monitoring location cannot support a defensible interval.

The New York asset base

New York is the financial and corporate command centre for the US energy industry, with Marathon Petroleum, ConocoPhillips, and major private-equity midstream operators headquartered or with major offices in Manhattan. Indian Point's decommissioning, the Bayway (Linden NJ) refinery 25 km west operated by Phillips 66, and the New York Harbor petroleum product import-export infrastructure generate sustained inspection demand. The NYSE-listed pipeline MLPs, the federal NRC nuclear oversight role across the Northeast, and the financial-grade integrity-management evidence required by investor-state lenders all create demand for the audit-grade reporting that digital twins automate.

How the work is controlled

Every examination carries its own evidence chain: the technician's certification for the method and level under ASNT SNT-TC-1A or ISO 9712, current on the day of inspection; the calibration status of instruments, probes, wedges and reference blocks, traceable under ISO 17025; and the revision of the procedure and technique sheet in force at the time. An ASNT NDT Level III reviews and signs the final disposition. That bundle is what a client or accreditation audit examines, and it is recorded as the work happens rather than assembled afterwards.