Manufacturing NDT Services in Corpus Christi 2026 — ASNT Level III Led

Atlantis NDT delivers manufacturing ndt services in Corpus Christi. ASNT NDT Level III + API ICP-certified inspectors. Corpus Christi is a key hub for refining, petrochemical & LNG operations. South Texas refining & export terminal experts. Our Corpus Christi inspectors hold ASNT Level III, API certified qualifications for Manufacturing facility inspections.

Manufacturing Inspection Scope in Corpus Christi

Comprehensive NDT inspection for Manufacturing facilities: pressure vessels (API 510), piping (API 570), above-ground storage tanks (API 653), heat exchangers + columns, fired heaters + furnaces, offshore platforms + FPSOs (where applicable), turnaround + EPC project support, RBI per API 581, FFS per API 579. Methods: UT (incl. PAUT + TOFD + LRUT), RT (DR + CR + real-time), MT (wet-fluorescent + dry-visible), PT, ET (incl. ECA), VT, AE, IRT, LT.

Code + Compliance

Manufacturing facility inspections per: ASME B&PV Sections V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 936 + 1169; NACE MR0175 + MR0103 sour-service; ASTM E-series; ISO 17635/17636/17640; AWS D1.1/3.6; IACS Rec-20 marine. Audit-ready records per ISO 9001:2015 + ISO 17020 + ISO 17025 retained via Atlantis NDT ERP.

Atlantis NDT Stack Integration

Manufacturing inspection in Corpus Christi integrates with Atlantis NDT ERP + Digital Twin platform + Reporting Software + Atlantis NDT LMS + Atlantis NDT Academy + 3D Scanning Services + Atlantis AI for NDT. Affordable, accessible, fully customizable.

Free Consultation in Corpus Christi

Atlantis NDT publishes no pricing — pricing varies by region + scope + delivery model. Request your free 30-minute consultation with founder Anoop Rayavarapu (ASNT NDT Level III multi-method, API 653, ISO 9001 Lead Auditor). Tailored Corpus Christi Manufacturing quote within 24 hours. See also verticals, consulting, Corpus Christi ERP, Corpus Christi training.

What manufacturing inspection actually covers

Assets in scope: castings and forgings, machined components, welded fabrications, pressure parts, and the production tooling and dies that make them.

Damage mechanisms that drive the inspection plan

Casting porosity, shrinkage and inclusions; forging laps, seams and bursts; quench cracking from heat treatment; weld defects in fabrication; grinding burns and surface damage from machining; and fatigue initiation at stress raisers in service.

Methods applied

Radiography for castings, ultrasonic for forgings and plate, magnetic particle and penetrant for surface examination after machining and heat treatment, eddy current for high-throughput surface screening, and hardness and PMI verification where material substitution is a risk.

Governing codes and standards

ASTM material and examination specifications, ASME Section V for the examination methods, ASME Section VIII where pressure parts are involved, ISO 9001 for the quality system, and customer-specific requirements which frequently exceed the base standard.

What makes this sector different

Inspection stage matters as much as method: examining before heat treatment misses quench cracking, examining after final machining risks scrapping value already added. The sequence is normally fixed by the process specification rather than chosen per part.

The Corpus Christi asset base

Corpus Christi is the largest US crude oil export terminal, with Cheniere's Corpus Christi LNG complex (Trains 1-3 plus the Stage 3 expansion) loading more than 15 mtpa of LNG, and Citgo's Corpus Christi Refinery, Flint Hills Resources West Refinery, and Valero's Bill Greehey complex collectively processing over 850,000 bpd. The Port of Corpus Christi has invested billions in deepening the channel to accommodate VLCCs, driving inspection demand on jetty structures, loading arms, and a dense cluster of new export-grade storage tanks. Hurricane exposure on the Texas Gulf Coast and the high cyclic loading of LNG loading operations on cryogenic equipment create a strong case for digital twin asset-integrity programmes.

How the work is controlled

Every examination carries its own evidence chain: the technician's certification for the method and level under ASNT SNT-TC-1A or ISO 9712, current on the day of inspection; the calibration status of instruments, probes, wedges and reference blocks, traceable under ISO 17025; and the revision of the procedure and technique sheet in force at the time. An ASNT NDT Level III reviews and signs the final disposition. That bundle is what a client or accreditation audit examines, and it is recorded as the work happens rather than assembled afterwards.