Magnetic Particle Inspection (MT) in Tacoma, Washington
Magnetic particle inspection finds surface and near-surface cracks in carbon and low-alloy steel, and Atlantis NDT performs it in Tacoma, Washington, on crane structures, welds, lifting gear, bridge steel and heavy fabrications. Technicians are mobilized to your terminal, yard or plant with yokes, particles and calibrated meters and examine to the code you name. Tell us about the work in the Tacoma MT inspection request and we reply within one business day.
Where magnetic particle testing is used in Tacoma
Steel is the material of Tacoma's economy. The deepwater port on Commencement Bay handles containers, bulk cargo and heavy lifts, and its cranes, spreaders, chassis and rail equipment put welded joints under repeated load. Spreader bars and twist-lock housings are inspected for cracking as a matter of routine, and the pad eyes, lugs and rigging points that handle lifts are classic magnetic particle targets. The tideflats add fabrication shops, metals processors and repair yards that work on tanks, frames and machinery. State transportation work on steel bridges, as well as railroad and trucking equipment serving the port, rounds out a steady stream of ferromagnetic components with welds that can crack. Magnetic particle testing is portable and immediate, which is why many Tacoma shops reach for it first on carbon steel.
How the method works and where it stops
The technician magnetizes the part. Any crack, lap or seam that interrupts the magnetic field near the surface leaks flux into the air, and iron particles sprinkled or sprayed on the surface collect there, drawing a visible line over the flaw. Because the method relies on magnetism, it is limited to ferromagnetic materials such as carbon steel, low-alloy steel and martensitic stainless; austenitic stainless steel, aluminum, bronze and most marine alloys cannot be examined this way. It is a surface and near-surface method; a flaw deep within a thick weld will not disturb the field enough to be seen. And direction matters: a crack running parallel to the field produces little leakage, so a second examination at roughly right angles is part of the standard technique. Knowing these limits is how you decide when MT is the right call and when to use another method.
Yokes, particles and lighting in the field
Field work is mostly done with electromagnetic yokes. ASME Section V Article 7 sets the performance check: an AC yoke has to lift at least 10 pounds at the largest pole spacing to be used, and a DC or permanent-magnet yoke at least 40 pounds. Particles are applied dry or in a liquid carrier, and in visible or fluorescent form. Visible wet particles over a white contrast coat are common on welds and are examined in good white light. Fluorescent particles, viewed under UV-A light in a darkened area, are more sensitive and are used for critical welds and fatigue-prone parts. Rain, spray and wind complicate this outdoors on the waterfront, so an enclosure or tent is often built around the test area, and dry powder is generally avoided when the surface is wet.
The surface must be clean, free of heavy rust, scale, oil and thick coatings, because any of them can hold particles or block them. After the examination, parts are demagnetized when residual fields could affect welding, instruments or later service, and the residual field is checked with a meter.
Governing codes and acceptance
The method is written down in ASME Section V Article 7, with ASTM E1444 and ASTM E709 as supporting standards. Acceptance depends on the code that built or repairs the item. ASME Section VIII Division 1 Appendix 6 applies to pressure vessels, ASME B31.3 paragraph 344.3 and Table 341.3.2 to process piping, AWS D1.1 to structural steel and AWS D1.5 to bridges. Steel crane structures are usually governed by AWS D1.1 or the manufacturer's specification, and a lifting-device owner's program may add its own criteria. Where the work supports API 510, 570 or 653 inspection, the owner's authorized inspector remains responsible; Atlantis carries out the examination and returns the data. Each job has a written procedure approved by an ASNT Level III, covering surface preparation, magnetizing method, particles, field check and acceptance criteria.
Washington's regulatory setting
The state's boiler and pressure vessel program, run by the Department of Labor and Industries, commissions inspectors through the National Board examination plus a Washington examination, and its rules sit in Chapter 296-104 of the Washington Administrative Code. The City of Tacoma separately requires a license for boiler operators. Repairs and alterations follow the National Board Inspection Code, and plants subject to OSHA process safety management document inspection and testing against recognized and generally accepted good engineering practice. For a Tacoma job these rules rarely change the technique, but they decide who has to witness a repair and which records the owner must keep.
Personnel and reporting
Tacoma has no Atlantis office; crews travel to your site for the agreed scope. Technicians are qualified under the company's written practice, built on ASNT SNT-TC-1A, with a Level II examining and interpreting and an ASNT Level III approving procedures and reviewing reports. The founder, Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT, holds that Level III role. Atlantis is certified to ISO 9001 and ISO 14001.
The report records component and weld IDs, material and surface condition, the procedure and revision, yoke or equipment ID and its check results, particle type and carrier, white-light or UV-A readings, the technician and level, and each indication with location, orientation and length. Indications are dispositioned as accept or reject against the stated criteria, normally with a photograph and a sketch so repair crews know where to grind.
Planning an MT job in Tacoma
Moisture is the dominant planning issue. Tacoma's wet months bring rain, mist and condensation to exposed steel, and wet particles need a clean, reasonably dry surface to work reliably. Winter days are short and gray, which suits fluorescent work in a tent but demands working lights for visible-particle jobs. Temperatures usually remain well within the range particle materials tolerate. Waterfront access is controlled, so credentials, safety orientation and escort rules should be arranged early. Hydrocarbon and chemical facilities restrict ignition sources, which affects electrical yokes and extension cords, and prods are typically barred. Elevated crane structures need the owner's lockout and fall-protection procedures, and the work is timed around vessel calls so the crane is free.
Salt deposits and marine coatings need attention too. Chloride deposits are removed before examination and the surface cleaned again after, particularly where the steel will be repainted or welded.
MT, PT or UT: choosing the method
Pick magnetic particle inspection when surface cracks in carbon steel are the concern and speed matters. If the material is stainless steel or aluminum, liquid penetrant testing in Tacoma is the surface method to use, and for wall loss or hidden weld flaws, ultrasonic testing in Tacoma is. Our national magnetic particle testing page covers the method generally, the Washington inspection hub lists related services, and the guide to MT versus PT compares the two surface methods.
Training your own MT examiners
Employers who want in-house examiners can start with MT Level 1 training and MT Level 2 training, and the magnetic particle testing complete guide is a good primer. For delivery details, see NDT training in Tacoma.
Crane and lifting-gear examinations in practice
Port equipment shows the pattern of fatigue clearly. Cracks start at weld toes where a stiffener meets a girder flange, at the corners of access openings, at the roots of cope cuts and around attachment welds for walkways and cable supports. A technician climbing a crane to examine these areas needs a short, clear list of locations from the owner's engineer or the manufacturer's inspection manual, plus a plan for lighting and the particle system. Spreaders and lifting beams are generally examined on the ground at a maintenance bay, where fluorescent particles and a darkened booth are easier to arrange. Findings are returned with sketches that reference the crane's own member designations so that the repair plan can be written quickly.
Examinations of this kind are usually scheduled as part of a planned outage. Giving us the outage window and the crane identification at the quote stage lets the procedure and equipment be prepared in advance.
Repair verification
After a crack is found, MT is used again to check that the excavation is clear before welding and to examine the completed repair. Both examinations belong in the record, because they show the defect was removed rather than welded over. Where the repair is on a pressure-retaining item, the National Board Inspection Code and the owner's repair procedure dictate who witnesses the examination, so mention any repair organization or inspector in the request.
Bridge steel and structural work in the region
The state transportation system around Puget Sound relies on steel girders, trusses and suspension components, and fabricators supplying that work follow AWS D1.5 for welding and examination. Fracture-critical members receive more rigorous inspection, and magnetic particle testing is a common surface check on their welds, both at the fabricator and during in-service inspection of existing structures. Access at height or over water brings its own planning, such as rope access or under-bridge units, which the owner arranges, and Atlantis supplies the technician and the examination.
Similar thinking applies to industrial structures: pipe racks, equipment supports and platform steel at port and tideflats facilities. Connections that see vibration or thermal movement, such as base plates, brace gussets and pipe-support welds, are the ones to examine first, and the procedure should say what is to be done where a prior repair weld or a heavily coated joint is encountered.
Documentation that stands up to audit
An MT report is only as good as the records behind it. The procedure number and revision, the yoke's identification and its lifting-power check, the particle lot, the light readings and the technician's level all belong on the page. The owner can use that record to answer questions from an insurer, a class surveyor, a customer or an authorized inspector months later, and it is the reason a written procedure approved by a Level III is worth the time it takes to prepare.
What to send before a Tacoma examination
A short package speeds the quote: the component or weld list with locations marked, material and coating condition, the code and edition that governs acceptance, the access method for elevated or waterside items, and any site rules on electrical equipment, permits and credentials. If an earlier inspection report exists, include it so the new examination can focus on previously noted areas.
Frequently asked questions
Can magnetic particle inspection be done outdoors in Tacoma's wet weather?
Yes with protection. Wet particles need a reasonably dry, clean surface, so technicians use tents or shelters, and fluorescent work gets a darkened enclosure. Heavy rain or standing water on the surface will stop the examination until conditions improve.
Does MT work on stainless steel and aluminum parts at the port?
Not on austenitic stainless steel, aluminum or bronze, because they are not ferromagnetic. Liquid penetrant testing is the surface method for those materials, and ultrasonic testing is used where the concern is below the surface.
What is the yoke lifting-power check?
ASME Section V Article 7 requires an AC yoke to lift at least 10 pounds at the maximum pole spacing, and a DC or permanent-magnet yoke at least 40 pounds. The technician proves this with a test weight before examining.
Can you inspect crane spreaders and lifting lugs?
Yes. Lifting lugs, pad eyes, spreader components and attachment welds are common MT targets. The owner provides access, the manufacturer's or engineer's inspection criteria and an outage window, and Atlantis delivers a report with sketches.
Are prods allowed on pressure equipment?
Many owners prohibit them, since arcing can burn the metal and spark in hydrocarbon areas. Yokes avoid that risk. The technique used is the one your specification permits, and restrictions are flagged during quoting.
Who decides whether an indication is acceptable?
Your code or specification supplies the acceptance criteria; the technician applies them and an ASNT Level III reviews the result. On API-inspected equipment the owner's authorized inspector makes repair and fitness decisions from our data.
Does marine coating interfere with magnetic particle testing?
Thick coatings reduce sensitivity and heavy salt or rust hold particles, so surfaces are cleaned and thin coatings are assessed against what the procedure allows. Where coating is too heavy, it is removed locally.
What should I include in a Tacoma MT quote request?
List the components or weld numbers, material and surface condition, governing code and edition, acceptance criteria, access method, and any site rules on electrical equipment or permits. Drawings or photographs of the areas of concern speed up the quote.
Inspection and training around Tacoma
- Ultrasonic testing (UT) in Tacoma
- Liquid penetrant testing (PT) in Tacoma
- Magnetic particle inspection services
- NDT inspection services in Washington
MT by industry for Tacoma: Marine & Shipbuilding · Pulp & Paper.
MT by job: Magnetic particle weld inspection · Magnetic particle inspection of lifting equipment · Magnetic particle inspection of castings and forgings · Magnetic particle inspection of structural steel and bridges.
Training your own technicians: MT Level 1 training · MT Level 2 training · NDT training for Tacoma technicians.
Request an MT inspection quote for Tacoma
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for magnetic particle inspection in Tacoma.
Need magnetic particle testing (MT) done, or learned?
Atlantis provides magnetic particle testing (MT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.