Magnetic Particle Inspection (MT) in Jacksonville, Florida
Atlantis NDT performs magnetic particle inspection (MT), also known as mag particle testing or MPI, in Jacksonville, Florida. It finds surface and near-surface cracks in ferromagnetic steel: welds on heavy-lift cranes, repair welds on ships in the harbor, bridge and structural connections, and rotating or lifting equipment in industrial plants. Technicians travel to the site once the scope is agreed. Send the details through the MT inspection quote form and we reply within one business day.
Where magnetic particle testing is used in Jacksonville
Jacksonville moves enormous tonnage across its docks. JAXPORT lists autos, containers, heavy lift, breakbulk, forest products, liquid bulk and military cargo among its handling categories, and each category relies on steel equipment that is loaded, vibrated and welded repeatedly. Magnetic particle inspection is the quick check that catches the crack before it becomes a failure.
- Heavy-lift and container cranes: welds at boom hinges, trolley frames, spreader connections and the base of pedestals, where cyclic loading starts fatigue cracks.
- Rigging and lifting gear: hooks, shackles, lifting lugs, pins and beams, which are examined periodically and after any overload event.
- Ship repair: repair welds on frames, stiffeners, rudder and propulsion supports, and weld toes around renewed plating inside the drydocks and repair berths of the harbor.
- Bridge and structural steel: fracture-critical members, gusset plates and welded connections on the many spans over the river and creeks, examined under bridge welding rules.
- Industrial plants: lifting attachments and support welds on vessels and tanks, and heavy machinery in mills and processing plants.
- Rail equipment and track structures: couplers, frames and welds on equipment serving the intermodal yards.
Moisture is the quiet enemy. Brackish air accelerates corrosion on weld toes and at bolted connections, and pitting at a toe is a ready-made stress riser that cracks under load. A crack at that location often hides under corrosion product until it is cleaned away.
What MT detects and what it cannot
When a ferromagnetic part is magnetized, a surface or near-surface discontinuity such as a crack, lap or lack of fusion interrupts the magnetic flux and leaks it into the air. Fine particles dusted or sprayed on the surface are caught at the leakage and outline the flaw in seconds. The result is a direct visual picture of the crack, its length and its orientation.
MT cannot examine nonmagnetic metals such as austenitic stainless steel, aluminum, copper or bronze. It is not a volumetric method, so it will miss flaws buried deeper than a small fraction of an inch. It also depends on direction: a crack lying along the field direction produces a weak or no indication, which is why two examinations at roughly right angles are standard. Thick coatings, heavy rust and sharp geometry change weaken or confuse the pattern, and the technician must distinguish true cracks from nonrelevant indications at section changes.
Standards and acceptance for MT jobs in Jacksonville
The technique rests on ASME Section V Article 7, with ASTM E1444 as the practice and ASTM E709 as a guide. The criteria applied are those of the governing code:
- ASME Section VIII Division 1 Mandatory Appendix 6 for vessel welds.
- ASME B31.3 paragraph 344.3 and Table 341.3.2 for process piping, and B31.1 for power piping.
- AWS D1.1 for structural steel, where visual and MT results are judged against weld profile and crack limits, and AWS D1.5 for bridge steel under state transportation agency contracts.
- API 510, 570 and 653 for in-service equipment, where the owner's authorized inspector remains responsible for the inspection and Atlantis delivers the examination data.
Lifting equipment may also fall under the equipment manufacturer's instructions and the owner's rigging program, and those documents are read and cited in the procedure.
How magnetic particle examination is performed
Preparation precedes everything. The area is cleaned of grease, loose scale and paint, and the contrast of the surface against the particles is checked. For field work the usual magnetizing tool is an electromagnetic yoke with articulated legs. Section V Article 7 sets the minimum lifting power at 10 pounds for an AC yoke and 40 pounds for a DC or permanent-magnet yoke, at the largest pole spacing used, and the yoke is lift-tested before use.
The steps run in a fixed order:
- Verify the equipment, the particle suspension or powder and the lighting.
- Magnetize the area with the yoke legs straddling the weld or suspect zone.
- Apply particles while the field is on, and examine while the particles are still mobile.
- Rotate the yoke about 90 degrees and repeat so that cracks in any direction are caught.
- Demagnetize if the part's use requires it, and clean the particles off.
Visible dry powder is common outdoors on rough, warm surfaces. Wet visible or fluorescent particles give more sensitivity, and fluorescent work is viewed under UV-A light in a darkened area, which on a bright Jacksonville day means a tent or a shaded enclosure. A field indicator or a reference piece confirms the direction and strength of the field.
What the indications look like
A true crack on a wet or dry MT inspection appears as a sharp, tight line, often crooked, that builds up as the field is held and stays when the particles are lightly disturbed. A weld toe crack runs along the edge of the weld. A crater crack at the end of a weld star-shapes. A fatigue crack in a hook or a pin follows the root of a thread or a corner. Nonrelevant indications look different: they are broad and fuzzy, and appear at changes of section, at the edge of a heat-affected zone or along a magnetic writing where two pieces touch.
When the technician is unsure, the standard moves are to wipe the area, magnetize again at a different angle and compare. If the indication returns the same way, it is measured and evaluated. If it disappears, the cause is noted. Doubtful cases go to the Level III, and nothing is signed off as clean on a guess.
Surface preparation and recoating
Preparation on a Jacksonville job is usually a matter of removing salt crust, marine growth, flaking coatings and weld spatter with a wire brush or a grinder. The technician checks that the surface is dry, because water changes how particles move. Thin intact coatings can stay when the procedure covers them, but thick ones come off locally. After examination the surface is wiped clean of particles. Because bare steel starts rusting quickly in this climate, the owner's coating crew should be ready to recoat soon after the report is issued.
Lifting gear, repair history and record keeping
Owners of lifting gear get the most from MT when the examination is tied to the equipment's history. Each hook, pin or lug has a serial number or tag, and the report ties the result to it, so a later examination can show whether a mark was present last time and whether it has grown. A part that fails, or is repaired by welding, is re-examined after the repair and again after any load test, and all three results sit in the same file. For heavy-lift equipment that moves between jobs, that file becomes the proof an owner or a customer asks to see.
The owner decides what to do with a rejected component. Atlantis reports the finding and the criterion it failed; replacement, repair procedure and return-to-service approval stay with the owner and the engineer or manufacturer responsible for the equipment.
Who performs the work
MT is performed by Level II technicians qualified under Atlantis's written practice, which is based on ASNT SNT-TC-1A. Procedures are approved by an ASNT Level III, Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT. Atlantis is certified to ISO 9001 and ISO 14001. Customers who have their own procedure format can use Level III consulting to align it, and the national magnetic particle testing page covers the service in general.
What the MT report contains
Each report names the component, its tag or drawing reference and location, the procedure and revision, the equipment and its calibration or lift-test status, the particle type, the lighting measurements and the surface condition. Indications are recorded with location, orientation and length, supported by sketches or photographs, and marked accepted or rejected against the code criterion. After a repair the area is re-examined and added to the same report, so the sequence of original crack, repair and final clean result stays in one document.
Wet or dry particles for Jacksonville conditions
The choice between particle forms is made by the surface and the weather. Dry powder is easy to carry and works on warm, rough steel such as a crane boom, but it loses mobility in damp air. Wet visible particles in an oil or water carrier give a smoother, more sensitive pattern on cleaned welds. Wet fluorescent particles are the most sensitive and suit critical welds, provided a dark enclosure can be set up. The procedure states which form applies to which component, and the technician records the particle concentration check that proves the suspension is working.
Planning an MT job in Jacksonville
Hot, humid summers and thunderstorms dominate the planning. Steel in the sun can run well above air temperature, so part temperature is checked against the procedure's limits, and shaded or early work is sensible for exposed structures. Dry powder clumps in damp air, which is a reason to prefer wet particles during the wet season. Lightning and wind interrupt crane and rigging work, and during hurricane season the port and shipyards shift to storm preparation.
Access follows the site's rules: port credentials, safety orientation, permits for confined spaces and hot work, and the vessel or equipment schedule. Bridge work adds traffic control and lane closures arranged by the owner. Atlantis has no office in Jacksonville, so technicians are mobilized from outside the area and travel appears in the quote.
MT, PT or UT for your Jacksonville job
Use MT for surface cracks in carbon and low-alloy steel, particularly in welds and lifting gear. Use liquid penetrant testing in Jacksonville for nonmagnetic metals and for any clean, non-porous surface. Use ultrasonic testing in Jacksonville where wall loss or internal weld flaws are the concern. A repair can need all three: UT to define the thin area, MT on the new welds and PT on the stainless fittings. Further reading is available in the magnetic particle testing guide, the Article 7 explainer and on the Florida inspection hub.
Training your own MT technicians
Maintenance departments and shipyards that inspect gear regularly may choose to train their own people. MT Level 1 and MT Level 2 courses are offered, as is the magnetic particle testing training overview and the NDT training in Jacksonville page. Under SNT-TC-1A the employer completes the qualification and certification.
Frequently asked questions
What materials can be examined by magnetic particle inspection in Jacksonville?
Only ferromagnetic materials such as carbon and low-alloy steel. Austenitic stainless steel, aluminum, copper and bronze are not magnetic, so those metals are examined by liquid penetrant testing instead.
How often should crane hooks and rigging gear be checked with MT?
The interval is set by the manufacturer, the owner rigging program and the applicable standard, and checks are usually repeated after overload events. MT is one tool in that program, alongside visual checks and load tests.
Can magnetic particle inspection be done through paint?
Thin, well-bonded coatings may be left on if the procedure demonstrated that indications still show through them. Thicker or flaking coatings and heavy rust are removed locally before the examination.
Why does the yoke need a lift test before use?
Section V Article 7 requires an AC yoke to lift at least 10 pounds and a DC or permanent-magnet yoke at least 40 pounds at the maximum pole spacing. The lift test proves the field strength is adequate before any weld is examined.
Does Atlantis examine bridge welds in Jacksonville?
Atlantis performs MT and UT on welded steel to the code the owner specifies, including AWS D1.5 for highway bridges. Traffic control, access equipment and owner approval of the procedure are arranged by the bridge owner.
Does humidity affect magnetic particle testing on the coast?
Yes. Dry powder clumps and loses mobility in damp air, and wet surfaces can disturb the test. Wet particles or shaded, drier working windows are often chosen for Jacksonville jobs in the summer.
Is demagnetization needed after MT?
It is needed if leftover magnetism could affect later welding, machining, instruments or bearings. The part is checked with a gauss meter, and the requirement is written into the scope and the report.
How can I request MT inspection in Jacksonville?
Use the quote form with the parts, steel type, coating condition, location, access, governing code and site requirements. Atlantis has no office in Jacksonville, technicians travel to you, and we reply within one business day.
Inspection and training around Jacksonville
- Ultrasonic testing (UT) in Jacksonville
- Liquid penetrant testing (PT) in Jacksonville
- Magnetic particle inspection services
- NDT inspection services in Florida
MT by industry for Jacksonville: Marine & Shipbuilding · Rail · Pulp & Paper.
MT by job: Magnetic particle weld inspection · Magnetic particle inspection of lifting equipment · Magnetic particle inspection of castings and forgings · Magnetic particle inspection of structural steel and bridges.
Training your own technicians: MT Level 1 training · MT Level 2 training · NDT training for Jacksonville technicians.
Request an MT inspection quote for Jacksonville
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for magnetic particle inspection in Jacksonville.
Need magnetic particle testing (MT) done, or learned?
Atlantis provides magnetic particle testing (MT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.