Weld Inspection Services in Bangalore 2026 — ASNT Level III Led

Atlantis NDT delivers weld inspection services in Bangalore. Methods: UT (including PAUT and TOFD), RT, MT, PT and VT, with procedures and reports reviewed by an ASNT NDT Level III. Bangalore facilities in the aerospace, defense & manufacturing sectors require rigorous weld inspection services. Technicians are certified by their employer to its SNT-TC-1A written practice.

For the national service, with the methods used, what you receive and how crews are mobilised, see weld inspection services.

Weld Inspection Services Scope

Weld inspection covers: butt, fillet, socket, and overlay welds per AWS D1.1 + ASME Section IX; pipeline girth welds per API 1104; pressure-vessel and piping welds per ASME B&PV Section VIII + B31.3. Full-penetration volumetric examination (RT/UT/PAUT/TOFD) plus surface examination (MT/PT/VT) at root, intermediate, and final-cap stages. Atlantis NDT Level III approves every Procedure + signs off final disposition + audit-ready records via Atlantis NDT ERP.

Code + Compliance

Weld Inspection Services per: ASME B&PV Sections V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 1104 + 1169; ASTM E-series; ISO 17635/17636/17640; AWS D1.1/3.6; IACS Rec-20 marine; NACE MR0175 + MR0103 sour-service.

Free Consultation

Atlantis NDT publishes no pricing — varies by region + scope. Request your free 30-minute consultation. Every job is quoted on request. See also verticals, Bangalore ERP, Bangalore training, Bangalore consulting.

What weld inspection involves

Weld inspection verifies that a joint meets the acceptance criteria of the governing construction code, using methods selected for the defect types credible in that joint configuration and material.

Scope of work

Visual examination of profile, undercut, reinforcement and surface condition to a written procedure
Radiography or ultrasonic examination of weld volume, including phased array and TOFD on thicker sections
Magnetic particle or penetrant examination for surface-breaking indications
Welder and procedure qualification record verification against ASME Section IX
Positive material identification where material substitution is a risk

Governing codes

ASME Section VIII and Section IX, ASME B31.1 and B31.3, AWS D1.1, API 1104, and ASME Section V for the examination methods themselves.

The Bangalore asset base

Bangalore (Bengaluru) is India's aerospace and defence capital, with Hindustan Aeronautics Limited (HAL), Bharat Electronics Limited (BEL), the Indian Space Research Organisation (ISRO) headquarters, Boeing India Aerospace Joint Venture (Tata-Boeing fuselage), and the Airbus India Engineering Centre coordinating NAS 410 NDT, AS9100 quality systems, and aerospace fatigue-and-fracture programmes. The Karnataka State Industrial and Infrastructure Development Corporation oversees a dense industrial belt including ABB India, Siemens India, and the Toyota Kirloskar manufacturing complex. The DGCA, AERB (for ISRO supply-chain), and DRDO supplier-qualification framework make Bangalore a uniquely aerospace-focused digital twin market.

How the work is controlled

Agree personnel qualification, equipment checks, procedure revision and review responsibilities for the examination. Retain those records with the results and coverage limitations.

What you receive

A report in your required format, with findings located against the component and, where relevant, against a persistent corrosion monitoring location so trends stay continuous between campaigns
Raw data in the instrument-native format plus an open export, so the dataset outlives any single supplier relationship
The procedure revision, technician certification state and instrument calibration status applicable at the time of examination
Where a finding affects continued service, the specific code clause governing the acceptance decision