Pipeline Inspection Services in New Orleans 2026 — ASNT Level III Led

Atlantis NDT delivers pipeline inspection services in New Orleans. Methods: UT (including PAUT and TOFD), MT, PT and VT, with procedures and reports reviewed by an ASNT NDT Level III. New Orleans facilities in the LNG, petrochemical & refining sectors require rigorous pipeline inspection services. Technicians are certified by their employer to its SNT-TC-1A written practice. Where we work: nationwide. Technicians are mobilised to your site anywhere in the USA; apart from the Houston office there is no local office, so mobilisation is planned and quoted for each job.

In the United States, Atlantis does not perform radiographic testing (RT): industrial radiography is licensed under NRC rules (10 CFR Part 34) or Agreement State rules. Where the code and the owner allow, ultrasonic testing is the volumetric alternative, and an ASNT Level III can review the radiographs and RT procedures of your licensed radiography contractor.

Pipeline Inspection Services Scope

Pipeline inspection covers: girth weld examination by UT, PAUT and RT; wall-loss measurement by UT thickness and corrosion mapping on above-ground sections and at integrity digs; surface-crack examination by MT — all per API 1104, ASME B31.4/B31.8, and 49 CFR 192/195 where applicable. In-line inspection tool runs are made by ILI vendors; excavation is by the dig contractor. Atlantis NDT Level III approves every Procedure + signs off final disposition + audit-ready records via Atlantis NDT ERP.

Code + Compliance

Pipeline Inspection Services per: ASME B&PV Sections V + VIII + IX + XI; ASME B31 piping series; API 510 + 570 + 571 + 579 + 580 + 581 + 653 + 1104 + 1169; ASTM E-series; ISO 17635/17636/17640; AWS D1.1/3.6; IACS Rec-20 marine; NACE MR0175 + MR0103 sour-service.

Free Consultation

Atlantis NDT publishes no pricing — varies by region + scope. Request your free 30-minute consultation. Every job is quoted on request. See also verticals, New Orleans ERP, New Orleans training, New Orleans consulting.

What pipeline inspection involves

Pipeline inspection establishes the condition of a line along its length, combining in-line inspection where the line is piggable with direct assessment where it is not, and verifying both against excavation findings.

Scope of work

  • In-line inspection data review and dig prioritisation from MFL, ultrasonic and crack-detection runs
  • Guided wave screening of cased crossings and inaccessible sections
  • Dig verification with ultrasonic wall measurement and magnetic particle crack examination
  • Coating and cathodic protection survey interpretation
  • Girth weld examination by automated ultrasonic testing or radiography on new construction

Governing codes

ASME B31.4 and B31.8 for design and operation, B31.8S for integrity management, API 1104 for welding, and the applicable regulator's integrity management rule.

The New Orleans asset base

New Orleans anchors the Lower Mississippi River chemical corridor, with major refineries operated by Phillips 66, Valero, and Marathon alongside LNG export terminals and a dense network of petrochemical facilities. The strategic importance of Gulf Coast energy infrastructure and its exposure to hurricane-related damage drives risk-based inspection planning, where digital twin platforms provide the geographic and condition data needed to prioritise inspection scopes after weather events. High humidity, temperature cycling, and external corrosion from the Mississippi River industrial environment are monitored in real time through 3D asset models.

How the work is controlled

Agree personnel qualification, equipment checks, procedure revision and review responsibilities for the examination. Retain those records with the results and coverage limitations.

What you receive

  • A report in your required format, with findings located against the component and, where relevant, against a persistent corrosion monitoring location so trends stay continuous between campaigns
  • Raw data in the instrument-native format plus an open export, so the dataset outlives any single supplier relationship
  • The procedure revision, technician certification state and instrument calibration status applicable at the time of examination
  • Where a finding affects continued service, the specific code clause governing the acceptance decision

Related: asset integrity management software · inspection management software · ASNT Level III consulting · digital twin for asset integrity. Request a quote for New Orleans.