Eddy Current Testing (ET) Services in London 2026 — ASNT Level III Led
Atlantis NDT delivers professional Eddy Current Testing (ET) inspection services in London from ASNT NDT Level II + III certified inspectors. Specialising in heat exchanger tube inspection, surface crack detection and conductivity testing. ET is used across London's industrial base. Technicians are qualified to the governing SNT-TC-1A written practice, and procedures and reports are reviewed by an ASNT NDT Level III (UT, RT, MT, PT, VT).
Eddy Current Testing Method Overview
Eddy Current Testing (ET) is a core NDT method covered in detail at our ET pillar hub. Per ASME Section V, ASTM E-series, ISO 17635 + applicable method-specific standard. Atlantis NDT Level III approves every Procedure + signs off final disposition. Calibration block + reference standard traceable to NIST / NPL / PTB. Procedure pack + technique sheet + qualification block included.
Code Coverage and Personnel Certification
Delivery Model in London
On-site mobilisation across North America, confirmed in your RFQ. Remote procedure authoring + ASNT NDT Level III sign-off. Hybrid model — local Level II + Atlantis Level III remote oversight — common pattern for multi-region EPC + asset-owner customers in London.
Free Consultation + Tailored Quote
Atlantis NDT publishes no pricing — pricing varies by region + scope + delivery model. Request your free 30-minute consultation with Atlantis NDT founder Anoop Rayavarapu (ASNT NDT Level III in UT, RT, MT, PT and VT). Every job is quoted on request. Affordable, accessible, fully customizable. See also Eddy Current Testing pillar, London ERP, London training, London consulting.
Work in London is delivered under the same procedures and Level III oversight described on our national eddy current testing page, which covers bobbin, array and rotating-probe tube inspection plus surface examination on non-ferrous and coated components.
Need eddy current testing (ET) done, or learned?
Atlantis provides eddy current testing (ET) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.
Prepare a useful eddy-current examination scope
Confirm that the material is electrically conductive. Identify whether the task concerns surface cracking, tubing, material sorting or another defined application. Provide geometry, material condition, surface coating and expected access before selecting a probe and technique.
Understand the technique limitations
Reference standards, frequency, probe selection and lift-off affect the response. Geometry, conductivity and permeability changes can also produce signals. A setup developed for one component should not be assumed suitable for a different material or discontinuity orientation.
Specify the records and review
Record the reference standard, setup, coverage and limitations with the examination results. Retain the relevant signals and location references where the technique requires them. Confirm how ambiguous responses will be investigated and who makes the acceptance decision.
For background, see ASNT’s method overview. Discuss procedure and personnel requirements before confirming the work.