Eddy Current Testing (ET) Level 2 Course

Eddy Current Testing (ET) Level II training covering coil selection, impedance-plane signal analysis, heat-exchanger and condenser tube-inspection technique, and surface-crack detection on non-ferromagnetic materials — 40 classroom hours per SNT-TC-1A guidance, in addition to Level I; aerospace certification is issued by the employer, not by Atlantis. ASNT NDT Level III-led, online theory + on-site practical. See Magnetic Particle Testing for ferromagnetic surface work, or the full training catalogue.

ET Level II course facts
MethodEddy Current Testing (ET)
LevelLevel II
SchemeASNT SNT-TC-1A (employer-based)
PrerequisitesLevel I in the method (or the combined Level I + II hours); documented on-the-job experience; annual vision checks
Training hours40 h classroom + 630 h on-the-job experience (in addition to Level I: 40 h classroom, 210 h OJT) — SNT-TC-1A recommended minimums from our training requirements matrix; your written practice sets the binding figures
DeliverySelf-paced online theory with Level III support · Onsite at your facility
Practical examAdministered by an ASNT Level III under your written practice
PracticePractical NDT simulator (practice only — not a substitute for the practical exam)
InstructorAnoop Rayavarapu, ASNT NDT Level III

Request a course quote. We reply within one business day; published US fees are on the US training page.

For the full scope — bobbin, array and rotating-probe tube inspection plus surface examination on non-ferrous and coated components — see eddy current testing, the national service page this Level 2 Course work is delivered under.

Get certified, or certify your team

Individuals train and sit examinations under their employer's written practice. Employers need that written practice, and a Level III to run it. Atlantis does both.

Start NDT training any time of year

Enrolment is open throughout the year. Courses are primarily self-paced, so you can join at any time and work through the learning material around your schedule.

Monthly starts
Portal access opens the moment you enrol, at any time of year.
Level III support
Level III support is available throughout the year for course clarifications. Confirm the contact method and arrangements when you enrol.
Practical arrangements
Practicals are done in the Practical NDT simulator and in person at your employer’s facility, on its equipment and parts. Simulator practice supports training; it does not replace supervised experience, the practical examination or employer certification.

Ask about enrolment and practical arrangements