Ultrasonic Testing (UT) and Weld Inspection in Fort Worth, Texas
If you operate steel equipment in Fort Worth, Atlantis NDT can mobilize a Level II technician to measure what is left of the wall and to examine welds ultrasonically. We perform ultrasonic thickness testing on tanks, vessels, piping and structural members, and UT weld inspection with angle-beam shear-wave probes, then issue a report that your inspector or engineer can file. Send the equipment list, code and access details through the quote request form; we reply within one business day.
Where UT is used around Fort Worth
Fort Worth is a logistics, aerospace and energy city, and UT follows the steel in each. A major freight railroad is run from the city, and Tarrant County is crossed by mainlines, yards and intermodal terminals. The AllianceTexas development in the north of the city covers about 27,000 acres, with an airport that ranks among the larger cargo airports in the country, distribution buildings, a rail-served inland port and manufacturing plants. Each of these has steel to measure: crane rails and runway beams in industrial buildings, tank and piping systems for fuel and utilities, loading structures, and heavy steel racking.
Aerospace and defense are major employers. Aircraft manufacturers and their suppliers use ground-support equipment, jigs, pressure vessels for test and utility services, and plant piping for compressed air, nitrogen and hydraulics. New hangar and maintenance construction at the airport brings structural steel and fabricated platforms. West and south of the city, the Barnett Shale built a gas-gathering network of pipelines, compressor stations, separators and tanks, and although drilling has slowed, those assets still need periodic wall thickness checks. The nearby Arlington assembly plant and its suppliers add stamping presses, pressure receivers and process piping.
Thickness surveys: method and judgment
A thickness survey is a map of remaining wall. The technician selects a dual-element probe, which suits corroded and pitted surfaces because the transmit and receive crystals are angled to share a short sound path. He calibrates on a step block of the same alloy covering the thickness range, confirms the zero point, and checks again at the end of the job. On gas-gathering piping and tanks the measurement grid usually follows the owner's inspection plan, with readings at condition monitoring locations marked on the isometric.
The A-scan stays on the display. A digital gauge can lock onto a lamination mid-wall and report a thickness that is not the back wall, or it can double on thin steel. Reading the waveform catches both. Where the outer surface is rough, we dress a small patch to bright metal and record that the reading came from a prepared spot. Lines in service at elevated temperature need high-temperature probes and couplant, and the reading is adjusted for temperature. ASME Section V Article 5, ASTM E797 and our thickness measurement requirements guide give the background; the national page on ultrasonic testing services explains the full scope.
Shear-wave examination of welds
Weld examination uses an angled probe, typically 45, 60 or 70 degrees, to send shear waves obliquely through the joint. The technician builds a reference level from side-drilled holes in a calibration block of similar acoustic character, then scans from both sides of the weld where access allows, moving the probe in a raster pattern to cover the full volume. A reflector is classified by amplitude, position and the way the echo moves as the probe moves: planar flaws such as cracks and lack of fusion produce sharp, directional echoes, while slag and porosity produce more rounded, less directional ones.
In Fort Worth this serves structural fabricators building to AWS D1.1, pressure-equipment shops working to ASME Section VIII and B31.3, and operators who have made repairs to pipe or vessel welds. Where the code allows UT instead of radiography, the owner, engineer and authorized inspector agree it before work begins. The ultrasonic testing guide explains how the technique is applied.
What UT can and cannot see
Ultrasound reads through the wall, so UT is the conventional method that looks inside. It finds wall loss from corrosion and erosion, laminations, and internal weld flaws that reflect the beam back toward the probe. It is weak where sound cannot enter or return. Scale and thick coating prevent contact, cast and austenitic material scatters the beam, a weld crown can block probe positions, and a flaw parallel to the beam hardly reflects at all. UT also does not replace a surface method for fine surface-breaking cracks, especially on rough surfaces.
- Contact: poor coupling gives readings that look steady but are wrong, so surface preparation is part of the work.
- Geometry: nozzles, tees and tight bends limit where an angle beam can scan.
- Material: coarse grain in castings and stainless welds causes noise that hides small reflectors.
For surface cracks at carbon-steel weld toes, add magnetic particle testing in Fort Worth; for stainless or aluminum, add penetrant testing in Fort Worth.
Codes, acceptance and the Texas framework
The governing code sets the procedure and the acceptance limits. Pressure vessels in service fall under API 510, piping under API 570 and tanks under API 653, where the owner's authorized inspector is responsible and we supply the measurements and weld data. New construction and repair use ASME Section VIII Division 1, where Appendix 12 covers ultrasonic examination of welds, or B31.3, where paragraph 344.6 and Table 341.3.2 set the examination and acceptance. Structural steel follows AWS D1.1, and state-funded bridge steel follows AWS D1.5. Pipelines carrying gas or hazardous liquids come under 49 CFR Parts 192 and 195, with API 1104 for girth welds, and the Railroad Commission of Texas oversees intrastate pipeline safety.
The state boiler program, run by the Texas Department of Licensing and Regulation under Health and Safety Code Chapter 755, sets inspection intervals by the ASME construction code and requires commissioned inspectors. If your Fort Worth facility operates registered steam or hot-water boilers, our thickness data on drums, headers and tubes informs that inspector; it does not stand in for the commissioned inspection. For process plants, OSHA 29 CFR 1910.119(j) requires mechanical-integrity inspection under recognized good engineering practice.
Qualification and oversight
We have no office in Fort Worth, and technicians travel to your site for the scope. They are qualified under the Atlantis written practice, which follows ASNT SNT-TC-1A. Level II technicians set up, perform and interpret; an ASNT Level III approves procedures and reviews reports. Technical oversight comes from Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT, and the company holds ISO 9001 and ISO 14001 certification. For operators that need a written practice or a UT procedure for a particular code, see ASNT Level III consulting and written practice development.
Typical Fort Worth UT scopes
Requests tend to follow a few patterns. A warehouse or manufacturing plant wants thickness readings on compressed-air receivers, steam lines and tanks as part of its mechanical-integrity schedule. A fabricator wants shear-wave examination of critical groove welds on structural assemblies before shipment. A gas-processing operator wants thickness surveys on separators, scrubbers and gathering piping at fixed locations, repeated each cycle so corrosion rates can be calculated. An airport or logistics campus wants a crane runway or a support structure checked after a modification. Whatever the case, we agree the locations, the procedure and the acceptance criteria first, so the data answers the question you actually have.
Repeatability is what makes thickness data useful. Locations are marked with paint or tags and drawn on an isometric so that the next survey lands on the same spots, which lets your inspector calculate corrosion rate and remaining life instead of comparing unrelated numbers.
What you receive in the UT report
The record should let a second Level II repeat the work. It lists the equipment tag and drawing, the code and procedure with revision, the instrument, probe and wedge details, the calibration blocks and their dates, the surface condition and temperature, and the technician and level. Thickness results appear as a grid with nominal and measured values and flag any location below the owner's minimum wall. Weld results include the scan plan, the reference level, and every recordable indication with position, length, amplitude and depth, followed by an accept or reject decision against the stated criteria and a sketch of the weld showing where each indication lies.
Planning UT in Fort Worth
North Texas weather swings widely. Summer steel in sun runs hot enough to affect standard probes and couplant, so outdoor work on tanks and rack piping is planned for shaded or cooler hours, and high-temperature gear is brought where lines are hot. Winter brings occasional hard freezes, when couplant thickens and surface moisture freezes into an insulating film; spring storms bring wind and rain that stop outdoor examination altogether. Allow for these when you set outage dates.
Site access is the other variable. Distribution and aviation sites at Alliance have security and badging procedures, and rail property requires its own safety training and contractor orientation before anyone goes near track. Plants have permit systems for hot work, confined space and work at height. Tell us early where the equipment is, how it is reached and what the shutdown window is, so the scope fits what can be reached and measured in the time you have.
Choosing between UT, MT and PT in Fort Worth
Use UT when the question is about wall loss, depth or internal flaws. Use magnetic particle on carbon steel when the question is a crack at the surface. Use penetrant on stainless, aluminum and other non-magnetic material. A single vessel often calls for all three, with UT for remaining wall, MT on nozzle welds and PT on stainless internals. Our MT versus PT comparison sets out the differences, and we will help you sequence the methods.
Building in-house UT capability
If you prefer your own technicians, we run UT Level 1 and UT Level 2 courses based on SNT-TC-1A hours, with theory online and practice on the UT practical simulator. Your company certifies its technicians under its own written practice, and the hands-on practical takes place at your facility. See NDT training in Fort Worth and the SNT-TC-1A eligibility tool for the experience a candidate needs.
Frequently asked questions
Does Atlantis have an office in Fort Worth?
No. Atlantis has no office in Fort Worth. We mobilize Level II technicians to your plant, yard or facility for an agreed scope and bring the instruments, probes, blocks and couplant they need.
What UT work do you do in Fort Worth?
We perform contact ultrasonic thickness measurement on tanks, vessels, piping and structural steel, and angle-beam examination of welds. We do not perform radiography in the United States or any advanced ultrasonic technique.
Can UT be used instead of radiography on welds?
Sometimes. ASME B31.3, API 1104, AWS D1.1 and ASME Section VIII treat ultrasonic examination differently, so the owner, engineer and authorized inspector must agree the substitution before the work starts.
How do you avoid wrong readings on corroded pipe and tanks?
We use dual-element probes, calibrate on a step block of the same alloy, watch the A-scan for laminations and doubling, and dress a small patch to bright metal where the surface is rough. Prepared spots are recorded as such.
Do you work on API 510, 570 and 653 equipment?
We supply the examination data for it. The owner's authorized inspector stays responsible for the inspection and fitness decisions, and we provide thickness readings, weld data, procedures and calibration records.
How does Texas boiler law relate to UT results?
Texas regulates boilers through the Department of Licensing and Regulation under Health and Safety Code Chapter 755, using commissioned inspectors. Our UT data supports their decisions and does not replace their certificate inspection.
What affects UT on hot piping?
Standard probes and couplant have temperature limits, and sound velocity changes in hot steel. We use high-temperature probes and couplant, record the surface temperature and apply the correction in the procedure.
How do I request a UT quote in Fort Worth?
Use the quote form to send equipment types, code, thickness range, surface condition, access notes and your outage window. We scope the examination, state assumptions and reply within one business day.
Can you train our technicians in ultrasonic testing?
Yes. We teach Level 1 and Level 2 ultrasonic courses built on SNT-TC-1A recommended hours, combining online theory with simulator practice. Your own company certifies the technicians and hosts the hands-on practical.
Inspection and training around Fort Worth
- Magnetic particle inspection (MT) in Fort Worth
- Liquid penetrant testing (PT) in Fort Worth
- Ultrasonic inspection services
- NDT inspection services in Texas
UT by industry for Fort Worth: Aviation & Aerospace · Rail.
UT by job: Ultrasonic pipe thickness testing · Ultrasonic weld inspection · Ultrasonic boiler tube thickness testing · Ultrasonic testing of castings and forgings.
Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Fort Worth technicians.
Request an UT inspection quote for Fort Worth
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for ultrasonic testing in Fort Worth.
Need ultrasonic testing (UT) done, or learned?
Atlantis provides ultrasonic testing (UT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.