Radiographic Testing in Pittsburgh, Pennsylvania: What Atlantis Offers
If you searched for radiographic testing in Pittsburgh, here is the plain answer: Atlantis NDT does not perform radiographic testing in the United States. Industrial radiography is a licensed activity, regulated under the Nuclear Regulatory Commission rules in 10 CFR Part 34 or the equivalent rules of an Agreement State, and it is not a service Atlantis offers here. What Atlantis does offer is a set of options that often answer the same question without a radiation source.
Ultrasonic testing as the volumetric alternative in Pittsburgh
When the real need is to know what is inside a weld, ultrasonic examination can be a volumetric alternative where the construction code and the owner allow it. ASME B31.3 and API 1104 contain provisions for ultrasonic examination of production welds, AWS D1.1 has its own acceptance criteria for ultrasonic examination of groove welds, and ASME Section VIII permits ultrasonic examination in place of radiography only under specific conditions. None of these is automatic. The substitution is agreed with the owner, the design engineer and, on code work, the authorized inspector before the job begins, and the procedure is written to the code that governs the weld.
Atlantis technicians are mobilized to Pittsburgh sites for this work; there is no office in the city. See ultrasonic testing in Pittsburgh for the weld and thickness service, and send the weld details if you want an opinion on whether UT fits your code.
ASNT Level III radiography services that need no radiation licence
Reviewing radiographic evidence does not require a source license, because no exposure is made. Atlantis can review radiographs, whether film or digital images, together with the technique sheets that produced them, against ASME Section V Article 2 and the construction code. A second read on a disputed indication is a common request in Pittsburgh fabrication, where a shop and an owner sometimes disagree about whether a mark is slag, porosity or a crack. Atlantis can also review an RT contractor's procedure and written practice for completeness and code compliance before work starts.
- Independent interpretation of radiographs and digital images against the code acceptance criteria
- Review of technique sheets, sensitivity, density and image quality indicators
- Second opinion on disputed or borderline indications
- Review of an RT contractor's procedure, personnel qualification records and written practice
This work is led by ASNT NDT Level III personnel, including our founder, Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT. Atlantis does not recommend or name radiography contractors, since the owner chooses and contracts the licensed company directly.
Pittsburgh jobs where this comes up
Radiography questions in Pittsburgh usually arise on pressure vessel and piping fabrication, structural and crane weld repair in the Monongahela mills, pipeline and compressor station welds in the gas build-out, and power plant piping. In each case the owner holds the code and the acceptance decision. Pennsylvania pressure vessels and boilers are covered by the Department of Labor and Industry program, which references the National Board Inspection Code, so documentation quality matters. A second reviewer with Level III authority can catch an interpretation problem before it becomes a rejected data book.
Training in radiography theory
If you want your own staff to understand radiographic interpretation, Atlantis teaches a theory course: RT Level 2 course. It covers principles, image quality and interpretation under the SNT-TC-1A recommended practice. It does not replace radiation safety training or a state or federal radiographer license, which are separate requirements. See the Pittsburgh NDT training page for enrollment.
Other Atlantis inspection in Pittsburgh
For surface cracks and wall loss the options are magnetic particle testing, liquid penetrant testing and ultrasonic thickness testing, all performed by technicians mobilized to your site. The Pennsylvania inspection hub lists the full range, and Level III consulting covers procedures and report review.
Frequently asked questions
Is radiographic testing available from Atlantis in Pittsburgh?
No. Atlantis does not perform radiographic testing in the United States, because industrial radiography is licensed under NRC rules or Agreement State rules. Instead, Atlantis supplies ultrasonic testing, Level III review of radiographs, and RT theory training.
Can ultrasonic testing replace radiography on my Pittsburgh weld?
Sometimes, where the construction code and owner allow it. ASME B31.3, API 1104 and AWS D1.1 have ultrasonic provisions, and ASME Section VIII allows it only under specific conditions. The owner, the design engineer and the authorized inspector have to sign off on any switch before the work is scoped.
Can you review radiographs taken by another company?
Yes. An ASNT Level III can review film or digital images and the technique sheets against ASME Section V Article 2 and the construction code, and give a second read on any disputed indication. No radiation source is involved.
Can you review an RT contractor's procedure or written practice?
Yes. A Level III review checks the procedure against the code, the technique sheet content, image quality indicators and the written practice for personnel qualification, so gaps are found before the contractor starts work.
Do you teach radiographic testing?
Atlantis teaches a Level 2 theory course for RT under SNT-TC-1A. It does not replace radiation safety training or a radiographer license, which are separate legal requirements handled by the licensed radiography employer.
Inspection and training around Pittsburgh
- Ultrasonic testing (UT) in Pittsburgh
- Magnetic particle inspection (MT) in Pittsburgh
- Liquid penetrant testing (PT) in Pittsburgh
- NDT inspection services in Pennsylvania
Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Pittsburgh technicians.
Need a weld examined in Pittsburgh?
Send the drawing or weld list, the material and thickness, and the code you work to. We will tell you whether ultrasonic testing can be used in place of radiography for that work, or quote a Level III review of radiographs you already have. Ask about UT or a radiograph review for Pittsburgh.