Radiographic Testing (RT) Support in Philadelphia, Pennsylvania

Atlantis NDT does not perform radiographic testing in the United States, including Philadelphia. Industrial radiography is a licensed activity: the Nuclear Regulatory Commission sets the federal rules in 10 CFR Part 34, and Pennsylvania, an Agreement State, administers equivalent radiation protection rules through its own state program. Atlantis holds no source license and does not offer to expose or interpret film as a radiography contractor. This page explains what we can do for a Philadelphia owner who searched for RT.

Why radiography is not part of our Philadelphia services

Radiography requires sealed gamma sources or X-ray equipment, trained and licensed radiographers, security for the source, controlled exclusion areas and a radiation safety program. Those obligations sit with the licensee. A company without that license cannot lawfully provide the service, and Atlantis chooses not to claim it. If your contract requires radiography, the owner or engineer should select a licensed contractor against the specification and verify the license before mobilization.

Ultrasonic testing as a volumetric alternative in Philadelphia

Where the construction code and the owner permit, ultrasonic examination can stand in for radiography when the question is weld volume. ASME B31.3 and API 1104 provide for ultrasonic examination of production welds, AWS D1.1 sets ultrasonic acceptance criteria for groove welds, and ASME Section VIII allows it in place of radiography only under specific conditions. The substitution is agreed with the owner, the engineer and, on code work, the authorized inspector, before the job starts.

When that agreement is in place, Level II technicians travel to your site and perform shear wave examination to a procedure approved by an ASNT Level III. Read about ultrasonic testing in Philadelphia and our national UT service. Surface checks on the same weld are available through magnetic particle inspection and liquid penetrant testing, and the state hub, NDT inspection services in Pennsylvania, lists wider coverage.

Level III review of radiographs and RT documents

Review work uses no radioactive source and needs no radiation license. Atlantis founder Anoop Rayavarapu is ASNT NDT Level III in UT, RT, MT, PT and VT, and can support Philadelphia owners with:

Send the images and the governing code through this radiograph review request and we reply within one business day. For program help, see Level III consulting and written practice development.

Radiography theory training

Teams who need to understand radiography can study the principles, image quality and interpretation in our RT Level 2 course. The course does not license anyone to operate sources, and certification remains with the employer under its written practice built on ASNT SNT-TC-1A.

Planning with Atlantis in Philadelphia

Atlantis keeps no office in Philadelphia. Technicians are mobilized from outside the city for inspection scopes, and radiograph review is done remotely from the images you send. Share the metal, wall thickness, governing code and the radiography clause in your contract, and the reply will state plainly which parts fall inside our scope.

Frequently asked questions

Why does Atlantis not perform radiographic testing in Philadelphia?

No. Atlantis does not perform radiographic testing in the United States, because it is licensed under NRC rules in 10 CFR Part 34 or equivalent Agreement State rules, and we do not offer it.

Can ultrasonic testing replace radiography on my Philadelphia weld?

In some cases. Pipeline, process piping and structural codes each set their own ultrasonic provisions, and pressure vessel rules allow the swap only under defined conditions, so agree it with the owner, engineer and authorized inspector first.

Can an ASNT Level III review radiographs made by someone else?

Yes. A Level III can review radiographs and technique sheets against ASME Section V Article 2 and the construction code, and provide a second read on disputed indications. No radiation license is needed for review.

Do you teach radiography?

The RT Level 2 course covers theory only: image quality, exposure principles and interpretation. Completing it does not authorize anyone to run sources, and qualification still comes from the employer.

How do I ask for a radiograph review in Philadelphia?

Use the review request link on this page, attach images or describe the code and weld, and we reply within one business day with whether the review fits our scope.

Inspection and training around Philadelphia

Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Philadelphia technicians.

Need a weld examined in Philadelphia?

Send the drawing or weld list, the material and thickness, and the code you work to. We will tell you whether ultrasonic testing can be used in place of radiography for that work, or quote a Level III review of radiographs you already have. Ask about UT or a radiograph review for Philadelphia.