NDT Inspection Management ERP in Monterrey — Certification, Calibration and Work Orders in One System

Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in Monterrey, Mexico. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one fully customized platform with 30+ business apps behind it.

Modules inspection companies actually switch for

Integrations

Atlantis ERP has an open REST API, so it connects to SAP, Maximo, NetSuite or any other system that accepts API connections; each integration is scoped with you during implementation.

Frequently Asked Questions

Does Atlantis NDT ERP suit an inspection company based in Monterrey?

Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with expiry warnings and blocked double-booking, equipment calibration due-date control, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for Mexico are configured during onboarding rather than sold as an add-on module.

How long does implementation take for a mid-size Monterrey inspection contractor?

A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.

Can it replace the spreadsheets we use for technician certification and equipment calibration?

That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and each certificate carries a computed status, with 90-day expiry warning tasks, email alerts, timesheet warnings and blocked double-booking. Equipment calibration is tracked the same way — due dates on every flaw detector, thickness gauge and reference block raise warnings before they lapse. That removes the two failure modes that most often cost inspection firms a client audit.

See it on your own workflow

Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.

Related: Atlantis NDT ERP · NDT inspection software · inspection management software · Digital Twin in Monterrey · NDT reporting software.

The Monterrey NDT services market, from the provider's side

Monterrey and the Nuevo León industrial belt combine steelmaking, heavy metal fabrication, automotive assembly and one of Mexico's main appliance clusters, with a Pemex refinery at Cadereyta and nearly all exports moving tariff-free to the United States and Canada under the USMCA.

Inspection work runs from mill maintenance and new-plant construction at the Ternium complex to weld and component examination for automotive and appliance suppliers, pressure-equipment testing under Mexican workplace rules, and refinery scope at Cadereyta. For the companies doing this work, the operational load concentrates around the Ternium complex at Pesquería, the Kia assembly plant in the same municipality, the appliance plants around Apodaca, and the Cadereyta refinery — and the back office that keeps crews certified, equipment calibrated and reports moving is what decides which providers grow.

Where inspection companies serving fab shops lose margin

Fabrication-shop NDT is high-volume, code-driven and unforgiving on documentation: weld maps, technique sheets, acceptance criteria to AWS or ASME, and a report the shop needs before it can ship. The inspection company that turns reports around fastest gets the next call, which is why NDT reporting software — templates matched to the governing code, findings captured once in the shop and flowing straight into the deliverable — is a competitive weapon and not an admin convenience.

Shop work also produces a scheduling texture unlike plant outages: many small jobs, short notice, same-week turnarounds. Work order management that shows which technicians hold the right stamps and who is actually free beats a whiteboard the moment a company runs more than one crew, and job-level costing shows which shop accounts pay for the relationship and which quietly consume it.

What an ERP built for NDT companies covers in Monterrey

Shop-driven markets like Monterrey live on turnaround speed, and Atlantis is built so the report is a by-product of the work rather than a second job — NDT inspection software plus the commercial spine:

Certification and personnel tracking. Every technician's methods, levels, expiry dates, eye-exam currency and Written Practice records under SNT-TC-1A or CP-189 — with the audit view a client's quality department expects, ready before they ask.

Equipment and calibration management. The instrument register with calibration due dates, certificates attached, and traceability that satisfies ISO 17025-minded reviewers — so nothing leaves the shop out of date.

Work order and crew scheduling. Who is qualified, who is available, what the job needs — matched in one view, from a single technician call-out to a full turnaround mobilisation.

NDT reporting. Findings captured once — in the field or the shop, offline if needed — flowing into code-referenced report templates, so the deliverable ships while the competitor is still retyping field sheets. This is the inspection management software layer clients actually see.

Quoting, invoicing and job costing. Hours, equipment and consumables tied to each work order as they happen, so every job shows its true margin and the next bid learns from the last one.

Cloud-based, mobile in the field, and fully customizable to how your operation already works. See the NDT inspection software platform · the full business management suite · talk to us about Monterrey.

Frequently asked questions

Does Atlantis understand how Monterrey inspection companies operate?

The platform is built by ASNT Level III practitioners around the workflows above — certification tracking, calibration, field data capture, code-referenced reporting — rather than adapted from generic field-service software. Regional specifics like the client mix around the Ternium complex at Pesquería, the Kia assembly plant in the same municipality, the appliance plants around Apodaca, and the Cadereyta refinery shape configuration, not custom development.

Can we keep our existing report formats and client requirements?

Yes — report templates, client-specific deliverables and your Written Practice structure are configuration. The system adapts to how you already serve your clients; switching software should never mean renegotiating what your clients receive.

Related: why inspection companies replace spreadsheets · NDT ERP vs generic ERP · compared with NetSuite.

Monterrey: a steel-and-assembly economy inspecting to two countries' expectations

Ternium is building a new steel shop at its Pesquería complex that pairs direct-reduction ironmaking with an electric arc furnace, well advanced and due to feed slabs to the hot strip mill on the same site, replacing much of the slab now shipped in from the company's Brazilian operations. Kia's Pesquería plant assembles compact cars for export to dozens of countries, and the state's appliance cluster includes Whirlpool, Mabe, Carrier and Trane Technologies. The base is also shifting: Whirlpool is gradually closing its Supsa refrigerator plant in Apodaca and moving that production to Ramos Arizpe in Coahuila, while keeping its other facilities on the Apodaca campus.

Energy work brings a different authority and a different temperament. Pemex's Cadereyta refinery is a federal installation, and after odour complaints across the metro the state environment secretary met Pemex executives and the federal safety, energy and environment agency, ASEA, inspected the plant, with federal and state emissions monitoring to follow. Refinery scope there runs to Pemex specifications under federal oversight, while the steel, automotive and appliance plants answer to their customers' quality systems and to Mexican workplace-safety rules for their boilers and pressure vessels. Fabricators building equipment for US buyers frequently examine to ASME and AWS D1.1 acceptance criteria on the same shop floor where domestic work follows Mexican norms.

For an inspection company in Monterrey, the job is serving two countries' expectations at once. Reports often need to exist in Spanish for the plant and the labour authority and in English for a US customer's supplier-quality team; personnel evidence may have to satisfy an employer-based written practice demanded by an export customer as well as the certified-personnel requirement in Mexican pressure-equipment rules; and the USMCA review keeps export manufacturers alert to anything that could slow a shipment north. Producing bilingual deliverables from one set of field data, with each technician's qualifications mapped to the scheme each client recognises, removes a layer of rework that otherwise eats the margin on short-turnaround fabrication jobs.

Regulation and certification for inspection work in Monterrey

Pressure equipment in Mexican workplaces is governed by NOM-020-STPS, enforced by the Secretaría del Trabajo y Previsión Social. It covers pressure vessels, cryogenic vessels and boilers, sorts them into categories by pressure, volume and fluid hazard, and requires employers to keep an up-to-date equipment list, a file for each unit, revision and maintenance programmes, and operating, inspection and maintenance procedures in Spanish. Higher-category equipment must be pressure-tested or examined by non-destructive methods at set intervals, using at least one volumetric method such as radiography, ultrasound or acoustic emission together with a surface or leak method, and for the highest category the tests are witnessed by an accredited and approved unidad de verificación. Hydrocarbon installations such as the Cadereyta refinery add oversight from ASEA, the federal safety, energy and environment agency.

On personnel, NOM-020-STPS requires that non-destructive examination be performed and its results endorsed by certified personnel with the technical capacity and experience to perform, supervise, interpret and evaluate it, referring to a Mexican qualification standard or an equivalent. Inspection suppliers to export manufacturers may meet that through an employer-based SNT-TC-1A programme recognised by their US customers, through third-party certification under the ISO personnel standard, or both, with the client's specification usually deciding. The platform keeps the evidence each route needs — written practice, levels by method, training and experience records, third-party certificates and expiry dates — alongside the equipment files and verification-unit reports a NOM-020-STPS review looks for. It records whichever scheme the company relies on; it does not certify personnel.