NDT Inspection Management ERP in Casablanca — Certification, Calibration and Work Orders in One System
Atlantis NDT ERP is inspection-management software for NDT service companies, inspection contractors and QA departments operating in Casablanca, Morocco. It replaces the spreadsheet stack most inspection businesses run on: technician certification currency, equipment calibration control, inspection scheduling, multi-crew work orders, client asset registers, job costing and audit-ready document retention — on one fully customized platform with 30+ business apps behind it.
The Casablanca market this is configured for
Casablanca is the industrial capital of Morocco, with the Mohammedia Refinery (formerly SAMIR, currently mothballed but with potential reactivation) and the OCP Group (the world's largest phosphate exporter) operating massive industrial assets at Jorf Lasfar, Safi, and Khouribga. The Tanger Med port and the Renault-Nissan, Stellantis (PSA), and Boeing supply-chain manufacturing at Tangier and Casablanca drive aerospace and automotive NDT demand. The Office National des Hydrocarbures et des Mines (ONHYM) and the Office National de l'Électricité et de l'Eau Potable (ONEE) oversee energy compliance. Morocco's strategic shift to renewables — including the Noor solar complex — and the green hydrogen partnership with European customers create new asset classes ideally captured in digital twins.
Industries served from Casablanca
- Phosphate Processing (OCP)
- Automotive Manufacturing
- Aerospace Supply Chain
- Renewable Energy
What Casablanca inspection companies get out of it
Local use cases
- OCP Group Jorf Lasfar and Safi fertiliser-complex pressure-equipment inspection with IMANOR-format evidence export.
- Renault Tanger Med and Stellantis Kenitra automotive-supplier weld and NAS 410 currency tracking.
- Boeing/Airbus/Safran/Hexcel Casablanca Nouaceur aerospace-supplier NADCAP audit-pack export alongside trilingual Arabic/French/English documentation.
Compliance and client-audit frameworks
- AMSSNuR (nuclear/radiological safety)
- IMANOR
- CNSS
- ISO 9712
- Personal Data Protection Law 09-08
Modules inspection companies actually switch for
- Certification tracking — SNT-TC-1A / ISO 9712 / NAS 410 currency with computed status, 90-day expiry warning tasks, email alerts and blocked double-booking.
- Calibration management — instrument, block and probe calibration intervals with ISO 17025 traceability chains.
- Work order management — multi-crew, multi-site dispatch with mobile offline field capture.
- Document control — procedures, written practices and technique sheets under ISO 9001 revision control.
- Asset management — NDT equipment by serial number with issue, return, calibration and maintenance history.
Integrations
Atlantis ERP has an open REST API, so it connects to SAP, Maximo, NetSuite or any other system that accepts API connections; each integration is scoped with you during implementation.
Frequently Asked Questions
Does Atlantis NDT ERP suit an inspection company based in Casablanca?
Yes. The platform ships pre-configured for inspection and testing businesses — ASNT SNT-TC-1A and ISO 9712 certification tracking with expiry warnings and blocked double-booking, equipment calibration due-date control, work-order routing across multiple crews and sites, and client-ready reporting. Regional settings, currencies, tax treatment and language for Morocco are configured during onboarding rather than sold as an add-on module.
How long does implementation take for a mid-size Casablanca inspection contractor?
A typical 20–60 technician inspection business goes live in 6–10 weeks: week 1–2 discovery and data migration mapping, week 3–5 configuration of certification, calibration and work-order modules, week 6–7 pilot with one crew and one client contract, week 8–10 rollout and training. Historic certification records, calibration certificates and client/asset registers are migrated from spreadsheets or the incumbent system as part of the implementation.
Can it replace the spreadsheets we use for technician certification and equipment calibration?
That is the most common reason inspection companies adopt it. Every technician's method-level qualification, vision-exam date, practical and general exam records and on-the-job hours sit against a written practice, and each certificate carries a computed status, with 90-day expiry warning tasks, email alerts, timesheet warnings and blocked double-booking. Equipment calibration is tracked the same way — due dates on every flaw detector, thickness gauge and reference block raise warnings before they lapse. That removes the two failure modes that most often cost inspection firms a client audit.
See it on your own workflow
Free 30-minute walkthrough using your actual job types, certification matrix and client reporting formats. Affordable, accessible, fully customizable — request a demo and tailored quote.
Related: Atlantis NDT ERP · NDT inspection software · inspection management software · Digital Twin in Casablanca · NDT reporting software.
Built for any business that runs on operations
Most companies do not fail at their craft. They lose time, margin and goodwill in the gaps between the tools they use to run the place — a quoting spreadsheet that does not talk to the job sheet, a job sheet that does not reach accounts, and a compliance folder nobody can search when a client asks. Atlantis closes those gaps by putting the whole operation on one platform, so information is entered once and everything downstream stays in step.
What you can run on it
- Sales and CRM — leads, quotes, follow-ups and the pipeline that tells you what next month looks like.
- Projects and job costing — plan the work, track the hours and materials against it, and see the margin while the job is still live rather than at final account.
- Field and service teams — dispatch, schedules, mobile capture that works with no signal, and sign-off from site.
- Inventory and purchasing — stock, suppliers, reorder points and goods receipt, joined to the jobs that consume them.
- People — records, qualifications and licences with renewal reminders, timesheets, leave and payroll.
- Quality and documents — procedures and forms under revision control, with the audit trail an inspection or accreditation body actually asks for.
- Accounts — invoicing, expenses, multi-currency and the reporting your accountant stops chasing you for.
Affordable, accessible, fully customizable — and we mean each word
Affordable because the whole suite is included rather than sold to you a module at a time, and because implementation is done by people who have run operations rather than by a chain of subcontractors. Accessible because it runs in a browser and on a phone, works for a small team on day one, and does not need a specialist on staff to keep it alive. Fully customizable because your process is the thing that makes you competitive — the software should bend to it, not the other way round.
Industries we configure for
Service businesses and contractors, manufacturing and fabrication, trading and distribution, laboratories and testing houses, engineering consultancies, construction and facilities, and asset owners across energy, marine, aerospace and infrastructure. Inspection and testing is where we started, and it remains the sector we go deepest in — but the platform underneath is general-purpose, and most of what it does has nothing to do with inspection at all.
What happens when you get in touch
A short conversation, not a sales sequence. We ask how the business runs today and where it hurts, show you the platform doing that work, and send a written quote shaped to your region, your team size and the scope you actually need. No obligation, nothing to install first, and no pressure to decide on the call. Reach out and tell us what you are trying to fix.
Related: business management platform · inspection management software · choosing the right category of software · modules · by industry · asset integrity platform. Book a free consultation.