NDT Level III Consulting & Training in South Carolina
Atlantis NDT provides ASNT Level III consulting and NDT training across South Carolina, led by an ASNT NDT Level III, for Boeing 787 assembly, Duke Energy nuclear fleet, Savannah River Site, BMW Spartanburg. Serving Charleston, North Charleston, Columbia, Aiken, Spartanburg and all South Carolina locations.
Industries in South Carolina
Level III-led support for Boeing 787 assembly, Duke Energy nuclear fleet, Savannah River Site, BMW Spartanburg. Procedure, written-practice and report review can run remotely; onsite visits anywhere in South Carolina are scheduled after a scoping call.
NDT Training in South Carolina
ASNT SNT-TC-1A-based Level I, II and III training, self-paced online with ASNT Level III support, with practicals in the Practical NDT simulator and in person at your facility. Your company certifies its technicians under its written practice.
What an outsourced ASNT Level III actually does
Most inspection companies do not need a full-time Level III; they need the functions a Level III performs. Those are specific and separable: authoring and signing the written practice, developing and qualifying procedures for each method offered, examining and certifying Level I and Level II personnel, validating techniques and equipment, and being available and named when a client audits the programme. Engaged as a retained service, that covers the technical accountability without carrying the salary.
Service lines
- Written practice authoring and revision to ASNT SNT-TC-1A, ANSI/ASNT CP-189 or ISO 9712, including the annual review most quality systems require and few actually perform
- Procedure development and approval across UT, PAUT, TOFD, RT, MT, PT, ET and VT, written against the governing construction or in-service code and qualified on representative specimens
- Personnel qualification and certification — general, specific and practical examinations, vision examination administration, and the experience-hour records that support them
- Inspection-data review and NDT method selection that give your RBI engineers measured corrosion rates rather than default rates
- Flaw characterisation and sizing procedures (PAUT, TOFD) that meet the data requirements of your fitness-for-service engineers
- ISO 17020 and ISO 17025 accreditation support, internal audit and pre-assessment against the standard the assessor will actually apply
- Failure investigation, root-cause analysis and independent technical review where a finding becomes contentious
Codes and client regimes covered
ASME Section V, Section VIII and Section IX; ASME B31.1 and B31.3; AWS D1.1 and D1.5; API 510, API 570, API 653, API 577, API 578 and API 1104; ISO 17635, ISO 17636 and ISO 17640; NACE/AMPP MR0175 and MR0103 for sour service. Operator-specific approvals — Aramco, ADNOC, QatarEnergy, KOC, PETRONAS, Shell and similar — are prepared against the client's own vendor-qualification checklist rather than a generic template.
How engagements are structured
Turnaround for a procedure review or written-practice update is agreed in the proposal against your audit or contract date. Larger scopes, such as building a multi-method programme from nothing or preparing for a customer or accreditation audit, are scoped individually with a defined deliverable list. Work runs per-project or on retainer, and a retainer is usually the better arrangement once a company is being audited by more than one client.
What tends to be found first
- A written practice that has not been reviewed since it was adopted, and no longer matches how the crews work
- Technique sheets circulating in several uncontrolled versions beneath a controlled procedure
- Certification records complete for the certificate but missing vision examinations or documented on-the-job hours
- Calibration certificates held for instruments but not for probes, wedges and reference blocks — the most common ISO 17025 finding
- No way to reconstruct which procedure revision applied to an inspection performed two years ago
Related: NDT consulting services · ASNT Level III consulting · inspection management software · NDT training. Request a consultation in South Carolina.
Part of NDT consulting in the USA and the wider NDT consulting practice at Atlantis NDT.
Outsourced NDT Level III support in South Carolina: aerospace suppliers and industrial employers
In South Carolina, a large share of outsourced NDT Level III work comes from the aerospace supply chain around Boeing's 787 plant in North Charleston and Toray's composite materials site in Spartanburg. Industrial fabricators and inspection companies that run SNT-TC-1A programs add the rest. Atlantis, based in Houston, provides ASNT NDT Level III consulting through remote document review and scheduled site visits.
The aerospace chain. Boeing moved all 787 production to North Charleston in 2021. Before that, the plant was already the only one building the 787-10. Toray Composite Materials America supplies Boeing with intermediate-modulus, toughened carbon fiber prepreg for primary structure, and its Spartanburg site was set up to combine precursor, fiber and prepreg production in one plant. Machine shops, composite fabricators and assembly suppliers selling into that chain usually face two requirements. The first is Nadcap NDT accreditation, audited against AC7114 and method checklists such as AC7114/1 for penetrant, AC7114/3 for ultrasonic and AC7114/4 for film radiography.
What Atlantis does, and what it does not. Atlantis's ASNT NDT Level III covers UT, RT, MT, PT and VT. It writes and revises SNT-TC-1A written practices, develops and approves procedures and technique sheets, sets and grades Level I and II examinations under the employer's written practice, audits programs, and approves subcontractors. Before a Nadcap audit, it can review procedures, calibration and personnel records against the checklist the auditor will use. Atlantis provides ASNT NDT Level III consulting and is not a certification body or an accreditation body. Those limits are stated in every proposal, so a supplier knows exactly whose name goes on which document.
Industrial employers. Outside aerospace, the typical South Carolina client is a fabricator or inspection company working to ASME Section V and VIII and AWS D1.1. It needs one dependable Level III instead of a full-time hire. The first review usually finds the same few problems. The written practice no longer matches how the crews work, vision examinations or on-the-job hours are missing from certification files, and nobody can say which procedure revision applied to a job from last year.
- SNT-TC-1A written practice: authoring, annual review and revision control
- Method procedures and technique sheets, including composite UT for aerospace parts
- Level I and II examinations administered under the employer's own written practice
- Pre-audit review against Nadcap AC7114 checklists
- Certification and calibration records held in the ERP certificates app
Next steps. The full consulting scope is on outsourced NDT Level III consulting, procedure work is on NDT procedure development, and program setup is on SNT-TC-1A program setup. The aerospace-specific rules are explained on aerospace NDT consulting, and Upstate support is covered on NDT consulting in Greenville. Technician courses are on NDT training in South Carolina. To start, send your written practice and audit date through the South Carolina consulting enquiry.