Magnetic Particle Inspection (MT) in Richmond, Virginia
Atlantis NDT performs magnetic particle inspection (MT, also known as mag particle testing or MPI) for Richmond and central Virginia owners and fabricators. Typical scopes include welds on carbon and low-alloy steel, structural connections, lifting gear, shafts and pins, and repair welds on pressure equipment. Technicians travel to your site for the agreed scope. Send the component list and acceptance basis through the MT quote form and we reply within one business day.
Where magnetic particle inspection is used in Richmond
Richmond's industrial mix leans toward fabrication and process manufacturing. The metro area has dozens of fabricated-metal firms working in structural steel, plate and rebar, alongside paper and packaging mills, chemical producers and food and beverage plants. Each of those businesses welds and maintains steel structures, and each has components where a surface crack matters: hoist frames, crane runways, mixer and agitator shafts, press and conveyor parts, tank attachments and the lugs and brackets that carry equipment loads.
Transportation steel is another large field. Interstate corridors, river crossings and rail lines pass through the region, and heavy trucks, trailers and rail equipment need periodic checks of welded frames and couplings. At the Richmond Marine Terminal, handling equipment and rigging operate near the James River, and the steel is exposed to weather and fatigue. MT fits all of these because it is quick, portable and sensitive to fine cracks in ferromagnetic material.
What MT finds and what it misses
The technician induces a magnetic field in the part. Where a surface-breaking crack or a near-surface discontinuity interrupts that field, flux leaks out and fine ferromagnetic particles collect along the flaw, outlining its length and shape. MT is well suited to fatigue cracks at weld toes, quench or grinding cracks, laps and seams in forgings, and cracks that start at keyways, threads and fillets.
It can only be applied to ferromagnetic steel, including carbon steel, low-alloy steel and martensitic or ferritic stainless grades. Austenitic stainless steel, aluminum, copper alloys and nickel alloys are outside its reach, and those parts go to PT in Richmond. Coatings thicker than a thin paint film reduce sensitivity, deep subsurface flaws are not shown, and a crack running along the field direction is nearly invisible, so the field must be applied in two orientations at each area.
Codes, Virginia requirements and acceptance
MT technique follows ASME Section V Article 7, summarized in our Article 7 guide, along with ASTM E709 as a guide and ASTM E1444 as a practice. Acceptance depends on the job: ASME Section VIII Division 1 Appendix 6 for vessels, ASME B31.1 for power piping, ASME B31.3 paragraph 344.3 and Table 341.3.2 for process piping, AWS D1.1 for structural steel, AWS D1.5 for bridge steel and the owner's own specification where one exists.
The Virginia Department of Labor and Industry administers the state's boiler and pressure vessel safety program. Equipment must be built to ASME rules and registered with the National Board and the state, and operating rules are set out in Title 16, Agency 25, Chapter 50 of the Virginia Administrative Code. Inspection is performed by commissioned insurance company inspectors, contract fee inspectors and owner-user inspectors. Repairs follow the National Board Inspection Code, and an MT report on a repair weld can form part of the record those inspectors review.
How the work is carried out
Weld areas are cleaned of slag, spatter, scale and oil, and loose paint is removed. For most field jobs, the technician places an electromagnetic yoke across the weld and adjacent base metal, applies the particles and watches for indications as the field is energized, then repeats at roughly right angles. Before use, a yoke is proven by a lifting check: ten pounds for an alternating-current yoke at the pole spacing in use, forty pounds for a direct-current or permanent-magnet type, and field direction is verified with an indicator.
Dry powder works well on rough, warm surfaces and on welds in the field. Wet particles, whether in visible color or fluorescent, give higher sensitivity on clean machined surfaces. Fluorescent particles need subdued light and a UV-A source with a measured intensity. If the part will be welded, machined or placed in service next to sensitive equipment, it is demagnetized afterward and the residual field is checked.
Examining structural steel and bridge-type connections
Structural steel is often examined at connection welds, flange-to-web welds, lifting attachments and repaired areas. AWS D1.1 sets acceptance criteria for building and general structural welds, while AWS D1.5 covers steel bridges and is the specification most state transportation departments apply. MT is a common surface method under both, used to look at weld toes and end terminations where fatigue cracks tend to start.
Work at height raises access issues that decide whether a job is practical. A yoke needs a stable platform and an electrical supply or battery, and a technician working from a lift or scaffold must still see the indication clearly. The structure's owner provides access and lockout; we plan the equipment, visible or fluorescent particles and lighting to suit what the platform allows.
Shafts, pins and rotating equipment
Richmond's mills and plants run a great deal of rotating machinery, and rotating parts fail by fatigue. Agitator and mixer shafts, roll journals, press columns, crusher and conveyor pulleys, pump shafts and coupling hubs are classic MT subjects because cracks start at keyways, shoulders and thread roots where stress concentrates. A wet fluorescent examination on a clean, removed shaft is among the most sensitive routine tests available, and a shop can often set one up with a simple bench magnetizing unit and a UV-A lamp.
Field examination is possible when the part cannot be removed. A technician can use a yoke on an installed shaft end, taking care that the contact surface is clean and that nearby bearings and seals will not be harmed by residual magnetism. Where the shaft is important enough to schedule an examination, the owner should also decide in advance whether it will be demagnetized afterward, as stray fields attract steel debris to bearings and can disturb sensors.
Weld repairs on fabricated equipment
Fabrication shops and maintenance departments repair far more often than they build. When a crack is ground out of a frame, a tank attachment or a vessel nozzle, MT confirms that the excavation is clean before welding starts, and again on the finished weld after it has cooled to the temperature the procedure allows. That two-step habit prevents the expensive cycle of welding over a remaining crack tip and finding it again later.
Preheat and heat treatment need coordination with the examination. Dry particles tolerate somewhat warmer surfaces than wet carriers do, and the procedure states the highest temperature allowed. On pressure equipment, repairs and alterations follow the National Board Inspection Code, and the person authorized to accept the repair makes that decision. Our MT record is one piece of the documentation they review.
Preparing a component for MT
Good preparation shortens the job. Send a list of the items and where they are, the material grade, whether any are coated or galvanized and the surface temperature expected on the day. Let us know whether parts will be removed or examined in place, what power is available and whether the area can be darkened for fluorescent particles. If there is a customer or code procedure, send it, since our technicians work to the version you name. Early answers let us choose dry or wet particles, bring the correct yoke or bench unit and size the crew accurately.
Who performs the work
MT technicians are qualified under a written practice following ASNT SNT-TC-1A. The Level II technician chooses the technique, carries out the examination, interprets indications and writes the record. An ASNT Level III signs off the procedure and the reporting format. The company, not an outside body, issues the certification, as the recommended practice intends.
Where a Richmond owner has its own procedure or a code-specified one, we review and follow it. The Level III consulting service is available when a procedure needs to be written or checked against the code edition.
What the MT report contains
Each report identifies the item and location, the procedure and revision, the equipment and its last calibration, the particle type and carrier, the field direction and number of examinations, the surface condition and the technician and level. Indications are located and measured, described by shape and orientation and documented with photographs or sketches, then accepted or rejected under the named criteria. Parts that needed demagnetization record that it was done.
For repeat inspections of fatigue-sensitive parts, the report can map each face so that the next inspection compares like with like.
Planning an MT job in Richmond
Hot, humid summers make steel surfaces uncomfortable and wet particles dry too fast on sun-heated plate, while cool damp winter days can leave condensation on steel and slow particle mobility. Check the procedure's temperature range and the surface temperature before starting. Thunderstorms and humidity can interrupt outdoor work at plants, terminals and bridge approaches.
Plants usually require badging, safety orientation and permits. Hot-work and electrical rules often apply near flammable processes, and a mains-powered yoke or UV lamp may need approval. Indicate whether power is available, whether wet methods are allowed and whether darkness or a shroud can be arranged for fluorescent work. With I-95 and I-64 meeting in Richmond, travel for a mobilized crew is straightforward, but outage seasons book early.
MT, PT or UT for your Richmond job
Choose MT for fast, sensitive crack detection on carbon and low-alloy steel. Choose PT for non-magnetic metals and awkward shapes. Choose UT in Richmond for wall thickness and the interior of welds. A common sequence is UT to check thickness, MT on the final weld surface. Our MT versus PT comparison explains the choice in more detail, and the national MT page gives an overview.
Training your own MT technicians
Companies that want MT skills in house can begin with MT Level 1 training and move to MT Level 2 training. Atlantis provides the instruction and your company certifies under its own written practice. See the Richmond training page for how classroom theory and practice at your facility combine.
Frequently asked questions
What is MT inspection used for in Richmond?
It finds surface and near-surface cracks in carbon and low-alloy steel, such as weld toes on structural steel, crane and hoist parts, shafts and pins, trailer and rail frames, and repair welds on pressure equipment.
Which metals cannot be inspected by magnetic particle testing?
Austenitic stainless steel, aluminum, copper alloys and nickel alloys cannot be magnetized well enough for particles to collect, so dye penetrant inspection is the standard surface method for those metals.
Can MT be used on painted steel?
Thin, well-bonded paint can be examined through if the procedure allows it, though sensitivity drops as the coating gets thicker. Heavy or flaking coatings are removed locally before the examination.
Do you use wet or dry particles?
It depends on the surface and conditions. Dry powder suits rough or warm field welds, while wet visible or fluorescent particles give better sensitivity on clean, smooth parts. The procedure states the choice.
Why is the part magnetized in two directions?
A crack is found best when it crosses the magnetic field. Applying the field in two roughly perpendicular directions means cracks of any orientation are examined.
Which code sets the MT acceptance criteria in Virginia?
The construction code or contract does: ASME Section VIII Division 1 Appendix 6, ASME B31.1 or B31.3, AWS D1.1 or D1.5, or the owner's specification. Virginia's boiler rules require ASME construction for covered equipment.
How do I request an MT quote for a Richmond job?
Use the quote form to describe the steel, the number of items, the governing code and when access is possible. Our reply, within one business day, either asks follow-up questions or sets out a scoped quotation for a mobilized crew.
Does Atlantis have a Richmond office or lab?
No. Atlantis has no office in the city. Technicians travel to your plant or fabrication shop, and badging, power supply and safety orientation are agreed with you before they are mobilized.
Do you demagnetize parts after MT?
When the procedure or a later operation requires it, yes. Residual magnetism can affect welding, machining and bearings, so the procedure states when demagnetizing is needed and the report records it.
Inspection and training around Richmond
- Ultrasonic testing (UT) in Richmond
- Liquid penetrant testing (PT) in Richmond
- Magnetic particle inspection services
MT by industry for Richmond: Pulp & Paper.
MT by job: Magnetic particle weld inspection · Magnetic particle inspection of lifting equipment · Magnetic particle inspection of castings and forgings · Magnetic particle inspection of structural steel and bridges.
Training your own technicians: MT Level 1 training · MT Level 2 training · NDT training for Richmond technicians.
Request an MT inspection quote for Richmond
Send the component and material, the quantity, the code or specification and the site address. We reply within one business day with the scope, the mobilization plan and a quote. Request a quote for magnetic particle inspection in Richmond.
Need magnetic particle testing (MT) done, or learned?
Atlantis provides magnetic particle testing (MT) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.