Eddy Current Testing (ET) Services in Saudi Arabia 2026 — ASNT Level III Led

Frequently Asked Questions

Why Saudi Arabia generates ET demand

The Kingdom concentrates the world's largest oil-processing infrastructure — Abqaiq, the export terminals, the Jubail and Yanbu industrial cities — alongside offshore fields in the Gulf and a build-out of new industries under Vision 2030 that all consume inspection.

Refinery exchanger bundles are examined with eddy current at every major turnaround — bobbin screening for wall loss across thousands of non-ferrous tubes, with array or rotating probes on the indications that matter.

Cracker and polymer plant exchangers carry large non-ferrous bundles where bobbin eddy current is the only practical way to establish tube condition inside a shutdown window.

Above-ground pipeline facilities — pump and compressor stations — bring exchanger and cooler bundles into eddy current scope alongside the mainline programme.

Offshore MT gives way to eddy current and ACFM where coatings must stay intact — weld toes on primary structure can be examined through paint, saving the blast-and-recoat cycle.

What typically gets examined

In practice that means ET work across gas-oil separation plants and stabilisation columns, Jubail and Yanbu process complexes, the East-West pipeline and terminals, offshore platforms, and IWPP power and desalination plant — with scope set by the damage mechanisms each asset actually runs, not by a standard menu.

Certification and acceptance in Saudi Arabia

Aramco engineering standards (SAES, SAEP) and SABIC specifications define most work: vendor approval is formal, procedures are approved against Aramco requirements before use, and inspector certification is verified — Aramco-approved Level IIs and IIIs are a named contractual requirement on many scopes.

Examinations themselves are performed to ASME Section V Article 8 and its tubing appendices, ISO 15548, and ASTM E243 for tube examination. The evidence chain — technician certification current on the day, instrument and reference block calibration, and the procedure revision in force — travels with every report, because that bundle is what an audit actually checks.

Working with Atlantis in Saudi Arabia

Atlantis delivers eddy current testing through inspection teams mobilised to site, working under Atlantis procedures with ASNT Level III oversight — we are straightforward that this is a mobilised model rather than a walk-in local office, because for planned inspection work that is usually the better arrangement anyway: the crew, procedures and equipment arrive matched to your scope. Read the ET service overview, see how results are recorded and retrieved, or tell us about the Saudi Arabia scope and we will respond with an honest view on mobilisation.

Saudi Arabia scopes are quoted from the national eddy current testing service: bobbin, array and rotating-probe tube inspection plus surface examination on non-ferrous and coated components.