Eddy Current Testing (ET) Services in Jubail 2026 — ASNT Level III Led

Why Jubail generates ET demand

Jubail is the largest industrial city in the world by petrochemical concentration: SABIC affiliate complexes side by side along the Royal Commission grid, the SATORP refinery, Marafiq's power and desalination utilities, and the fabrication yards that feed them all — a turnaround somewhere in Jubail nearly every month of the year.

Cracker and polymer plant exchangers carry large non-ferrous bundles where bobbin eddy current is the only practical way to establish tube condition inside a shutdown window.

Refinery exchanger bundles are examined with eddy current at every major turnaround — bobbin screening for wall loss across thousands of non-ferrous tubes, with array or rotating probes on the indications that matter.

Condenser and feedwater heater tubing is eddy current's core power-generation work — full-bundle screening each major outage with plugging decisions made tube by tube.

Material verification and sorting — mixed stock, heat-treat condition checks — bring eddy current into fabrication QA alongside dedicated weld techniques.

What typically gets examined

In practice that means ET work across crackers and derivative units across the SABIC complexes, SATORP refinery equipment, utility boilers and desalination plant, tank farms, and structural fabrication — with scope set by the damage mechanisms each asset actually runs, not by a standard menu.

Certification and acceptance in Jubail

Saudi Aramco SAES standards and contractor approval govern Aramco-linked work, while SABIC engineering standards run their own vendor and inspector approval for the affiliate plants; Royal Commission requirements sit over construction, and certification in practice means ASNT-based schemes with operator-specific endorsement.

Examinations themselves are performed to ASME Section V Article 8 and its tubing appendices, ISO 15548, and ASTM E243 for tube examination. The evidence chain — technician certification current on the day, instrument and reference block calibration, and the procedure revision in force — travels with every report, because that bundle is what an audit actually checks.

Working with Atlantis in Jubail

Atlantis delivers eddy current testing through inspection teams mobilised to site, working under Atlantis procedures with ASNT Level III oversight — we are straightforward that this is a mobilised model rather than a walk-in local office, because for planned inspection work that is usually the better arrangement anyway: the crew, procedures and equipment arrive matched to your scope. Read the ET service overview, see how results are recorded and retrieved, or tell us about the Jubail scope and we will respond with an honest view on mobilisation.

For the full scope — bobbin, array and rotating-probe tube inspection plus surface examination on non-ferrous and coated components — see eddy current testing, the national service page this Jubail work is delivered under.