Eddy Current Testing (ET) Services in Dallas 2026 — ASNT Level III Led

Atlantis NDT delivers professional Eddy Current Testing (ET) inspection services in Dallas from ASNT NDT Level II + III certified inspectors. Specialising in heat exchanger tube inspection, surface crack detection and conductivity testing. ET demand around Dallas comes mainly from aerospace, defense & manufacturing. Technicians are qualified to the governing SNT-TC-1A written practice, and procedures and reports are reviewed by an ASNT NDT Level III (UT, RT, MT, PT, VT). Where we work: nationwide. Technicians are mobilised to your site anywhere in the USA; apart from the Houston office there is no local office, so mobilisation is planned and quoted for each job.

Eddy Current Testing Method Overview

Eddy Current Testing (ET) is a core NDT method covered in detail at our ET pillar hub. Per ASME Section V, ASTM E-series, ISO 17635 + applicable method-specific standard. Atlantis NDT Level III approves every Procedure + signs off final disposition. Calibration block + reference standard traceable to NIST / NPL / PTB. Procedure pack + technique sheet + qualification block included.

Code Coverage and Personnel Certification

Delivery Model in Dallas

On-site mobilisation across North America, confirmed in your RFQ. Remote procedure authoring + ASNT NDT Level III sign-off. Hybrid model — local Level II + Atlantis Level III remote oversight — common pattern for multi-region EPC + asset-owner customers in Dallas.

Free Consultation + Tailored Quote

Atlantis NDT publishes no pricing — pricing varies by region + scope + delivery model. Request your free 30-minute consultation with Atlantis NDT founder Anoop Rayavarapu (ASNT NDT Level III in UT, RT, MT, PT and VT). Every job is quoted on request. Affordable, accessible, fully customizable. See also Eddy Current Testing pillar, Dallas ERP, Dallas training, Dallas consulting.

Frequently Asked Questions

Do you provide Eddy current testing services in Dallas?

Yes. Eddy current testing examinations in Dallas are performed to written procedures qualified against the governing code, by technicians certified for the method and level under ASNT SNT-TC-1A or ISO 9712, using instruments, probes and reference blocks with current calibration traceable under ISO 17025. An ASNT NDT Level III reviews and signs the final disposition.

How quickly can a crew mobilise?

Mobilisation depends far more on site access requirements than on crew availability — permits, inductions, client-specific approvals and, where radiography is involved, radiation-safety arrangements typically govern the schedule. Those requirements are confirmed at quotation stage so the timeline reflects reality rather than an optimistic assumption about gate access.

What do I receive at the end of the examination?

A report in your required format with indications located against the component and, where relevant, against a persistent corrosion monitoring location so trends stay continuous between campaigns; raw data in the instrument-native format plus an open export; and the procedure revision, technician certification state and instrument calibration status applicable at the time of examination — which is the bundle a client or accreditation audit asks for.

Can results be delivered into our own maintenance system?

Yes. Findings can be delivered as notifications or work orders into SAP PM, Oracle eAM, IBM Maximo or ServiceNow, or onto a 3D asset model where remaining life and risk-based inspection ranking update as new data arrives. The intent is that results land where your team already works rather than in a separate report archive.

Which code will the examination be performed to?

The code governing the item — ASME Section VIII for pressure vessels, ASME B31.3 for process piping, API 510, API 570 or API 653 in service, AWS D1.1 for structural steel, API 1104 for pipeline girth welds. The applicable code and edition are agreed before mobilisation and recorded against the examination so the disposition can be reconstructed later.

What Atlantis provides in Dallas is set out in full on the eddy current testing services page — bobbin, array and rotating-probe tube inspection plus surface examination on non-ferrous and coated components.

Every technician on the crew carries current ASNT/ISO 9712 certification from Atlantis NDT training and certification programs.

Eddy current testing in Dallas–Fort Worth: which assets get it and how to choose a supplier

Eddy current testing in Dallas–Fort Worth is used mostly on aircraft structure, on heat-exchanger and chiller tubing, and on conductive parts that need a fast surface-crack check without stripping paint. Atlantis sends ET technicians from Houston to sites across North Texas, works to a written procedure reviewed by an ASNT NDT Level III, and quotes each scope once tube material, access and the governing code are known.

Airframes and rotorcraft. Fort Worth carries most of the region's aerospace work. Lockheed Martin builds the F-35 at Air Force Plant 4, and Bell Textron, headquartered in Fort Worth, runs six manufacturing facilities around the Metroplex, including the Manufacturing Technology Center where the V-280 Valor and 360 Invictus were developed. On this kind of hardware ET means bolt-hole and fastener-row inspection, cracks at radii and edges, and conductivity checks that confirm the temper of aluminum parts after heat treatment or heat damage.

Airline maintenance. Southwest Airlines is headquartered in Dallas and keeps a multi-hangar maintenance base at Love Field for its Boeing 737 fleet, while American Airlines Group is headquartered in Fort Worth. In airline work the eddy current technique, frequency and reference standard come from the manufacturer's NDT manual and the carrier's FAA-approved maintenance program, so the inspector follows the task card rather than choosing a method on the day.

Power plants and buildings. North Texas generation includes Comanche Peak near Glen Rose, about 40 miles southwest of Fort Worth: two Westinghouse four-loop pressurized water reactors operated by Irving-based Vistra under NRC Region IV oversight and licensed to 2050 and 2053. Steam generator tube examination at a nuclear unit is a specialist program of its own. The more common commercial jobs are condenser, feedwater heater and lube-oil cooler bundles at gas-fired and industrial plants, and the water-cooled chillers in office towers, hospitals and campus central plants, where bobbin-probe ET of copper tubes finds pitting, support-plate wear and freeze damage before a tube leaks.

People searching for eddy current testing companies or ECT inspection services usually have a bundle or a part and a fixed outage date. These questions separate suppliers quickly:

  • Tube material: copper alloy, stainless and titanium tubes suit conventional bobbin ECT; carbon steel tubes need remote field testing, near-field testing or IRIS.
  • Reference standard: the calibration tube should match the material, diameter and wall of the tubes being tested, with the artificial flaws ASME Section V Article 8 calls for.
  • Cleaning and fill factor: bundles must be cleaned, usually by hydroblasting, so a probe of the right diameter will pass.
  • Analysis and data: who reads the signals, and whether you receive the raw data and a tube map, not only a summary sheet.

The method and its limits are explained on the eddy current testing page, and ferrous tubing that needs ultrasonic wall measurement is covered on the IRIS tube inspection page. For a complete outage scope that combines ET with UT, PT or visual work, start from NDT inspection services. Technicians who want to qualify in the method can take eddy current testing training and practice signal interpretation on the Practical NDT eddy current simulator. To scope a North Texas job, send the tube count, material, sizes and outage window through the Dallas–Fort Worth ET request.

Need eddy current testing (ET) done, or learned?

Atlantis provides eddy current testing (ET) as an inspection service, trains technicians in it, and lets teams practise it on the Practical NDT simulator.