Radiographic Testing (RT) Alternatives in Tulsa, Oklahoma
Atlantis does not perform radiographic testing in the United States, and that includes Tulsa. Industrial radiography is a licensed activity: the sources and X-ray equipment are regulated under Nuclear Regulatory Commission rules in 10 CFR Part 34, or the equivalent rules of the state where the work happens. It is not a service Atlantis offers here. This page sets out what a Tulsa owner can get from Atlantis if a specification or a search pointed to radiography.
Why Tulsa owners ask for radiography
Pipeline girth welds, refinery piping, pressure vessels and steel castings are often specified with radiographic examination, because an image gives a permanent record of volumetric flaws. Foundry buyers also grade castings against ASTM reference radiographs, and operators of gas and liquids lines call for RT on new construction. When the contract demands RT, the owner engages a licensed radiography contractor, and the licence holder, exposure plan and safety zone are that contractor's responsibility. Atlantis does not name or recommend one.
Ultrasonic testing as the volumetric alternative
Where the construction code and the owner allow, UT examines the full thickness of a weld without a radiation source. Paragraphs of ASME B31.3 and of API 1104 allow ultrasonic examination of production welds, and AWS D1.1 sets separate acceptance rules for ultrasonic work on groove welds. ASME Section VIII lets ultrasonic stand in for radiography under certain conditions only. Whoever proposes the substitution has to agree it with the owner, the engineer and, on code work, the authorized inspector before the work begins. Ultrasonic testing in Tulsa describes how that examination is performed.
ASNT Level III radiography review without a radiation licence
Reviewing radiography needs no source. An ASNT Level III can check radiographs, whether film or digital images, and technique sheets against ASME Section V Article 2 and the construction code. Typical engagements are a second read on disputed indications, an independent look at image quality, coverage and identification, and a review of an RT contractor's procedure and written practice before the work starts. The reviewer is the founder, Anoop Rayavarapu, who is ASNT NDT Level III in UT, RT, MT, PT and VT. See Level III consulting and written practice development.
Radiographic testing theory for your team
Employers building a radiography group can train technicians in theory through the radiographic testing Level 2 course. Hands-on exposure work happens under the licence of the employer or contractor and is separate from this training. The NDT training in Tulsa page lists local options, and the MT and PT pages describe the surface methods that Atlantis does carry out around Tulsa. The Oklahoma inspection services page gives the statewide picture.
Send a Tulsa review request with the radiographs or image files, the technique sheet, the code and edition the work was built to, and the acceptance criteria in the contract. With those in hand, the Level III can usually judge whether the images support the stated result and whether coverage and image quality meet Article 2. The outcome is a written review for your engineer or inspector to file with the project records.
How to start
If you need UT, MT or PT in Tulsa, or a Level III review of another contractor's radiographs, send the specification and the examination you need through the quote form. Atlantis has no office in Tulsa, so technicians are mobilized to your site for any on-site scope, and review work can often be done from the records. We reply within one business day.
Frequently asked questions
Can Atlantis do radiography in Tulsa?
No. Atlantis does not perform radiographic testing in the United States because the work is licensed under NRC or state rules. Ultrasonic, magnetic particle and penetrant inspection are available, along with Level III review of radiographs.
Can ultrasonic testing replace RT on a pipeline weld near Tulsa?
Only where the operator's specification and the code allow it. API 1104 and ASME B31.3 contain ultrasonic provisions, and the substitution has to be agreed with the owner, the engineer and the authorized inspector first.
Can a Level III review radiographs from another contractor?
Yes. An ASNT Level III can review film or digital images and technique sheets against ASME Section V Article 2 and the construction code, and can give a second read on disputed indications.
Does Atlantis train people in radiographic testing?
Radiographic testing Level 2 theory can be taken through Atlantis. Hands-on exposure work is done under the licence of the employer or contractor, and certification comes from the employer under its written practice.
Who handles radiography licensing in Oklahoma?
The licence holder, normally the radiography contractor, confirms whether the NRC or the state agency regulates the work. Atlantis does not name contractors, and this page does not replace advice from the licensing authority.
Inspection and training around Tulsa
- Ultrasonic testing (UT) in Tulsa
- Magnetic particle inspection (MT) in Tulsa
- Liquid penetrant testing (PT) in Tulsa
- NDT inspection services in Oklahoma
Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Tulsa technicians.
Need a weld examined in Tulsa?
Send the drawing or weld list, the material and thickness, and the code you work to. We will tell you whether ultrasonic testing can be used in place of radiography for that work, or quote a Level III review of radiographs you already have. Ask about UT or a radiograph review for Tulsa.