Radiographic Testing (RT) in Seattle: What Atlantis Offers Instead
Atlantis does not carry out radiographic testing anywhere in the United States, and that includes Seattle and Puget Sound. If you came here for radiography on a pipeline weld, a shipyard butt weld or a fabricated vessel, this page explains why we do not do it and what we can do: ultrasonic examination where the code and the owner permit it, and independent ASNT Level III review of radiographs made by a licensed contractor. Describe your Seattle scope and we reply within one business day.
Why radiography is not part of our United States services
Industrial radiography uses gamma sources or X-ray equipment, and in the United States it is a licensed activity. The Nuclear Regulatory Commission sets the base rules in 10 CFR Part 34, and Agreement States run their own equivalent programs. Washington is an Agreement State, with radioactive materials licensing handled by the state Department of Health. A company needs a license, certified radiographers, source security and exposure controls before it may expose a weld. Atlantis does not provide that service here. Seattle owners and contractors deserve a clear statement, so that nobody plans a job around a service we cannot lawfully deliver.
Ultrasonic testing as the volumetric alternative in Seattle
Behind most radiography requests is a simple question: does the weld have flaws inside? Ultrasonic testing answers it without a controlled exclusion area, which is a real advantage on crowded waterfront yards, in occupied refinery units and on terminal structures where clearing an area for exposure stops other trades. Production welds can be examined ultrasonically under provisions in ASME B31.3 and API 1104, groove welds under AWS D1.1 acceptance criteria, and ASME Section VIII Division 1 accepts UT in place of RT only under specific conditions.
The substitution has to be agreed with the owner, the engineer of record and, for code work, the authorized inspector before the job and written into the examination plan. Where it is agreed, ultrasonic testing in Seattle from Atlantis covers shear-wave weld examination to a written procedure, with the reference level and indication log in the report. Surface-breaking questions on carbon steel suit magnetic particle testing, and on aluminum or stainless penetrant testing.
ASNT Level III radiograph review, no radiation license needed
Looking at an image uses no source, so it needs no radiation license. A Seattle owner can have an ASNT Level III read radiographs, whether film or digital, alongside their technique sheets, measured against ASME Section V Article 2 and the construction code. The scope can add a second opinion on disputed indications, a check of image quality indicators and film density against the requirement, and a look at an RT contractor's procedure and written practice. The work is directed by Anoop Rayavarapu, ASNT NDT Level III in UT, RT, MT, PT and VT. Images stay with the contractor who produced them; we review what is sent and report our findings back to you.
It suits Seattle projects where an owner, a general contractor or a surveyor wants an independent opinion on radiography they did not witness, or where an acceptance call is contested. It does not replace the contractor's Level II interpretation. For help setting requirements for a radiography subcontractor, see outsourced Level III consulting.
Radiography training and written practice
If your Seattle team needs to understand radiography, the theory side is covered by the radiographic testing Level 2 course. Hands-on work with sources must still sit inside a licensed program run by the employer. We can also help you write or review the radiography section of an SNT-TC-1A written practice through written practice development. Seattle employers can read about NDT training in Seattle, and statewide inspection services are on the Washington inspection services page.
Frequently asked questions
Is radiographic testing available from Atlantis in Seattle?
No. Atlantis does not perform radiographic testing in the United States, because industrial radiography is licensed under NRC rules and Agreement State programs such as the one run in Washington. Ultrasonic testing and radiograph review are available instead.
Can ultrasonic testing replace radiography on my welds?
In some cases. Ultrasonic provisions sit in ASME B31.3, API 1104 and AWS D1.1, while Section VIII permits it in place of RT only under stated conditions. Owner, engineer and authorized inspector agree before work.
Can you review radiographs made by another contractor?
Yes. Film or digital images and technique sheets are read by an ASNT Level III against ASME Section V Article 2 and the construction code, including a second opinion on disputed indications. Images remain with the contractor.
Do you recommend a radiography contractor in Seattle?
No, radiography contractors are not named or recommended by us. What we can do is read the contractor procedure and the finished images, giving your acceptance decision an independent technical basis.
Where can my team learn radiography theory?
Theory is covered in the radiographic testing Level 2 course from Atlantis. Source work belongs inside a licensed program, and the employer written practice under SNT-TC-1A decides who is qualified.
Inspection and training around Seattle
- Ultrasonic testing (UT) in Seattle
- Magnetic particle inspection (MT) in Seattle
- Liquid penetrant testing (PT) in Seattle
- NDT inspection services in Washington
Training your own technicians: UT Level 1 training · UT Level 2 training · NDT training for Seattle technicians.
Need a weld examined in Seattle?
Send the drawing or weld list, the material and thickness, and the code you work to. We will tell you whether ultrasonic testing can be used in place of radiography for that work, or quote a Level III review of radiographs you already have. Ask about UT or a radiograph review for Seattle.