NDT Level III Consulting & Training in Michigan

Atlantis NDT provides ASNT Level III consulting and NDT training across Michigan. Our Houston-headquartered team of 50+ certified consultants specializes in automotive (GM, Ford, Stellantis), nuclear power, pipeline integrity. Serving Detroit, Grand Rapids and all Michigan locations.

Industries in Michigan

Our Level III consultants have direct experience in automotive (GM, Ford, Stellantis), nuclear power, pipeline integrity. We deploy ASNT-certified experts to any Michigan location within 24-48 hours.

NDT Training in Michigan

ASNT Level I, II, and III certification for all 6 major NDT methods. 95% first-time pass rate. Virtual and on-site options.

What an outsourced ASNT Level III actually does

Most inspection companies do not need a full-time Level III; they need the functions a Level III performs. Those are specific and separable: authoring and signing the written practice, developing and qualifying procedures for each method offered, examining and certifying Level I and Level II personnel, validating techniques and equipment, and being available and named when a client audits the programme. Engaged as a retained service, that covers the technical accountability without carrying the salary.

The Michigan asset base and what it demands

Michigan's heavy industrial base spans the Dearborn/Detroit corridor, where Cleveland-Cliffs' Dearborn Works integrated steel mill and Marathon Petroleum's Detroit refinery operate alongside Ford's Rouge manufacturing complex, plus DTE Energy's coal and gas-fired power generation fleet across the state. Automotive stamping and assembly plants run by Ford, GM, and Stellantis add large-scale structural steel and pressure equipment inventories that require ongoing integrity management under Michigan EGLE and OSHA oversight. Aging blast furnace shells, coke ovens, and refinery process units in the Detroit corridor carry decades of thermal cycling and corrosion history that digital twins help visualize alongside UT and RT inspection records. Statewide, the mix of legacy steelmaking, refining, and power generation assets makes a consolidated 3D digital-twin approach valuable for prioritizing capital and turnaround spend across the industrial base.

Service lines

Written practice authoring and revision to ASNT SNT-TC-1A, ANSI/ASNT CP-189, NAS 410 or ISO 9712, including the annual review most quality systems require and few actually perform
Procedure development and approval across UT, PAUT, TOFD, RT, MT, PT, ET and VT, written against the governing construction or in-service code and qualified on representative specimens
Personnel qualification and certification — general, specific and practical examinations, vision examination administration, and the experience-hour records that support them
Risk-based inspection programme design under API 580 and API 581, built on measured corrosion rates rather than default rates
Fitness-for-service assessment under API 579-1/ASME FFS-1 — Part 4 general metal loss, Part 5 local metal loss, Part 9 crack-like flaws
ISO 17020 and ISO 17025 accreditation support, internal audit and pre-assessment against the standard the assessor will actually apply
Failure investigation, root-cause analysis and expert-witness support where a finding becomes contentious

Codes and client regimes covered

ASME Section V, Section VIII and Section IX; ASME B31.1 and B31.3; AWS D1.1 and D1.5; API 510, API 570, API 653, API 577, API 578 and API 1104; ISO 17635, ISO 17636 and ISO 17640; NACE/AMPP MR0175 and MR0103 for sour service. Operator-specific approvals — Aramco, ADNOC, QatarEnergy, KOC, PETRONAS, Shell and similar — are prepared against the client's own vendor-qualification checklist rather than a generic template.

How engagements are structured

Most procedure reviews and written-practice updates are returned signed and stamped within two to five business days. Larger scopes — building a multi-method programme from nothing, preparing an ISO 17020 accreditation package, or standing up an RBI programme — are scoped individually with a defined deliverable list. Work runs per-project or on retainer, and a retainer is usually the better arrangement once a company is being audited by more than one client.

What tends to be found first

A written practice that has not been reviewed since it was adopted, and no longer matches how the crews work
Technique sheets circulating in several uncontrolled versions beneath a controlled procedure
Certification records complete for the certificate but missing vision examinations or documented on-the-job hours
Calibration certificates held for instruments but not for probes, wedges and reference blocks — the most common ISO 17025 finding
No way to reconstruct which procedure revision applied to an inspection performed two years ago