NDT Level III Consulting & Training in Hawaii

Atlantis NDT provides ASNT Level III consulting and NDT training across Hawaii, led by an ASNT NDT Level III, for Pearl Harbor Naval Shipyard submarine maintenance, Par Hawaii refining, military infrastructure. Serving Honolulu, Pearl City, Kapolei, Wahiawa and all Hawaii locations.

Industries in Hawaii

Level III-led support for Pearl Harbor Naval Shipyard submarine maintenance, Par Hawaii refining, military infrastructure. Procedure, written-practice and report review can run remotely; onsite visits anywhere in Hawaii are scheduled after a scoping call.

NDT Training in Hawaii

ASNT SNT-TC-1A-based Level I, II and III training, self-paced online with ASNT Level III support, with practicals in the Practical NDT simulator and in person at your facility. Your company certifies its technicians under its written practice.

What an outsourced ASNT Level III actually does

Most inspection companies do not need a full-time Level III; they need the functions a Level III performs. Those are specific and separable: authoring and signing the written practice, developing and qualifying procedures for each method offered, examining and certifying Level I and Level II personnel, validating techniques and equipment, and being available and named when a client audits the programme. Engaged as a retained service, that covers the technical accountability without carrying the salary.

Service lines

  • Written practice authoring and revision to ASNT SNT-TC-1A, ANSI/ASNT CP-189 or ISO 9712, including the annual review most quality systems require and few actually perform
  • Procedure development and approval across UT, PAUT, TOFD, RT, MT, PT, ET and VT, written against the governing construction or in-service code and qualified on representative specimens
  • Personnel qualification and certification — general, specific and practical examinations, vision examination administration, and the experience-hour records that support them
  • Inspection-data review and NDT method selection that give your RBI engineers measured corrosion rates rather than default rates
  • Flaw characterisation and sizing procedures (PAUT, TOFD) that meet the data requirements of your fitness-for-service engineers
  • ISO 17020 and ISO 17025 accreditation support, internal audit and pre-assessment against the standard the assessor will actually apply
  • Failure investigation, root-cause analysis and independent technical review where a finding becomes contentious

Codes and client regimes covered

ASME Section V, Section VIII and Section IX; ASME B31.1 and B31.3; AWS D1.1 and D1.5; API 510, API 570, API 653, API 577, API 578 and API 1104; ISO 17635, ISO 17636 and ISO 17640; NACE/AMPP MR0175 and MR0103 for sour service. Operator-specific approvals — Aramco, ADNOC, QatarEnergy, KOC, PETRONAS, Shell and similar — are prepared against the client's own vendor-qualification checklist rather than a generic template.

How engagements are structured

Turnaround for a procedure review or written-practice update is agreed in the proposal against your audit or contract date. Larger scopes, such as building a multi-method programme from nothing or preparing for a customer or accreditation audit, are scoped individually with a defined deliverable list. Work runs per-project or on retainer, and a retainer is usually the better arrangement once a company is being audited by more than one client.

What tends to be found first

  • A written practice that has not been reviewed since it was adopted, and no longer matches how the crews work
  • Technique sheets circulating in several uncontrolled versions beneath a controlled procedure
  • Certification records complete for the certificate but missing vision examinations or documented on-the-job hours
  • Calibration certificates held for instruments but not for probes, wedges and reference blocks — the most common ISO 17025 finding
  • No way to reconstruct which procedure revision applied to an inspection performed two years ago

Related: NDT consulting services · ASNT Level III consulting · inspection management software · NDT training. Request a consultation in Hawaii.

NDT Level III consulting for Hawaii: what can be done remotely and what needs a visit

For Hawaii inspection companies and asset owners, most NDT Level III work can be done remotely: written practices, procedures, technique sheets, certification records and audit preparation. Atlantis provides that as an outsourced ASNT NDT Level III service, schedules on-island visits after a scoping call, and keeps the scope plain: it is not an Authorized Inspection Agency and never signs as inspector of record.

Work that travels well. A written practice can be drafted or revised against SNT-TC-1A, reviewed with the company's managers on video and issued for signature without anyone flying. The same applies to method procedures and technique sheets, review of certification files for missing vision examinations or undocumented experience hours, review of inspection reports and data, and a mock client audit run against the company's own records. Outsourced ASNT Level III services, procedure development and SNT-TC-1A programme set-up describe each of these.

Work that needs a visit or a shipment. Practical examinations need specimens with known discontinuities, and those either travel with the examiner or are shipped ahead, which takes planning from the mainland. Reference blocks and calibration standards are in the same position, as is instrument calibration that has to be done off-island. Theory training can run online through NDT training in Hawaii, with practice on the Practical NDT simulator, so an on-island visit can concentrate on practical examinations.

Hawaii's regulators. The National Board lists the Department of Labor and Industrial Relations, through its Division of Occupational Safety and Health's Boiler and Elevator Inspection Branch, as Hawaii's boiler and pressure vessel jurisdiction. Hawaii is not an NRC Agreement State, so the NRC itself, through its Region IV office, licenses radioactive materials used for industrial radiography there. The NRC's industrial radiography rules in 10 CFR Part 34 carry their own radiographer certification requirement, separate from the employer's SNT-TC-1A certification, and a Hawaii radiography company's written practice has to sit alongside its NRC licence conditions without contradicting them. Consulting covers the NDT side; radiation safety officer duties stay with the licensee.

Practical points for planning Hawaii engagements:

  • Hawaii does not observe daylight saving time, so the gap to the mainland changes twice a year and meeting times should be fixed in Hawaii time.
  • Small island inspection companies often need a named Level III for audits rather than a full-time hire, which is the gap an outsourced service fills.
  • Federal and defence work follows the contracting agency's own NDT personnel requirements, which are checked before any commitment is made.

Certification records, instrument calibration and procedure revisions can be kept in Atlantis ERP certificate tracking, so an auditor can see which revision and which certification applied on a given date. To start a Hawaii engagement, request a scoping call.