NDT Level III Consulting & Training in Connecticut

Atlantis NDT provides ASNT Level III consulting and NDT training across Connecticut, led by an ASNT NDT Level III, for Pratt & Whitney jet engines, Sikorsky helicopters, Electric Boat submarines, Millstone nuclear. Serving Hartford, East Hartford, Stratford, Groton, New Haven and all Connecticut locations.

Industries in Connecticut

Level III-led support for Pratt & Whitney jet engines, Sikorsky helicopters, Electric Boat submarines, Millstone nuclear. Procedure, written-practice and report review can run remotely; onsite visits anywhere in Connecticut are scheduled after a scoping call.

NDT Training in Connecticut

ASNT SNT-TC-1A-based Level I, II, and III training for all 6 major NDT methods, Level III-led and delivered online, live-virtual, or onsite at your facility.

What an outsourced ASNT Level III actually does

Most inspection companies do not need a full-time Level III; they need the functions a Level III performs. Those are specific and separable: authoring and signing the written practice, developing and qualifying procedures for each method offered, examining and certifying Level I and Level II personnel, validating techniques and equipment, and being available and named when a client audits the programme. Engaged as a retained service, that covers the technical accountability without carrying the salary.

Service lines

Written practice authoring and revision to ASNT SNT-TC-1A, ANSI/ASNT CP-189, NAS 410 or ISO 9712, including the annual review most quality systems require and few actually perform
Procedure development and approval across UT, PAUT, TOFD, RT, MT, PT, ET and VT, written against the governing construction or in-service code and qualified on representative specimens
Personnel qualification and certification — general, specific and practical examinations, vision examination administration, and the experience-hour records that support them
Inspection-data review and NDT method selection that give your RBI engineers measured corrosion rates rather than default rates
Flaw characterisation and sizing procedures (PAUT, TOFD) that meet the data requirements of your fitness-for-service engineers
ISO 17020 and ISO 17025 accreditation support, internal audit and pre-assessment against the standard the assessor will actually apply
Failure investigation, root-cause analysis and expert-witness support where a finding becomes contentious

Codes and client regimes covered

ASME Section V, Section VIII and Section IX; ASME B31.1 and B31.3; AWS D1.1 and D1.5; API 510, API 570, API 653, API 577, API 578 and API 1104; ISO 17635, ISO 17636 and ISO 17640; NACE/AMPP MR0175 and MR0103 for sour service. Operator-specific approvals — Aramco, ADNOC, QatarEnergy, KOC, PETRONAS, Shell and similar — are prepared against the client's own vendor-qualification checklist rather than a generic template.

How engagements are structured

Most procedure reviews and written-practice updates are returned signed and stamped within two to five business days. Larger scopes — building a multi-method programme from nothing or preparing an ISO 17020 accreditation package — are scoped individually with a defined deliverable list. Work runs per-project or on retainer, and a retainer is usually the better arrangement once a company is being audited by more than one client.

What tends to be found first

A written practice that has not been reviewed since it was adopted, and no longer matches how the crews work
Technique sheets circulating in several uncontrolled versions beneath a controlled procedure
Certification records complete for the certificate but missing vision examinations or documented on-the-job hours
Calibration certificates held for instruments but not for probes, wedges and reference blocks — the most common ISO 17025 finding
No way to reconstruct which procedure revision applied to an inspection performed two years ago