Eddy Current Testing Services in Rotterdam

Professional Eddy Current Testing (ET) inspection services in Rotterdam. ASNT Level II & III certified inspectors specializing in heat exchanger tube inspection, surface crack detection and conductivity testing for oil & gas, aerospace, power generation, and manufacturing industries.

Why Choose Atlantis NDT for ET in Rotterdam?

Atlantis NDT provides certified Eddy Current Testing inspectors in Rotterdam with expertise in API 510/570/653 compliance, ASME Section V procedures, and AWS D1.1 weld inspection. Contact us for a free quote.

What Eddy Current Testing (ET) actually detects

Eddy current testing induces circulating currents in a conductive component and detects the impedance change caused by discontinuities. It is fast, requires no couplant, and works through thin coatings, which makes it the method of choice for tubing and surface crack detection on conductive materials.

Surface and near-surface cracking on conductive materials
Heat exchanger and condenser tube wall loss, pitting and cracking
Corrosion under thin coatings without removal
Conductivity and heat-treat verification on aluminium alloys
Weld toe cracking on painted structures

Codes and acceptance criteria applied

Examinations are performed to written procedures qualified against ASME Section V Article 8, ASTM E243, ASTM E571, ISO 15548 and EN 1711. Acceptance criteria are taken from the construction or in-service code governing the item — ASME Section VIII for pressure vessels, ASME B31.3 for process piping, API 510, API 570 and API 653 for in-service equipment, and AWS D1.1 for structural steel.

How the examination is controlled in Testing Rotterdam

Every examination carries its own evidence chain: the technician's certification for the method and level under ASNT SNT-TC-1A or ISO 9712, current on the day of the inspection; the calibration status of the instrument, probes and reference blocks used, traceable under ISO 17025; and the revision of the procedure and technique sheet in force at the time. That bundle is what a client audit examines, and it is recorded automatically rather than assembled afterwards.

Reporting and follow-up

Results are issued in the client's required format with indications located against the component and, where relevant, against a corrosion monitoring location so thickness trends stay continuous between campaigns. Findings can be delivered into the client's own maintenance system, or onto a 3D asset model where remaining life and risk-based inspection ranking update as new data arrives.