Ultrasonic Testing (UT) Weld Inspection Report
[Company name and logo] · Report no.: __________ · Page ___ of ___
Report header
| Report number and revision | |
|---|
| Date of examination | |
|---|
| Client / end user | |
|---|
| Project or job number | |
|---|
| Work order / PO reference | |
|---|
| Site and location | |
|---|
| Component / item ID | |
|---|
| Drawing number and revision | |
|---|
| Procedure number and revision | |
|---|
| Acceptance standard | |
|---|
| Extent of examination | |
|---|
Equipment and calibration
| Flaw detector (make, model, serial) | |
|---|
| Probes (serial, frequency, size, angle) | |
|---|
| Cables (type, length) | |
|---|
| Couplant (brand or type) | |
|---|
| Calibration / reference block | |
|---|
| Reference level and method | |
|---|
| Scanning sensitivity and transfer correction | |
|---|
| Scan surface and surface condition | |
|---|
| Part temperature | |
|---|
Indication record
| Weld ID | Ind. no. | Position from datum (mm) | Depth (mm) | Length (mm) | Max amplitude (% DAC) | Probe | Evaluation | Result |
|---|
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
Remarks
Personnel and sign-off
| Examined by (name, method, level, scheme) | |
|---|
| Certificate number and expiry | |
|---|
| Reviewed / interpreted by (Level II or III) | |
|---|
| Client or third-party inspector | |
|---|
| Signatures and dates | |
|---|