Phased Array Ultrasonic Testing (PAUT) Report
[Company name and logo] · Report no.: __________ · Page ___ of ___
Report header
| Report number and revision | |
|---|
| Date of examination | |
|---|
| Client / end user | |
|---|
| Project or job number | |
|---|
| Work order / PO reference | |
|---|
| Site and location | |
|---|
| Component / item ID | |
|---|
| Drawing number and revision | |
|---|
| Procedure number and revision | |
|---|
| Acceptance standard | |
|---|
| Extent of examination | |
|---|
Setup, calibration and scan plan
| Instrument and software version | |
|---|
| Probe (elements, pitch, frequency, serial) | |
|---|
| Wedge (angle, velocity, serial) | |
|---|
| Focal laws | |
|---|
| Calibration (velocity, wedge delay, sensitivity, TCG) | |
|---|
| Encoder and check | |
|---|
| Scan plan reference | |
|---|
| Index offsets / scans per side | |
|---|
| Data file(s) | |
|---|
Indication table
| Weld ID | Ind. no. | Scan position X (mm) | Index offset Y (mm) | Depth start–end (mm) | Length (mm) | Height (mm) | Amplitude | Classification | Result |
|---|
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
Remarks
Personnel and sign-off
| Examined by (name, method, level, scheme) | |
|---|
| Certificate number and expiry | |
|---|
| Reviewed / interpreted by (Level II or III) | |
|---|
| Client or third-party inspector | |
|---|
| Signatures and dates | |
|---|