{"id":"151","title":"Adhesive Bond Inspection: Disbonds, Voids and Weak Bonds","slug":"adhesive-bond-line-inspection-techniques","date":"March 2026","author":"Atlantis NDT","category":"Inspection Applications","metaDescription":"Choose bond inspection around the joint design, reference specimens and detection limits. Understand why an ultrasonic image does not prove bond strength.","snippet":"Choose bond inspection around the joint design, reference specimens and detection limits. Understand why an ultrasonic image does not prove bond strength.","content":"<p>An adhesive joint can contain a void, a separated interface or a weak bond that remains in intimate contact. Those conditions do not necessarily produce the same inspection response. A useful inspection plan begins by naming the condition it must detect, rather than asking for a general &#x201C;bond quality scan&#x201D;.</p><section><h2>Separate missing adhesion from missing material</h2><p>Ultrasonic inspection can help map changes at an interface, while other techniques may suit particular skins, cores or access arrangements. A clear image of a void is not evidence that every remaining part of the joint has adequate strength. NASA&#x2019;s Orion heatshield work illustrates why intimate-contact unbonds can challenge conventional inspection.</p><p>Surface preparation, adhesive storage, mixing and cure records therefore remain part of the evidence. NDT cannot recover a missing manufacturing history or substitute for a qualified bonding process.</p></section><section><h2>Demonstrate the technique on the actual joint</h2><p>Document the adherend materials, thicknesses, adhesive layer, curvature and accessible surfaces. Ask whether the reference specimen represents those features and the flaw types of concern. A flat coupon with a convenient insert may not establish performance on a curved production assembly.</p><p>Agree the scanned area and how edges, stiffeners and inaccessible regions will be marked. Keep the original data and the settings needed to reproduce the examination.</p></section><section><h2>Report what the result establishes</h2><p>Distinguish an indication from a confirmed disbond, and an inspected area from an unexamined area. Record the location system, reference checks, indication dimensions and interpretation limits. The responsible engineering authority should define acceptance and any confirmatory work; a generic pressure-vessel or piping limit does not apply to an adhesive joint by default.</p></section><section><h2>References and next steps</h2><p><a href=\"https://www.nasa.gov/missions/artemis/orion/bond-quality-inspection-for-orion-heatshield-blocks/\">NASA&#x2019;s Orion bond-inspection study</a> provides further background. Use the governing specification and approved procedure for the actual job.</p><p><a href=\"/consulting/ndt-consulting-level-iii\">Discuss the examination scope</a>. Include the component, material, service history and decision the inspection needs to support.</p></section>","updatedAt":"2026-10-12T00:00:00Z"}